MediumCVE-2026-98531

    Linux Kernel: Out-of-Bounds Read (CVE-2026-98531)

    Published Last modified Sources: Debian LTS, BSI, Msrc Update Guide, CVE.org

    What is affected, what to do

    In the Linux kernel, the following vulnerability has been resolved: ipv6: sr: enforce exact attribute length for SEG6_ATTR_DST In seg6_genl_policy, SEG6_ATTR_DST is defined with .type = NLA_BINARY and .len = sizeof(struct in6_addr). For NLA_BINARY, .len only enforces the maximum payload length and permits shorter payloads (e.g., 0 bytes).

    Update Linux Kernel to version 5.10.271, Linux Kernel to version 5.15.222, Linux Kernel to version 6.1.189.

    Affected
    • Linux Kernel lt 4.10..5.10.271
    • Linux Kernel lt 5.11..5.15.222
    • Linux Kernel lt 5.16..6.1.189
    • Linux Kernel lt 6.2..6.6.158
    • Linux Kernel lt 6.7..6.12.112
    • Linux Kernel lt 6.13..6.18.55
    • Linux Kernel lt 6.19..7.2.9
    Fixed in
    • Linux Kernel 5.10.271
    • Linux Kernel 5.15.222
    • Linux Kernel 6.1.189
    • Linux Kernel 6.6.158
    • Linux Kernel 6.12.112
    • Linux Kernel 6.18.55
    • Linux Kernel 7.2.9
    • Linux Kernel 7.3

    Not sure whether and how you are affected? Ask a question about this vulnerability

    Metrics

    4.4

    Priority

    XIEM Effective CVSS: highest available CVSS rating from NVD and vendor data.

    Source: Vendor (CNA), CVSS v3

    4.4

    CVSS v3

    Severity Medium on the scale from 0 to 10.

    Source: Debian LTS, BSI, Msrc Update Guide, CVE.org

    0.2 %

    EPSS score

    Low — model estimates < 1% exploitation likelihood.

    Source: FIRST EPSS, percentile 12.6

    Show all metrics
    Severity
    Medium
    Priority (0–325)

    The priority score is a consolidated metric that condenses several individual signals into a single, action-guiding ranking: technical severity (CVSS), exploitation likelihood (EPSS), known-exploited status (KEV) and the context of the affected asset. The aim is to answer the only truly important question in vulnerability management: what first?

    Read in glossary
    53.26 Methodology
    Exploit maturity

    An exploit is code or a technique that specifically uses a concrete vulnerability to force unintended behaviour — such as executing code or escalating privileges. It is the tool that turns a theoretical flaw into a practical attack.

    Read in glossary
    no public PoC known
    XIEM Effective CVSS

    XIEM® is the tiered managed-security operating model from NEOSEC and a registered trademark of NEOSEC GmbH. It extends classic SIEM — the central collection, normalisation and correlation of security-relevant events — with endpoint forensics, network visibility and deception technology, and consolidates them into three building tiers: Sentry, Orchestrate and Command.

    Read in glossary
    4.4 Methodology
    CVSS v3

    CVSS is the globally established, open standard for assessing the technical severity of a vulnerability on a scale from 0 to 10. It describes how easily a flaw can be exploited and what damage it can cause — but not how likely its actual exploitation is. CVSS and the complementary EPSS deliberately answer different questions.

    Read in glossary
    4.4
    EPSS score

    The EPSS score is the absolute model output for an individual vulnerability: the estimated probability of real-world exploitation within the next 30 days, expressed as a value between 0 and 1 (i.e. 0 % to 100 %). A score of 0.42 means „the model estimates a 42 % chance of real-world exploitation within 30 days“.

    Read in glossary
    0.2 %
    Low — model estimates < 1% exploitation likelihood.
    EPSS percentile

    The EPSS percentile is the relative position of a vulnerability within all EPSS-scored CVEs, expressed as a value between 0 and 1. A percentile of 0.90 means „this CVE has a higher EPSS score than 90 % of all other scored CVEs“. Unlike the EPSS score, it is not a probability — but a positioning within a ranking.

    Read in glossary
    12.6
    Elevated — this CVE ranks above at least 10% of all CVEs scored today.
    KEV status

    The KEV catalogue is a list maintained by the US authority CISA of vulnerabilities for which active exploitation in the wild has been confirmed. It answers not the question „how severe?“ but „is it already being attacked?“ — thereby sharply prioritising patching.

    Read in glossary
    —
    Published

    Detection rules

    No NEOSEC detection rule is available for this vulnerability yet.

    Classification under NIS2 and CRA

    Rule-based classification from exploitation status and severity. It does not replace a case-by-case assessment.

    NIS2

    NIS2 is EU Directive (EU) 2022/2555 to raise the level of cybersecurity across the Union. It substantially broadens obligations compared with the first NIS directive: more sectors, mandatory risk management, staged reporting duties and personal accountability of senior management.

    Read in glossary
    Handle the vulnerability in regular vulnerability handling under Art. 21(2)(e) NIS2.
    CRA

    The CRA is EU Regulation (EU) 2024/2847 setting horizontal cybersecurity requirements for „products with digital elements“ — from industrial controllers and software to connected consumer devices. For the first time manufacturers must ensure security across the entire product lifecycle, handle vulnerabilities and provide security updates.

    Read in glossary
    From 11.12.2027, Annex I Part II CRA requires manufacturers of affected products with digital elements to handle vulnerabilities without delay and provide security updates.
    ISO/IEC 27001

    ISO/IEC 27001 is the internationally leading standard for an information security management system (ISMS). It describes a risk-based, process-oriented framework to systematically plan, implement, review and improve information security.

    Read in glossary
    Control A.8.8, management of technical vulnerabilities: assess relevance to your systems, plan remediation and keep evidence.

    Description

    In the Linux kernel, the following vulnerability has been resolved: ipv6: sr: enforce exact attribute length for SEG6_ATTR_DST In seg6_genl_policy, SEG6_ATTR_DST is defined with .type = NLA_BINARY and .len = sizeof(struct in6_addr). For NLA_BINARY, .len only enforces the maximum payload length and permits shorter payloads (e.g., 0 bytes). When seg6_genl_set_tunsrc() copies sizeof(struct in6_addr) bytes via kmemdup(val, sizeof(*val), GFP_KERNEL), a short SEG6_ATTR_DST attribute triggers a 16-byte out-of-bounds read past skb->tail into uninitialized skb->head memory, which is stored in sdata->tun_src and leaked back to userspace via SEG6_CMD_GET_TUNSRC. Switch SEG6_ATTR_DST in seg6_genl_policy to NLA_POLICY_EXACT_LEN(sizeof(struct in6_addr)) so that generic netlink validation rejects any attribute whose length is not exactly sizeof(struct in6_addr) with -ERANGE. Tested in QEMU against Linux 7.3.0-rc3 by sending a SEG6_CMD_SET_TUNSRC Generic Netlink message with a 0-byte SEG6_ATTR_DST attribute followed by SEG6_CMD_GET_TUNSRC. On the unfixed kernel, SEG6_CMD_SET_TUNSRC succeeds (err = 0) and SEG6_CMD_GET_TUNSRC leaks 16 bytes of uninitialized kernel heap memory (tun_src = 836a61ecc4d25a1042a8d60411cfb378); with this patch applied, SEG6_CMD_SET_TUNSRC is rejected by netlink policy validation with -ERANGE (-34) and tun_src remains zeroed.

    Source: Debian LTS Advisories, BSI WID Portal, BSI CSAF, Microsoft Security Update Guide, cvelistv5, NVD (NIST)

    Affected products

    The following versions are affected. Older releases of the same product line are also vulnerable unless stated otherwise.

    Affected products
    Affected versionsFixed in
    LinuxLinux
    • 5.16 – < 6.1.189
    • 4.10 – < 5.10.271
    • 6.13 – < 6.18.55
    • 6.2 – < 6.6.158
    • —
    • 6.7 – < 6.12.112
    • 5.11 – < 5.15.222
    • 6.19 – < 7.2.9
    • 6.1.189
    • 5.10.271
    • 6.18.55
    • 6.6.158
    • 7.3
    • 6.12.112
    • 5.15.222
    • 7.2.9

    Vendors and products

    Affected operating systems

    Affected operating systems
    Linuxdebianlinux-6.12bookworm

    References & sources

    Changes to this CVE

    Who changed this CVE and when: NVD (analysis, affected products, CVSS), the CVE publisher (CNA) and additional providers such as CISA (ADP).

    1. Record modifiedLinux

      1 individual change: Affected versions (publisher)

      Show the original change
      Individual changes of this event as published by NVD
      TypeActionBeforeAfter
      Affected versions (publisher)added
      —
      Affected value modified. <a href="https://github.com/CVEProject/cvelistV5/blob/main/cves/2026/98xxx/CVE-2026-98531.json">CVE-2026-98531</a>

      Source identifier: 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    2. ReceivedLinux

      Description added or changed

      Show 10 original changes
      Individual changes of this event as published by NVD
      TypeActionBeforeAfter
      Descriptionadded
      —
      In the Linux kernel, the following vulnerability has been resolved: ipv6: sr: enforce exact attribute length for SEG6_ATTR_DST In seg6_genl_policy, SEG6_ATTR_DST is defined with .type = NLA_BINARY and .len = sizeof(struct in6_addr). For NLA_BINARY, .len only enforces the maximum payload length and permits shorter payloads (e.g., 0 bytes). When seg6_genl_set_tunsrc() copies sizeof(struct in6_addr) bytes via kmemdup(val, sizeof(*val), GFP_KERNEL), a short SEG6_ATTR_DST attribute triggers a 16-byte out-of-bounds read past skb->tail into uninitialized skb->head memory, which is stored in sdata->tun_src and leaked back to userspace via SEG6_CMD_GET_TUNSRC. Switch SEG6_ATTR_DST in seg6_genl_policy to NLA_POLICY_EXACT_LEN(sizeof(struct in6_addr)) so that generic netlink validation rejects any attribute whose length is not exactly sizeof(struct in6_addr) with -ERANGE. Tested in QEMU against Linux 7.3.0-rc3 by sending a SEG6_CMD_SET_TUNSRC Generic Netlink message with a 0-byte SEG6_ATTR_DST attribute followed by SEG6_CMD_GET_TUNSRC. On the unfixed kernel, SEG6_CMD_SET_TUNSRC succeeds (err = 0) and SEG6_CMD_GET_TUNSRC leaks 16 bytes of uninitialized kernel heap memory (tun_src = 836a61ecc4d25a1042a8d60411cfb378); with this patch applied, SEG6_CMD_SET_TUNSRC is rejected by netlink policy validation with -ERANGE (-34) and tun_src remains zeroed.
      Affected versions (publisher)added
      —
      New affected value received. <a href="https://github.com/CVEProject/cvelistV5/blob/main/cves/2026/98xxx/CVE-2026-98531.json">CVE-2026-98531</a>
      Referenceadded
      —
      https://git.kernel.org/stable/c/050a0aa3c80907b8c60a396b7e04d48d8b1a9e70
      Referenceadded
      —
      https://git.kernel.org/stable/c/195813bb7324c338eaba0aaa02b18681ee65b670
      Referenceadded
      —
      https://git.kernel.org/stable/c/209eefebee54c4a5f01d68b61e8ac9881eca2de9
      Referenceadded
      —
      https://git.kernel.org/stable/c/2d959c75c27f90e9ec489d18ce5ee6b852ad4741
      Referenceadded
      —
      https://git.kernel.org/stable/c/66bf65fa109326e4c4ddeb0b94093379f72838fd
      Referenceadded
      —
      https://git.kernel.org/stable/c/6fcfc362344edea745a69f3a705de50b731f3418
      Referenceadded
      —
      https://git.kernel.org/stable/c/94214cf0a08dd2c5f37aeeea46078d9dfe8e4a0e
      Referenceadded
      —
      https://git.kernel.org/stable/c/e3ac68c1cdc2535d127b2bfd50c263d16c8e4199

      Source identifier: 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    Embed badge

    Show the severity and KEV status of this vulnerability on your site – with a link back here. The image is updated hourly.

    Badge preview for CVE-2026-98531
    <a href="https://intel.neosec.eu/en/cve/CVE-2026-98531"><img src="https://intel.neosec.eu/badge/cve/CVE-2026-98531.svg?lang=en" alt="CVE-2026-98531 – NEOSEC Intel" height="20"></a>