Not ratedCVE-2026-98918

    Linux Kernel: security vulnerability (CVE-2026-98918)

    Published Last modified Sources: BSI, CVE.org

    What is affected, what to do

    In the Linux kernel, the following vulnerability has been resolved: mm/damon/ops-common: use a page-aligned address in damon_ptep_mkold() __damon_va_prepare_access_check() picks a random byte address within the region and stores it in r->sampling_addr. damon_va_mkold() passes it into a page table walk, which hands it to damon_ptep_mkold() as the address of the page to sample: damon_va_mkold(mm, r->sampling_addr) damon_va_walk_page_range(mm, addr, addr + 1) damon_mkold_pmd_entry() damon_ptep_mkold(pte, vma, addr) ptep_test_and_clear_young(vma, addr, pte) mmu_notifier_clear_young(mm, addr, addr + PAGE_SIZE) For arm64, before commit 6f0e1142173a ("arm64: mm: support batch clearing of the young flag for large folios"), the contpte helper walked exactly CONT_PTES entries from the aligned-down page table pointer and used @addr only to pass down to each entry, so an unaligned value was harmless: ptep = contpte_align_down(ptep); addr = ALIGN_DOWN(addr, CONT_PTE_SIZE); for (i = 0; i < CONT_PTES; i++, ptep++, addr += PAGE_SIZE) Now the range to walk is derived from @addr instead: end = addr + nr * PAGE_SIZE, rounded up to CONT_PTE_SIZE. For a sample in the last page of a contpte block, the sub-page offset puts end just past the block boundary, so the round-up lands a whole block further and the walk clears PTE_AF in CONT_PTES entries beyond the sampled block.

    Update Linux Kernel to version 7.2.9, Linux Kernel to version 7.3.

    Affected
    • Linux Kernel lt 7.0..7.2.9
    Fixed in
    • Linux Kernel 7.2.9
    • Linux Kernel 7.3

    Not sure whether and how you are affected? Ask a question about this vulnerability

    Metrics

    —

    Priority

    No value is available for this vulnerability.

    —

    CVSS v3

    No value is available for this vulnerability.

    0.2 %

    EPSS score

    Low — model estimates < 1% exploitation likelihood.

    Source: FIRST EPSS, percentile 5.5

    Show all metrics
    Severity
    Not rated
    Priority (0–325)

    The priority score is a consolidated metric that condenses several individual signals into a single, action-guiding ranking: technical severity (CVSS), exploitation likelihood (EPSS), known-exploited status (KEV) and the context of the affected asset. The aim is to answer the only truly important question in vulnerability management: what first?

    Read in glossary
    30.24 Methodology
    Exploit maturity

    An exploit is code or a technique that specifically uses a concrete vulnerability to force unintended behaviour — such as executing code or escalating privileges. It is the tool that turns a theoretical flaw into a practical attack.

    Read in glossary
    no public PoC known
    EPSS score

    The EPSS score is the absolute model output for an individual vulnerability: the estimated probability of real-world exploitation within the next 30 days, expressed as a value between 0 and 1 (i.e. 0 % to 100 %). A score of 0.42 means „the model estimates a 42 % chance of real-world exploitation within 30 days“.

    Read in glossary
    0.2 %
    Low — model estimates < 1% exploitation likelihood.
    EPSS percentile

    The EPSS percentile is the relative position of a vulnerability within all EPSS-scored CVEs, expressed as a value between 0 and 1. A percentile of 0.90 means „this CVE has a higher EPSS score than 90 % of all other scored CVEs“. Unlike the EPSS score, it is not a probability — but a positioning within a ranking.

    Read in glossary
    5.5
    Low — this CVE sits in the lower 10% of all CVEs scored today.
    KEV status

    The KEV catalogue is a list maintained by the US authority CISA of vulnerabilities for which active exploitation in the wild has been confirmed. It answers not the question „how severe?“ but „is it already being attacked?“ — thereby sharply prioritising patching.

    Read in glossary
    —
    Published

    Detection rules

    No NEOSEC detection rule is available for this vulnerability yet.

    Classification under NIS2 and CRA

    Rule-based classification from exploitation status and severity. It does not replace a case-by-case assessment.

    NIS2

    NIS2 is EU Directive (EU) 2022/2555 to raise the level of cybersecurity across the Union. It substantially broadens obligations compared with the first NIS directive: more sectors, mandatory risk management, staged reporting duties and personal accountability of senior management.

    Read in glossary
    Handle the vulnerability in regular vulnerability handling under Art. 21(2)(e) NIS2.
    CRA

    The CRA is EU Regulation (EU) 2024/2847 setting horizontal cybersecurity requirements for „products with digital elements“ — from industrial controllers and software to connected consumer devices. For the first time manufacturers must ensure security across the entire product lifecycle, handle vulnerabilities and provide security updates.

    Read in glossary
    From 11.12.2027, Annex I Part II CRA requires manufacturers of affected products with digital elements to handle vulnerabilities without delay and provide security updates.
    ISO/IEC 27001

    ISO/IEC 27001 is the internationally leading standard for an information security management system (ISMS). It describes a risk-based, process-oriented framework to systematically plan, implement, review and improve information security.

    Read in glossary
    Control A.8.8, management of technical vulnerabilities: assess relevance to your systems, plan remediation and keep evidence.

    Description

    In the Linux kernel, the following vulnerability has been resolved: mm/damon/ops-common: use a page-aligned address in damon_ptep_mkold() __damon_va_prepare_access_check() picks a random byte address within the region and stores it in r->sampling_addr. damon_va_mkold() passes it into a page table walk, which hands it to damon_ptep_mkold() as the address of the page to sample: damon_va_mkold(mm, r->sampling_addr) damon_va_walk_page_range(mm, addr, addr + 1) damon_mkold_pmd_entry() damon_ptep_mkold(pte, vma, addr) ptep_test_and_clear_young(vma, addr, pte) mmu_notifier_clear_young(mm, addr, addr + PAGE_SIZE) For arm64, before commit 6f0e1142173a ("arm64: mm: support batch clearing of the young flag for large folios"), the contpte helper walked exactly CONT_PTES entries from the aligned-down page table pointer and used @addr only to pass down to each entry, so an unaligned value was harmless: ptep = contpte_align_down(ptep); addr = ALIGN_DOWN(addr, CONT_PTE_SIZE); for (i = 0; i < CONT_PTES; i++, ptep++, addr += PAGE_SIZE) Now the range to walk is derived from @addr instead: end = addr + nr * PAGE_SIZE, rounded up to CONT_PTE_SIZE. For a sample in the last page of a contpte block, the sub-page offset puts end just past the block boundary, so the round-up lands a whole block further and the walk clears PTE_AF in CONT_PTES entries beyond the sampled block. For the last block in a page table page, those entries are past the end of that page, so the walk writes into the page that follows. Triggered by the full 7.1/7.2 kernel selftest suite on arm64 (EC2 c/m6g.4xlarge). The kernel sometimes crashes at or shortly after the DAMON test. What the overrun does depends on the page that happens to follow the page table, so there is no single signature. If that page is read-only, the write faults in the sampling path itself: Unable to handle kernel write to read-only memory at virtual address ffff0003c5d2d000 FSC = 0x0f: level 3 permission fault CM = 0, WnR = 1, TnD = 0, TagAccess = 0 CPU: 10 UID: 0 PID: 3487 Comm: kdamond.2 pc : contpte_test_and_clear_young_ptes+0x70/0xc0 lr : damon_ptep_mkold+0x1e8/0x1f8 Call trace: contpte_test_and_clear_young_ptes+0x70/0xc0 (P) damon_mkold_pmd_entry+0x150/0x170 walk_pmd_range+0x110/0x2b0 walk_pud_range+0x10c/0x208 walk_pgd_range+0x134/0x258 __walk_page_range+0x98/0x1b0 walk_page_range_vma_unsafe+0x90/0x148 walk_page_range_vma+0x28/0x40 damon_va_walk_page_range+0x114/0x2b8 damon_va_prepare_access_checks+0xec/0x1a8 kdamond_fn+0x534/0x770 kthread+0x128/0x138 ret_from_fork+0x10/0x20 Otherwise the page is writable, the PTE_AF clearing succeeds silently and the damage only surfaces later, in whatever happened to own the page, so the backtrace is unrelated to DAMON and differs between runs. Pass a page-aligned address to the ptep_test_and_clear_young() call in damon_ptep_mkold(), which is the only place DAMON can reach contpte_test_and_clear_young_ptes() from. Nothing else sees the aligned address, and r->sampling_addr itself is left as is, so the sampling and region bookkeeping semantics are unchanged.

    Source: BSI CSAF, BSI WID Portal, cvelistv5, NVD (NIST)

    Affected products

    The following versions are affected. Older releases of the same product line are also vulnerable unless stated otherwise.

    Affected products
    Affected versionsFixed in
    LinuxLinux
    • —
    • 7.0 – < 7.2.9
    • 7.3
    • 7.2.9

    Vendors and products

    References & sources

    Changes to this CVE

    Who changed this CVE and when: NVD (analysis, affected products, CVSS), the CVE publisher (CNA) and additional providers such as CISA (ADP).

    1. ReceivedLinux

      Description added or changed

      Show 4 original changes
      Individual changes of this event as published by NVD
      TypeActionBeforeAfter
      Descriptionadded
      —
      In the Linux kernel, the following vulnerability has been resolved: mm/damon/ops-common: use a page-aligned address in damon_ptep_mkold() __damon_va_prepare_access_check() picks a random byte address within the region and stores it in r->sampling_addr. damon_va_mkold() passes it into a page table walk, which hands it to damon_ptep_mkold() as the address of the page to sample: damon_va_mkold(mm, r->sampling_addr) damon_va_walk_page_range(mm, addr, addr + 1) damon_mkold_pmd_entry() damon_ptep_mkold(pte, vma, addr) ptep_test_and_clear_young(vma, addr, pte) mmu_notifier_clear_young(mm, addr, addr + PAGE_SIZE) For arm64, before commit 6f0e1142173a ("arm64: mm: support batch clearing of the young flag for large folios"), the contpte helper walked exactly CONT_PTES entries from the aligned-down page table pointer and used @addr only to pass down to each entry, so an unaligned value was harmless: ptep = contpte_align_down(ptep); addr = ALIGN_DOWN(addr, CONT_PTE_SIZE); for (i = 0; i < CONT_PTES; i++, ptep++, addr += PAGE_SIZE) Now the range to walk is derived from @addr instead: end = addr + nr * PAGE_SIZE, rounded up to CONT_PTE_SIZE. For a sample in the last page of a contpte block, the sub-page offset puts end just past the block boundary, so the round-up lands a whole block further and the walk clears PTE_AF in CONT_PTES entries beyond the sampled block. For the last block in a page table page, those entries are past the end of that page, so the walk writes into the page that follows. Triggered by the full 7.1/7.2 kernel selftest suite on arm64 (EC2 c/m6g.4xlarge). The kernel sometimes crashes at or shortly after the DAMON test. What the overrun does depends on the page that happens to follow the page table, so there is no single signature. If that page is read-only, the write faults in the sampling path itself: Unable to handle kernel write to read-only memory at virtual address ffff0003c5d2d000 FSC = 0x0f: level 3 permission fault CM = 0, WnR = 1, TnD = 0, TagAccess = 0 CPU: 10 UID: 0 PID: 3487 Comm: kdamond.2 pc : contpte_test_and_clear_young_ptes+0x70/0xc0 lr : damon_ptep_mkold+0x1e8/0x1f8 Call trace: contpte_test_and_clear_young_ptes+0x70/0xc0 (P) damon_mkold_pmd_entry+0x150/0x170 walk_pmd_range+0x110/0x2b0 walk_pud_range+0x10c/0x208 walk_pgd_range+0x134/0x258 __walk_page_range+0x98/0x1b0 walk_page_range_vma_unsafe+0x90/0x148 walk_page_range_vma+0x28/0x40 damon_va_walk_page_range+0x114/0x2b8 damon_va_prepare_access_checks+0xec/0x1a8 kdamond_fn+0x534/0x770 kthread+0x128/0x138 ret_from_fork+0x10/0x20 Otherwise the page is writable, the PTE_AF clearing succeeds silently and the damage only surfaces later, in whatever happened to own the page, so the backtrace is unrelated to DAMON and differs between runs. Pass a page-aligned address to the ptep_test_and_clear_young() call in damon_ptep_mkold(), which is the only place DAMON can reach contpte_test_and_clear_young_ptes() from. Nothing else sees the aligned address, and r->sampling_addr itself is left as is, so the sampling and region bookkeeping semantics are unchanged.
      Affected versions (publisher)added
      —
      New affected value received. <a href="https://github.com/CVEProject/cvelistV5/blob/main/cves/2026/98xxx/CVE-2026-98918.json">CVE-2026-98918</a>
      Referenceadded
      —
      https://git.kernel.org/stable/c/d5208de0799c506d3315b6f96d034c38e4509dbb
      Referenceadded
      —
      https://git.kernel.org/stable/c/f166586f74dd5d9cbadaabf86ef81c8ddf6cafa7

      Source identifier: 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    Embed badge

    Show the severity and KEV status of this vulnerability on your site – with a link back here. The image is updated hourly.

    Badge preview for CVE-2026-98918
    <a href="https://intel.neosec.eu/en/cve/CVE-2026-98918"><img src="https://intel.neosec.eu/badge/cve/CVE-2026-98918.svg?lang=en" alt="CVE-2026-98918 – NEOSEC Intel" height="20"></a>