Not ratedCVE-2026-99228

    Linux Kernel: security vulnerability (CVE-2026-99228)

    Published Last modified Sources: BSI, CVE.org

    Share

    What is affected, what to do

    In the Linux kernel, the following vulnerability has been resolved: io_uring/io-wq: don't lose the signal that ends work When a thread exits, only its tracked requests are cancelled. Then its io-wq is torn down. io_wq_exit_workers() signals every worker, to get it out of an interruptible sleep, and waits for all of them to exit.

    Update Linux Kernel to version 6.1.191, Linux Kernel to version 6.6.161, Linux Kernel to version 6.12.115.

    Affected
    • Linux Kernel lt 5.12..6.1.191
    • Linux Kernel lt 6.2..6.6.161
    • Linux Kernel lt 6.7..6.12.115
    • Linux Kernel lt 6.13..6.18.60
    • Linux Kernel lt 6.19..7.2.14
    • Linux Kernel lt 7.3..7.3.2
    • Linux Kernel lt 7.4..7.4-rc1
    Fixed in
    • Linux Kernel 6.1.191
    • Linux Kernel 6.6.161
    • Linux Kernel 6.12.115
    • Linux Kernel 6.18.60
    • Linux Kernel 7.2.14
    • Linux Kernel 7.3.2
    • Linux Kernel 7.4-rc1

    Not sure whether and how you are affected? Ask a question about this vulnerability

    Metrics

    —

    Priority

    No value is available for this vulnerability.

    —

    CVSS v3

    No value is available for this vulnerability.

    0.2 %

    EPSS score

    Low — model estimates < 1% exploitation likelihood.

    Source: FIRST EPSS, percentile 5.3

    Show all metrics
    Severity
    Not rated
    Priority (0–325)

    The priority score is a consolidated metric that condenses several individual signals into a single, action-guiding ranking: technical severity (CVSS), exploitation likelihood (EPSS), known-exploited status (KEV) and the context of the affected asset. The aim is to answer the only truly important question in vulnerability management: what first?

    Read in glossary
    30.23 Methodology
    Exploit maturity

    An exploit is code or a technique that specifically uses a concrete vulnerability to force unintended behaviour — such as executing code or escalating privileges. It is the tool that turns a theoretical flaw into a practical attack.

    Read in glossary
    no public PoC known
    EPSS score

    The EPSS score is the absolute model output for an individual vulnerability: the estimated probability of real-world exploitation within the next 30 days, expressed as a value between 0 and 1 (i.e. 0 % to 100 %). A score of 0.42 means „the model estimates a 42 % chance of real-world exploitation within 30 days“.

    Read in glossary
    0.2 %
    Low — model estimates < 1% exploitation likelihood.
    EPSS percentile

    The EPSS percentile is the relative position of a vulnerability within all EPSS-scored CVEs, expressed as a value between 0 and 1. A percentile of 0.90 means „this CVE has a higher EPSS score than 90 % of all other scored CVEs“. Unlike the EPSS score, it is not a probability — but a positioning within a ranking.

    Read in glossary
    5.3
    Low — this CVE sits in the lower 10% of all CVEs scored today.
    KEV status

    The KEV catalogue is a list maintained by the US authority CISA of vulnerabilities for which active exploitation in the wild has been confirmed. It answers not the question „how severe?“ but „is it already being attacked?“ — thereby sharply prioritising patching.

    Read in glossary
    —
    Published

    Detection rules

    No NEOSEC detection rule is available for this vulnerability yet.

    Classification under NIS2 and CRA

    Rule-based classification from exploitation status and severity. It does not replace a case-by-case assessment.

    NIS2

    NIS2 is EU Directive (EU) 2022/2555 to raise the level of cybersecurity across the Union. It substantially broadens obligations compared with the first NIS directive: more sectors, mandatory risk management, staged reporting duties and personal accountability of senior management.

    Read in glossary
    Handle the vulnerability in regular vulnerability handling under Art. 21(2)(e) NIS2.
    CRA

    The CRA is EU Regulation (EU) 2024/2847 setting horizontal cybersecurity requirements for „products with digital elements“ — from industrial controllers and software to connected consumer devices. For the first time manufacturers must ensure security across the entire product lifecycle, handle vulnerabilities and provide security updates.

    Read in glossary
    From 11.12.2027, Annex I Part II CRA requires manufacturers of affected products with digital elements to handle vulnerabilities without delay and provide security updates.
    ISO/IEC 27001

    ISO/IEC 27001 is the internationally leading standard for an information security management system (ISMS). It describes a risk-based, process-oriented framework to systematically plan, implement, review and improve information security.

    Read in glossary
    Control A.8.8, management of technical vulnerabilities: assess relevance to your systems, plan remediation and keep evidence.

    Description

    In the Linux kernel, the following vulnerability has been resolved: io_uring/io-wq: don't lose the signal that ends work When a thread exits, only its tracked requests are cancelled. Then its io-wq is torn down. io_wq_exit_workers() signals every worker, to get it out of an interruptible sleep, and waits for all of them to exit. Before they do, they go through the work that is left. Unbounded work is cancelled. Bounded work is run, as it is expected to end by itself. Not all of it does. An open has no file yet, so it counts as bounded, and the open of a FIFO waits for the other end. That is what the signal is for. But the workers are signalled once, and a worker that hasn't started the work by then loses the signal: io_wq_exit_workers() io_worker_handle_work() io_wq_worker_wake() set TIF_NOTIFY_SIGNAL io_assign_current_work() io_run_task_work() clear TIF_NOTIFY_SIGNAL io_wq_submit_work() fifo_open() wait_for_partner() wait_for_completion_timeout() The thread never gets out of do_exit(): IORING_OP_OPENAT of a FIFO without a writer, IOSQE_ASYNC exit of the thread that has submitted it hangs in more than 9 of 10 attempts (4 CPUs, KVM), until the process is killed. Set TIF_NOTIFY_SIGNAL for bounded work that is started with IO_WQ_BIT_EXIT set. The bit is set before the workers are signalled, and it is tested after the flag has been cleared, with clear_notify_signal() providing the barrier. So either the flag stays, or the bit is seen. Work that is started while the io-wq exits is treated like work that is being run at that time: it isn't interrupted unless it waits interruptibly.

    Source: BSI WID Portal, BSI CSAF, cvelistv5, NVD (NIST)

    Affected products

    The following versions are affected. Older releases of the same product line are also vulnerable unless stated otherwise.

    Affected products
    Affected versionsFixed in
    LinuxLinux
    • 6.7 – < 6.12.115
    • 6.13 – < 6.18.60
    • 6.2 – < 6.6.161
    • 6.19 – < 7.2.14
    • 7.3 – < 7.3.2
    • 7.4 – < 7.4-rc1
    • 5.12 – < 6.1.191
    • 6.12.115
    • 6.18.60
    • 6.6.161
    • 7.2.14
    • 7.3.2
    • 7.4-rc1
    • 6.1.191

    Vendors and products

    References & sources

    Changes to this CVE

    Who changed this CVE and when: NVD (analysis, affected products, CVSS), the CVE publisher (CNA) and additional providers such as CISA (ADP).

    1. Record modifiedLinux

      Show 2 original changes
      Individual changes of this event as published by NVD
      TypeActionBeforeAfter
      Affected versions (publisher)added
      —
      Affected value modified. <a href="https://github.com/CVEProject/cvelistV5/blob/main/cves/2026/99xxx/CVE-2026-99228.json">CVE-2026-99228</a>
      Referenceadded
      —
      https://git.kernel.org/stable/c/7df9a3b5eda51c512d3dd138e3b7daa525071757

      Source identifier: 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    2. Record modifiedLinux

      Show 2 original changes
      Individual changes of this event as published by NVD
      TypeActionBeforeAfter
      Affected versions (publisher)added
      —
      Affected value modified. <a href="https://github.com/CVEProject/cvelistV5/blob/main/cves/2026/99xxx/CVE-2026-99228.json">CVE-2026-99228</a>
      Referenceadded
      —
      https://git.kernel.org/stable/c/63c103279a95e82280092f2f4232e91e8117a252

      Source identifier: 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    3. ReceivedLinux

      Description added or changed

      Show 7 original changes
      Individual changes of this event as published by NVD
      TypeActionBeforeAfter
      Descriptionadded
      —
      In the Linux kernel, the following vulnerability has been resolved: io_uring/io-wq: don't lose the signal that ends work When a thread exits, only its tracked requests are cancelled. Then its io-wq is torn down. io_wq_exit_workers() signals every worker, to get it out of an interruptible sleep, and waits for all of them to exit. Before they do, they go through the work that is left. Unbounded work is cancelled. Bounded work is run, as it is expected to end by itself. Not all of it does. An open has no file yet, so it counts as bounded, and the open of a FIFO waits for the other end. That is what the signal is for. But the workers are signalled once, and a worker that hasn't started the work by then loses the signal: io_wq_exit_workers() io_worker_handle_work() io_wq_worker_wake() set TIF_NOTIFY_SIGNAL io_assign_current_work() io_run_task_work() clear TIF_NOTIFY_SIGNAL io_wq_submit_work() fifo_open() wait_for_partner() wait_for_completion_timeout() The thread never gets out of do_exit(): IORING_OP_OPENAT of a FIFO without a writer, IOSQE_ASYNC exit of the thread that has submitted it hangs in more than 9 of 10 attempts (4 CPUs, KVM), until the process is killed. Set TIF_NOTIFY_SIGNAL for bounded work that is started with IO_WQ_BIT_EXIT set. The bit is set before the workers are signalled, and it is tested after the flag has been cleared, with clear_notify_signal() providing the barrier. So either the flag stays, or the bit is seen. Work that is started while the io-wq exits is treated like work that is being run at that time: it isn't interrupted unless it waits interruptibly.
      Affected versions (publisher)added
      —
      New affected value received. <a href="https://github.com/CVEProject/cvelistV5/blob/main/cves/2026/99xxx/CVE-2026-99228.json">CVE-2026-99228</a>
      Referenceadded
      —
      https://git.kernel.org/stable/c/08c42055b8f9a5d29236d34ad4bce08828239fe1
      Referenceadded
      —
      https://git.kernel.org/stable/c/62996803c1b5f18176de255db4c843021f2d19c8
      Referenceadded
      —
      https://git.kernel.org/stable/c/7309fea05a3d66af9746843c43fef14c10b8141e
      Referenceadded
      —
      https://git.kernel.org/stable/c/ddccc60f036b309430cf130d48aafed94ef7355a
      Referenceadded
      —
      https://git.kernel.org/stable/c/fdb771015c1e13677b57a4015f0c938748f13781

      Source identifier: 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    Embed badge

    Show the severity and KEV status of this vulnerability on your site – with a link back here. The image is updated hourly.

    Badge preview for CVE-2026-99228
    <a href="https://intel.neosec.eu/en/cve/CVE-2026-99228"><img src="https://intel.neosec.eu/badge/cve/CVE-2026-99228.svg?lang=en" alt="CVE-2026-99228 – NEOSEC Intel" height="20"></a>