MediumCVE-2026-99039

    Linux Kernel: Use-After-Free (CVE-2026-99039)

    Published Last modified Sources: Msrc Update Guide, CVE.org, BSI

    What is affected, what to do

    In the Linux kernel, the following vulnerability has been resolved: memstick: core: wait for request completion before freeing card In memstick_alloc_card() and memstick_set_rw_addr(), wait_for_completion_timeout() is used to wait for device identification and address configuration requests to complete. The memstick subsystem does not provide an abort or cancellation callback in struct memstick_host for in-flight requests.

    Update Linux Kernel to version 5.10.273, Linux Kernel to version 5.15.224, Linux Kernel to version 6.1.191.

    Affected
    • Linux Kernel lt 2.6.25..5.10.273
    • Linux Kernel lt 5.11..5.15.224
    • Linux Kernel lt 5.16..6.1.191
    • Linux Kernel lt 6.2..6.6.160
    • Linux Kernel lt 6.7..6.12.113
    • Linux Kernel lt 6.13..6.18.57
    • Linux Kernel lt 6.19..7.2.11
    Fixed in
    • Linux Kernel 5.10.273
    • Linux Kernel 5.15.224
    • Linux Kernel 6.1.191
    • Linux Kernel 6.6.160
    • Linux Kernel 6.12.113
    • Linux Kernel 6.18.57
    • Linux Kernel 7.2.11
    • Linux Kernel 7.3

    Not sure whether and how you are affected? Ask a question about this vulnerability

    Metrics

    5.7

    Priority

    XIEM Effective CVSS: highest available CVSS rating from NVD and vendor data.

    Source: Vendor (CNA), CVSS v3

    5.7

    CVSS v3

    Severity Medium on the scale from 0 to 10.

    Source: Msrc Update Guide, CVE.org, BSI

    0.2 %

    EPSS score

    Low — model estimates < 1% exploitation likelihood.

    Source: FIRST EPSS, percentile 7.3

    Show all metrics
    Severity
    Medium
    Priority (0–325)

    The priority score is a consolidated metric that condenses several individual signals into a single, action-guiding ranking: technical severity (CVSS), exploitation likelihood (EPSS), known-exploited status (KEV) and the context of the affected asset. The aim is to answer the only truly important question in vulnerability management: what first?

    Read in glossary
    58.93 Methodology
    Exploit maturity

    An exploit is code or a technique that specifically uses a concrete vulnerability to force unintended behaviour — such as executing code or escalating privileges. It is the tool that turns a theoretical flaw into a practical attack.

    Read in glossary
    no public PoC known
    XIEM Effective CVSS

    XIEM® is the tiered managed-security operating model from NEOSEC and a registered trademark of NEOSEC GmbH. It extends classic SIEM — the central collection, normalisation and correlation of security-relevant events — with endpoint forensics, network visibility and deception technology, and consolidates them into three building tiers: Sentry, Orchestrate and Command.

    Read in glossary
    5.7 Methodology
    CVSS v3

    CVSS is the globally established, open standard for assessing the technical severity of a vulnerability on a scale from 0 to 10. It describes how easily a flaw can be exploited and what damage it can cause — but not how likely its actual exploitation is. CVSS and the complementary EPSS deliberately answer different questions.

    Read in glossary
    5.7
    EPSS score

    The EPSS score is the absolute model output for an individual vulnerability: the estimated probability of real-world exploitation within the next 30 days, expressed as a value between 0 and 1 (i.e. 0 % to 100 %). A score of 0.42 means „the model estimates a 42 % chance of real-world exploitation within 30 days“.

    Read in glossary
    0.2 %
    Low — model estimates < 1% exploitation likelihood.
    EPSS percentile

    The EPSS percentile is the relative position of a vulnerability within all EPSS-scored CVEs, expressed as a value between 0 and 1. A percentile of 0.90 means „this CVE has a higher EPSS score than 90 % of all other scored CVEs“. Unlike the EPSS score, it is not a probability — but a positioning within a ranking.

    Read in glossary
    7.3
    Low — this CVE sits in the lower 10% of all CVEs scored today.
    KEV status

    The KEV catalogue is a list maintained by the US authority CISA of vulnerabilities for which active exploitation in the wild has been confirmed. It answers not the question „how severe?“ but „is it already being attacked?“ — thereby sharply prioritising patching.

    Read in glossary
    —
    Published

    Detection rules

    No NEOSEC detection rule is available for this vulnerability yet.

    Classification under NIS2 and CRA

    Rule-based classification from exploitation status and severity. It does not replace a case-by-case assessment.

    NIS2

    NIS2 is EU Directive (EU) 2022/2555 to raise the level of cybersecurity across the Union. It substantially broadens obligations compared with the first NIS directive: more sectors, mandatory risk management, staged reporting duties and personal accountability of senior management.

    Read in glossary
    Handle the vulnerability in regular vulnerability handling under Art. 21(2)(e) NIS2.
    CRA

    The CRA is EU Regulation (EU) 2024/2847 setting horizontal cybersecurity requirements for „products with digital elements“ — from industrial controllers and software to connected consumer devices. For the first time manufacturers must ensure security across the entire product lifecycle, handle vulnerabilities and provide security updates.

    Read in glossary
    From 11.12.2027, Annex I Part II CRA requires manufacturers of affected products with digital elements to handle vulnerabilities without delay and provide security updates.
    ISO/IEC 27001

    ISO/IEC 27001 is the internationally leading standard for an information security management system (ISMS). It describes a risk-based, process-oriented framework to systematically plan, implement, review and improve information security.

    Read in glossary
    Control A.8.8, management of technical vulnerabilities: assess relevance to your systems, plan remediation and keep evidence.

    Description

    In the Linux kernel, the following vulnerability has been resolved: memstick: core: wait for request completion before freeing card In memstick_alloc_card() and memstick_set_rw_addr(), wait_for_completion_timeout() is used to wait for device identification and address configuration requests to complete. The memstick subsystem does not provide an abort or cancellation callback in struct memstick_host for in-flight requests. If wait_for_completion_timeout() expires (for instance, when a USB transfer or command retry is delayed), memstick_alloc_card() returns an error and frees the memstick_dev structure via kfree(card). However, the host controller driver (such as rtsx_usb_ms) is still running the request asynchronously in worker context. When the transfer eventually finishes, the driver writes into host->req->data, which points to memory inside the already freed card structure. This leads to a KASAN slab-use-after-free write: BUG: KASAN: slab-use-after-free in ms_read_bytes+0x8fe/0x990 Write of size 1 at addr ffff88813c188079 by task kworker/1:5/5239 Workqueue: events rtsx_usb_ms_handle_req Call Trace: ms_read_bytes+0x8fe/0x990 drivers/memstick/host/rtsx_usb_ms.c:450 rtsx_usb_ms_issue_cmd drivers/memstick/host/rtsx_usb_ms.c:477 [inline] rtsx_usb_ms_handle_req+0x557/0x1a00 drivers/memstick/host/rtsx_usb_ms.c:531 process_one_work+0xac7/0x1b10 kernel/workqueue.c:3396 worker_thread+0x5ef/0xe50 kernel/workqueue.c:3560 kthread+0x373/0x450 kernel/kthread.c:436 Allocated by task 1662: memstick_alloc_card drivers/memstick/core/memstick.c:383 [inline] memstick_check+0x2c1/0x10d0 drivers/memstick/core/memstick.c:452 process_one_work+0xac7/0x1b10 kernel/workqueue.c:3396 Freed by task 1662: kfree+0x20c/0x650 mm/slub.c:6792 memstick_alloc_card drivers/memstick/core/memstick.c:420 [inline] memstick_check+0x72b/0x10d0 drivers/memstick/core/memstick.c:452 process_one_work+0xac7/0x1b10 kernel/workqueue.c:3396 Host controller drivers (rtsx_usb_ms, jmb38x_ms, tifm_ms, r592) already implement their own hardware and bus timeouts, and callers in mspro_block and ms_block already rely on wait_for_completion() unconditionally. Replace wait_for_completion_timeout() with wait_for_completion() in memstick_set_rw_addr() and memstick_alloc_card() so that the card structure is never freed while an asynchronous request is in flight.

    Source: Microsoft Security Update Guide, cvelistv5, NVD (NIST), BSI CSAF, BSI WID Portal

    Affected products

    The following versions are affected. Older releases of the same product line are also vulnerable unless stated otherwise.

    Affected products
    Affected versionsFixed in
    LinuxLinux
    • 2.6.25 – < 5.10.273
    • 6.19 – < 7.2.11
    • 5.11 – < 5.15.224
    • 5.16 – < 6.1.191
    • 6.7 – < 6.12.113
    • —
    • 6.13 – < 6.18.57
    • 6.2 – < 6.6.160
    • 5.10.273
    • 7.2.11
    • 5.15.224
    • 6.1.191
    • 6.12.113
    • 7.3
    • 6.18.57
    • 6.6.160

    Vendors and products

    References & sources

    Changes to this CVE

    Who changed this CVE and when: NVD (analysis, affected products, CVSS), the CVE publisher (CNA) and additional providers such as CISA (ADP).

    1. Record modifiedLinux

      Show 4 original changes
      Individual changes of this event as published by NVD
      TypeActionBeforeAfter
      Affected versions (publisher)added
      —
      Affected value modified. <a href="https://github.com/CVEProject/cvelistV5/blob/main/cves/2026/99xxx/CVE-2026-99039.json">CVE-2026-99039</a>
      Referenceadded
      —
      https://git.kernel.org/stable/c/1c23da6f148089d59b3d3e9b2e7f1eefa927cab9
      Referenceadded
      —
      https://git.kernel.org/stable/c/a2f1aa3341f185ca52103dc4908647570b208855
      Referenceadded
      —
      https://git.kernel.org/stable/c/b90f33ad9179c69658342323382bfed158f88cb9

      Source identifier: 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    2. ReceivedLinux

      Description added or changed

      Show 7 original changes
      Individual changes of this event as published by NVD
      TypeActionBeforeAfter
      Descriptionadded
      —
      In the Linux kernel, the following vulnerability has been resolved: memstick: core: wait for request completion before freeing card In memstick_alloc_card() and memstick_set_rw_addr(), wait_for_completion_timeout() is used to wait for device identification and address configuration requests to complete. The memstick subsystem does not provide an abort or cancellation callback in struct memstick_host for in-flight requests. If wait_for_completion_timeout() expires (for instance, when a USB transfer or command retry is delayed), memstick_alloc_card() returns an error and frees the memstick_dev structure via kfree(card). However, the host controller driver (such as rtsx_usb_ms) is still running the request asynchronously in worker context. When the transfer eventually finishes, the driver writes into host->req->data, which points to memory inside the already freed card structure. This leads to a KASAN slab-use-after-free write: BUG: KASAN: slab-use-after-free in ms_read_bytes+0x8fe/0x990 Write of size 1 at addr ffff88813c188079 by task kworker/1:5/5239 Workqueue: events rtsx_usb_ms_handle_req Call Trace: ms_read_bytes+0x8fe/0x990 drivers/memstick/host/rtsx_usb_ms.c:450 rtsx_usb_ms_issue_cmd drivers/memstick/host/rtsx_usb_ms.c:477 [inline] rtsx_usb_ms_handle_req+0x557/0x1a00 drivers/memstick/host/rtsx_usb_ms.c:531 process_one_work+0xac7/0x1b10 kernel/workqueue.c:3396 worker_thread+0x5ef/0xe50 kernel/workqueue.c:3560 kthread+0x373/0x450 kernel/kthread.c:436 Allocated by task 1662: memstick_alloc_card drivers/memstick/core/memstick.c:383 [inline] memstick_check+0x2c1/0x10d0 drivers/memstick/core/memstick.c:452 process_one_work+0xac7/0x1b10 kernel/workqueue.c:3396 Freed by task 1662: kfree+0x20c/0x650 mm/slub.c:6792 memstick_alloc_card drivers/memstick/core/memstick.c:420 [inline] memstick_check+0x72b/0x10d0 drivers/memstick/core/memstick.c:452 process_one_work+0xac7/0x1b10 kernel/workqueue.c:3396 Host controller drivers (rtsx_usb_ms, jmb38x_ms, tifm_ms, r592) already implement their own hardware and bus timeouts, and callers in mspro_block and ms_block already rely on wait_for_completion() unconditionally. Replace wait_for_completion_timeout() with wait_for_completion() in memstick_set_rw_addr() and memstick_alloc_card() so that the card structure is never freed while an asynchronous request is in flight.
      Affected versions (publisher)added
      —
      New affected value received. <a href="https://github.com/CVEProject/cvelistV5/blob/main/cves/2026/99xxx/CVE-2026-99039.json">CVE-2026-99039</a>
      Referenceadded
      —
      https://git.kernel.org/stable/c/3af81770e2011c6ac7bb597a4af2e4f3591f928c
      Referenceadded
      —
      https://git.kernel.org/stable/c/810580cf60edc75c9891c2de3225e4cda78e4d9f
      Referenceadded
      —
      https://git.kernel.org/stable/c/aa0a37b5024d921e96ac4f8f487c8bfbf1f1a582
      Referenceadded
      —
      https://git.kernel.org/stable/c/c3ab92542475d59ae685cbb294e70ca4d0ba38e9
      Referenceadded
      —
      https://git.kernel.org/stable/c/f2795c50144d528dabc2cf2fd53c0f0c63a823a1

      Source identifier: 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    Embed badge

    Show the severity and KEV status of this vulnerability on your site – with a link back here. The image is updated hourly.

    Badge preview for CVE-2026-99039
    <a href="https://intel.neosec.eu/en/cve/CVE-2026-99039"><img src="https://intel.neosec.eu/badge/cve/CVE-2026-99039.svg?lang=en" alt="CVE-2026-99039 – NEOSEC Intel" height="20"></a>