MediumCVE-2026-99166

    Linux Kernel: security vulnerability (CVE-2026-99166)

    Published Last modified Sources: Debian, Msrc Update Guide, CVE.org, BSI

    Share

    What is affected, what to do

    In the Linux kernel, the following vulnerability has been resolved: net: rds: fix uninitialized trans dereference in CM event handler rds_rdma_cm_event_handler_cmn() assigns trans only when the RDMA device is an InfiniBand CA (RDMA_NODE_IB_CA). On any other device type, e.g. an iWARP RNIC such as siw, trans stays uninitialized, but the event switch dereferences it: unconditionally in the RDMA_CM_EVENT_CONNECT_REQUEST case via trans->cm_handle_connect(), and (with a connection context) in the ROUTE_RESOLVED and ESTABLISHED cases.

    Update Linux Kernel to version 5.10.273, Linux Kernel to version 5.15.224, Linux Kernel to version 6.1.191.

    Affected
    • Linux Kernel lt 4.6..5.10.273
    • Linux Kernel lt 5.11..5.15.224
    • Linux Kernel lt 5.16..6.1.191
    • Linux Kernel lt 6.2..6.6.161
    • Linux Kernel lt 6.7..6.12.115
    • Linux Kernel lt 6.13..6.18.59
    • Linux Kernel lt 6.19..7.2.13
    Fixed in
    • Linux Kernel 5.10.273
    • Linux Kernel 5.15.224
    • Linux Kernel 6.1.191
    • Linux Kernel 6.6.161
    • Linux Kernel 6.12.115
    • Linux Kernel 6.18.59
    • Linux Kernel 7.2.13
    • Linux Kernel 7.3

    Not sure whether and how you are affected? Ask a question about this vulnerability

    Metrics

    5.5

    Priority

    XIEM Effective CVSS: highest available CVSS rating from NVD and vendor data.

    Source: Vendor (CNA), CVSS v3

    5.5

    CVSS v3

    Severity Medium on the scale from 0 to 10.

    Source: Debian, Msrc Update Guide, CVE.org, BSI

    0.2 %

    EPSS score

    Low — model estimates < 1% exploitation likelihood.

    Source: FIRST EPSS, percentile 8.0

    Show all metrics
    Severity
    Medium
    Priority (0–325)

    The priority score is a consolidated metric that condenses several individual signals into a single, action-guiding ranking: technical severity (CVSS), exploitation likelihood (EPSS), known-exploited status (KEV) and the context of the affected asset. The aim is to answer the only truly important question in vulnerability management: what first?

    Read in glossary
    58.01 Methodology
    Exploit maturity

    An exploit is code or a technique that specifically uses a concrete vulnerability to force unintended behaviour — such as executing code or escalating privileges. It is the tool that turns a theoretical flaw into a practical attack.

    Read in glossary
    no public PoC known
    XIEM Effective CVSS

    XIEM® is the tiered managed-security operating model from NEOSEC and a registered trademark of NEOSEC GmbH. It extends classic SIEM — the central collection, normalisation and correlation of security-relevant events — with endpoint forensics, network visibility and deception technology, and consolidates them into three building tiers: Sentry, Orchestrate and Command.

    Read in glossary
    5.5 Methodology
    CVSS v3

    CVSS is the globally established, open standard for assessing the technical severity of a vulnerability on a scale from 0 to 10. It describes how easily a flaw can be exploited and what damage it can cause — but not how likely its actual exploitation is. CVSS and the complementary EPSS deliberately answer different questions.

    Read in glossary
    5.5
    EPSS score

    The EPSS score is the absolute model output for an individual vulnerability: the estimated probability of real-world exploitation within the next 30 days, expressed as a value between 0 and 1 (i.e. 0 % to 100 %). A score of 0.42 means „the model estimates a 42 % chance of real-world exploitation within 30 days“.

    Read in glossary
    0.2 %
    Low — model estimates < 1% exploitation likelihood.
    EPSS percentile

    The EPSS percentile is the relative position of a vulnerability within all EPSS-scored CVEs, expressed as a value between 0 and 1. A percentile of 0.90 means „this CVE has a higher EPSS score than 90 % of all other scored CVEs“. Unlike the EPSS score, it is not a probability — but a positioning within a ranking.

    Read in glossary
    8.0
    Low — this CVE sits in the lower 10% of all CVEs scored today.
    KEV status

    The KEV catalogue is a list maintained by the US authority CISA of vulnerabilities for which active exploitation in the wild has been confirmed. It answers not the question „how severe?“ but „is it already being attacked?“ — thereby sharply prioritising patching.

    Read in glossary
    —
    Published

    Detection rules

    No NEOSEC detection rule is available for this vulnerability yet.

    Classification under NIS2 and CRA

    Rule-based classification from exploitation status and severity. It does not replace a case-by-case assessment.

    NIS2

    NIS2 is EU Directive (EU) 2022/2555 to raise the level of cybersecurity across the Union. It substantially broadens obligations compared with the first NIS directive: more sectors, mandatory risk management, staged reporting duties and personal accountability of senior management.

    Read in glossary
    Handle the vulnerability in regular vulnerability handling under Art. 21(2)(e) NIS2.
    CRA

    The CRA is EU Regulation (EU) 2024/2847 setting horizontal cybersecurity requirements for „products with digital elements“ — from industrial controllers and software to connected consumer devices. For the first time manufacturers must ensure security across the entire product lifecycle, handle vulnerabilities and provide security updates.

    Read in glossary
    From 11.12.2027, Annex I Part II CRA requires manufacturers of affected products with digital elements to handle vulnerabilities without delay and provide security updates.
    ISO/IEC 27001

    ISO/IEC 27001 is the internationally leading standard for an information security management system (ISMS). It describes a risk-based, process-oriented framework to systematically plan, implement, review and improve information security.

    Read in glossary
    Control A.8.8, management of technical vulnerabilities: assess relevance to your systems, plan remediation and keep evidence.

    Description

    In the Linux kernel, the following vulnerability has been resolved: net: rds: fix uninitialized trans dereference in CM event handler rds_rdma_cm_event_handler_cmn() assigns trans only when the RDMA device is an InfiniBand CA (RDMA_NODE_IB_CA). On any other device type, e.g. an iWARP RNIC such as siw, trans stays uninitialized, but the event switch dereferences it: unconditionally in the RDMA_CM_EVENT_CONNECT_REQUEST case via trans->cm_handle_connect(), and (with a connection context) in the ROUTE_RESOLVED and ESTABLISHED cases. An RDS listener on an iWARP device therefore crashes the kernel as soon as a connect request arrives: with CONFIG_INIT_STACK_ALL_ZERO the wild load becomes a NULL dereference at offset 0xa0 (&trans->cm_handle_connect) in the iw_cm_wq workqueue. GCC masks the bug in default builds by folding the uninitialized load into &rds_ib_transport; Clang-built kernels take the real uninitialized path and oops. The active side can land on a non-IB device too: the id that rds_ib_conn_path_connect() creates is not restricted to a node type, so rdma_resolve_addr() binds it to whichever device serves the local address, and an iWARP RNIC on the same netdev qualifies. The crash there is different: resolving a route on an iWARP id never fills in cm_id->route.path_rec, and the ROUTE_RESOLVED case writes path_rec[0].sl before it calls into the transport. The iWARP transport was dropped long ago and IB is the only transport left, so make that explicit: initialize trans to &rds_ib_transport at declaration, drop the conditional assignment, reject a connect request that arrives on a non-IB device, and drop a connection whose address resolved to one instead of resolving a route on it. The rejection is limited to RDMA_CM_EVENT_CONNECT_REQUEST on purpose: a non-zero return from the handler makes rdma_cm destroy the id the event was delivered on, which is right for the request's freshly created id but would free a connection id that RDS still owns for any other event. On the active side the id stays ic->i_cm_id and the connection's shutdown destroys it, so that case returns 0. [achender: reject only on RDMA_CM_EVENT_CONNECT_REQUEST instead of bailing out for every event on a non-IB device, so that rdma_cm does not destroy connection ids RDS still tracks; drop a connection whose address resolved to a non-IB device before a route is resolved on it; changelog adjusted]

    Source: Debian Security Advisories, Microsoft Security Update Guide, cvelistv5, NVD (NIST), BSI WID Portal, BSI CSAF

    Affected products

    The following versions are affected. Older releases of the same product line are also vulnerable unless stated otherwise.

    Affected products
    Affected versionsFixed in
    LinuxLinux
    • 6.7 – < 6.12.115
    • 6.19 – < 7.2.13
    • 5.11 – < 5.15.224
    • 5.16 – < 6.1.191
    • 4.6 – < 5.10.273
    • 6.13 – < 6.18.59
    • —
    • 6.2 – < 6.6.161
    • 6.12.115
    • 7.2.13
    • 5.15.224
    • 6.1.191
    • 5.10.273
    • 6.18.59
    • 7.3
    • 6.6.161

    Vendors and products

    Affected operating systems

    Affected operating systems
    Linuxdebianlinuxtrixie

    References & sources

    Changes to this CVE

    Who changed this CVE and when: NVD (analysis, affected products, CVSS), the CVE publisher (CNA) and additional providers such as CISA (ADP).

    1. Record modifiedLinux

      Show 6 original changes
      Individual changes of this event as published by NVD
      TypeActionBeforeAfter
      Affected versions (publisher)added
      —
      Affected value modified. <a href="https://github.com/CVEProject/cvelistV5/blob/main/cves/2026/99xxx/CVE-2026-99166.json">CVE-2026-99166</a>
      Referenceadded
      —
      https://git.kernel.org/stable/c/074bb7cdc3e26afa698888ba56fc1df0e3f24650
      Referenceadded
      —
      https://git.kernel.org/stable/c/0d15e853aa88da5375edd32b39d08a048b64a1c5
      Referenceadded
      —
      https://git.kernel.org/stable/c/8973f70cb068012d83cff1cfa3f45ef94ab02267
      Referenceadded
      —
      https://git.kernel.org/stable/c/8c77774535c3d6162929521a6fa11e3db086fa32
      Referenceadded
      —
      https://git.kernel.org/stable/c/a2fde862b98db8908e2ebaffbb35a75a0e9d5b33

      Source identifier: 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    2. ReceivedLinux

      Description added or changed

      Show 5 original changes
      Individual changes of this event as published by NVD
      TypeActionBeforeAfter
      Descriptionadded
      —
      In the Linux kernel, the following vulnerability has been resolved: net: rds: fix uninitialized trans dereference in CM event handler rds_rdma_cm_event_handler_cmn() assigns trans only when the RDMA device is an InfiniBand CA (RDMA_NODE_IB_CA). On any other device type, e.g. an iWARP RNIC such as siw, trans stays uninitialized, but the event switch dereferences it: unconditionally in the RDMA_CM_EVENT_CONNECT_REQUEST case via trans->cm_handle_connect(), and (with a connection context) in the ROUTE_RESOLVED and ESTABLISHED cases. An RDS listener on an iWARP device therefore crashes the kernel as soon as a connect request arrives: with CONFIG_INIT_STACK_ALL_ZERO the wild load becomes a NULL dereference at offset 0xa0 (&trans->cm_handle_connect) in the iw_cm_wq workqueue. GCC masks the bug in default builds by folding the uninitialized load into &rds_ib_transport; Clang-built kernels take the real uninitialized path and oops. The active side can land on a non-IB device too: the id that rds_ib_conn_path_connect() creates is not restricted to a node type, so rdma_resolve_addr() binds it to whichever device serves the local address, and an iWARP RNIC on the same netdev qualifies. The crash there is different: resolving a route on an iWARP id never fills in cm_id->route.path_rec, and the ROUTE_RESOLVED case writes path_rec[0].sl before it calls into the transport. The iWARP transport was dropped long ago and IB is the only transport left, so make that explicit: initialize trans to &rds_ib_transport at declaration, drop the conditional assignment, reject a connect request that arrives on a non-IB device, and drop a connection whose address resolved to one instead of resolving a route on it. The rejection is limited to RDMA_CM_EVENT_CONNECT_REQUEST on purpose: a non-zero return from the handler makes rdma_cm destroy the id the event was delivered on, which is right for the request's freshly created id but would free a connection id that RDS still owns for any other event. On the active side the id stays ic->i_cm_id and the connection's shutdown destroys it, so that case returns 0. [achender: reject only on RDMA_CM_EVENT_CONNECT_REQUEST instead of bailing out for every event on a non-IB device, so that rdma_cm does not destroy connection ids RDS still tracks; drop a connection whose address resolved to a non-IB device before a route is resolved on it; changelog adjusted]
      Affected versions (publisher)added
      —
      New affected value received. <a href="https://github.com/CVEProject/cvelistV5/blob/main/cves/2026/99xxx/CVE-2026-99166.json">CVE-2026-99166</a>
      Referenceadded
      —
      https://git.kernel.org/stable/c/492ba6ac1b1ffb8a06ff52db0825c1af2cdb28c8
      Referenceadded
      —
      https://git.kernel.org/stable/c/5f23e4e3a31dacfd82a8f56be253adc0910ee84f
      Referenceadded
      —
      https://git.kernel.org/stable/c/ca14c289ed9ffed6cc64290d039e923e5720a8bf

      Source identifier: 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    Embed badge

    Show the severity and KEV status of this vulnerability on your site – with a link back here. The image is updated hourly.

    Badge preview for CVE-2026-99166
    <a href="https://intel.neosec.eu/en/cve/CVE-2026-99166"><img src="https://intel.neosec.eu/badge/cve/CVE-2026-99166.svg?lang=en" alt="CVE-2026-99166 – NEOSEC Intel" height="20"></a>