MediumCVE-2026-80828

    Linux Kernel: security vulnerability (CVE-2026-80828)

    Published Last modified Sources: Ubuntu, HKCERT, Debian LTS, Debian, SUSE, EUVD, CVE.org, Msrc Update Guide, BSI

    Share

    What is affected, what to do

    In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Complete cleanup after system-resume errors A failed system resume can leave the card unusable until reboot. usb_audio_resume() jumps to err_out when snd_usb_pcm_resume() or snd_usb_mixer_resume() fails. The error path skips the out: block, which restores D0 and decrements chip->num_suspended_intf.

    Update Linux Kernel to version 5.15.220, Linux Kernel to version 6.1.187, Linux Kernel to version 6.6.156.

    Affected
    • Linux Kernel lt 2.6.39..5.15.220
    • Linux Kernel lt 5.16..6.1.187
    • Linux Kernel lt 6.2..6.6.156
    • Linux Kernel lt 6.7..6.12.108
    • Linux Kernel lt 6.13..6.18.49
    • Linux Kernel lt 6.19..7.1.13
    • Linux Kernel lt 7.2..7.2.3
    Fixed in
    • Linux Kernel 5.15.220
    • Linux Kernel 6.1.187
    • Linux Kernel 6.6.156
    • Linux Kernel 6.12.108
    • Linux Kernel 6.18.49
    • Linux Kernel 7.1.13
    • Linux Kernel 7.2.3
    • Linux Kernel 7.3

    Not sure whether and how you are affected? Ask a question about this vulnerability

    Metrics

    4.3

    XIEM Effective CVSS

    Highest available CVSS rating from NVD and vendor data.

    Source: Vendor (CNA), CVSS v3

    4.3

    CVSS v3

    Severity Medium on the scale from 0 to 10.

    Source: Ubuntu, HKCERT, Debian LTS, Debian, SUSE, EUVD, CVE.org, Msrc Update Guide, BSI

    0.2 %

    EPSS score

    Low — model estimates < 1% exploitation likelihood.

    Source: FIRST EPSS, percentile 8.7

    Show all metrics
    Severity
    Medium
    Priority (0–325)

    The priority score is a consolidated metric that condenses several individual signals into a single, action-guiding ranking: technical severity (CVSS), exploitation likelihood (EPSS), known-exploited status (KEV) and the context of the affected asset. The aim is to answer the only truly important question in vulnerability management: what first?

    Read in glossary
    45.98 Methodology
    Exploit maturity

    An exploit is code or a technique that specifically uses a concrete vulnerability to force unintended behaviour — such as executing code or escalating privileges. It is the tool that turns a theoretical flaw into a practical attack.

    Read in glossary
    no public PoC known
    XIEM Effective CVSS

    XIEM® is the tiered managed-security operating model from NEOSEC and a registered trademark of NEOSEC GmbH. It extends classic SIEM — the central collection, normalisation and correlation of security-relevant events — with endpoint forensics, network visibility and deception technology, and consolidates them into three building tiers: Sentry, Orchestrate and Command.

    Read in glossary
    4.3 Methodology
    CVSS v3

    CVSS is the globally established, open standard for assessing the technical severity of a vulnerability on a scale from 0 to 10. It describes how easily a flaw can be exploited and what damage it can cause — but not how likely its actual exploitation is. CVSS and the complementary EPSS deliberately answer different questions.

    Read in glossary
    4.3
    EPSS score

    The EPSS score is the absolute model output for an individual vulnerability: the estimated probability of real-world exploitation within the next 30 days, expressed as a value between 0 and 1 (i.e. 0 % to 100 %). A score of 0.42 means „the model estimates a 42 % chance of real-world exploitation within 30 days“.

    Read in glossary
    0.2 %
    Low — model estimates < 1% exploitation likelihood.
    EPSS percentile

    The EPSS percentile is the relative position of a vulnerability within all EPSS-scored CVEs, expressed as a value between 0 and 1. A percentile of 0.90 means „this CVE has a higher EPSS score than 90 % of all other scored CVEs“. Unlike the EPSS score, it is not a probability — but a positioning within a ranking.

    Read in glossary
    8.7
    Low — this CVE sits in the lower 10% of all CVEs scored today.
    KEV status

    The KEV catalogue is a list maintained by the US authority CISA of vulnerabilities for which active exploitation in the wild has been confirmed. It answers not the question „how severe?“ but „is it already being attacked?“ — thereby sharply prioritising patching.

    Read in glossary
    —
    Published

    Detection rules

    No NEOSEC detection rule is available for this vulnerability yet.

    Classification under NIS2 and CRA

    Rule-based classification from exploitation status and severity. It does not replace a case-by-case assessment.

    NIS2

    NIS2 is EU Directive (EU) 2022/2555 to raise the level of cybersecurity across the Union. It substantially broadens obligations compared with the first NIS directive: more sectors, mandatory risk management, staged reporting duties and personal accountability of senior management.

    Read in glossary
    Handle the vulnerability in regular vulnerability handling under Art. 21(2)(e) NIS2.
    CRA

    The CRA is EU Regulation (EU) 2024/2847 setting horizontal cybersecurity requirements for „products with digital elements“ — from industrial controllers and software to connected consumer devices. For the first time manufacturers must ensure security across the entire product lifecycle, handle vulnerabilities and provide security updates.

    Read in glossary
    From 11.12.2027, Annex I Part II CRA requires manufacturers of affected products with digital elements to handle vulnerabilities without delay and provide security updates.
    ISO/IEC 27001

    ISO/IEC 27001 is the internationally leading standard for an information security management system (ISMS). It describes a risk-based, process-oriented framework to systematically plan, implement, review and improve information security.

    Read in glossary
    Control A.8.8, management of technical vulnerabilities: assess relevance to your systems, plan remediation and keep evidence.

    Description

    In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Complete cleanup after system-resume errors A failed system resume can leave the card unusable until reboot. usb_audio_resume() jumps to err_out when snd_usb_pcm_resume() or snd_usb_mixer_resume() fails. The error path skips the out: block, which restores D0 and decrements chip->num_suspended_intf. The card stays in SNDRV_CTL_POWER_D3hot, so later control access blocks in snd_power_ref_and_wait(). USB core logs an interface resume callback error. It does not retry that callback, so a later callback cannot complete the skipped cleanup. usb_audio_suspend() increments num_suspended_intf before returning success. A system-resume callback must consume the system-suspend count even if a component resume fails. Otherwise, the stranded count skews later suspend and resume cycles. Do not apply this cleanup to runtime-resume errors. Runtime PM can retry -EAGAIN or -EBUSY without another suspend callback. The count must continue to describe that suspended interface. Other runtime-resume errors latch runtime_error in the PM core and do not cause an immediate callback retry. Both parts of the system-resume error path are longstanding. Commit 88a8516a2128a ("ALSA: usbaudio: implement USB autosuspend") introduced err_out past the D0 restore. Commit 862b2509d157c ("ALSA: usb-audio: Fix inconsistent card PM state after resume") later moved num_suspended_intf-- into the out: block. The error path now skips both operations. No third-party code is needed to reach the error path. snd_usb_mixer_resume() ends in snd_usb_mixer_activate(), which returns the result of usb_submit_urb() for devices that have a mixer status URB. Its mixer->private_resume hook can also fail through scarlett2_init_notify(). snd_usb_pcm_resume() issues a SET_CUR request to a UAC3 power domain. It can return -EPIPE or -EIO when the device stalls the request. Route a component error through out: only when system_suspend is nonzero. Continue to return runtime-resume errors through err_out. Later component resume stages remain skipped. The original error still reaches USB core. A later transfer can fail if the device did not recover. I reproduced the system-resume failure on an Audient iD14 MkI with an out-of-tree diagnostic mixer resume hook. An injected -EIO on the unpatched core left control readers in uninterruptible sleep in snd_power_ref_and_wait() until a reboot. With this patch, the same failure restored control access. A second system suspend and resume also succeeded after I disabled fault injection.

    Source: Ubuntu Security Notices, HKCERT (CC BY 3.0 HK) · HKCERT rating: medium, Debian LTS Advisories, Debian Security Advisories, suse_csaf, ENISA EUVD, NVD (NIST), CVE.org (MITRE), cvelistv5, Microsoft Security Update Guide, BSI WID Portal, BSI CSAF

    Affected products

    The following versions are affected. Older releases of the same product line are also vulnerable unless stated otherwise.

    Affected products
    Affected versionsFixed in
    LinuxLinux
    • 6.13 – < 6.18.49
    • 5.16 – < 6.1.187
    • 6.7 – < 6.12.108
    • 7.2 – < 7.2.3
    • —
    • 6.19 – < 7.1.13
    • 6.2 – < 6.6.156
    • 2.6.39 – < 5.15.220
    • 6.18.49
    • 6.1.187
    • 6.12.108
    • 7.2.3
    • 7.3
    • 7.1.13
    • 6.6.156
    • 5.15.220
    Red HatOpenShift
    • Container Platform
    • —

    Vendors and products

    Affected operating systems

    Affected operating systems
    Linuxdebianlinuxbookworm
    Linuxdebianlinuxtrixie
    Linuxubuntulinuxjammy
    Linuxubuntulinuxnoble
    Linuxubuntulinuxresolute
    Linuxdebianlinux-6.12bookworm
    Linuxubuntulinux-awsjammy
    Linuxubuntulinux-awsnoble
    Linuxubuntulinux-awsresolute
    Linuxubuntulinux-aws-5.15focal
    Linuxubuntulinux-aws-6.8jammy
    Linuxubuntulinux-aws-7.0noble
    Linuxubuntulinux-aws-fipsjammy
    Linuxubuntulinux-aws-fipsnoble
    Linuxubuntulinux-azurejammy
    Linuxubuntulinux-azurenoble
    Linuxubuntulinux-azureresolute
    Linuxubuntulinux-azure-5.15focal
    Linuxubuntulinux-azure-6.8jammy
    Linuxubuntulinux-azure-fdejammy
    Linuxubuntulinux-azure-fdenoble
    Linuxubuntulinux-azure-fderesolute
    Linuxubuntulinux-azure-fde-5.15focal
    Linuxubuntulinux-azure-fde-6.8jammy

    References & sources

    Changes to this CVE

    Who changed this CVE and when: NVD (analysis, affected products, CVSS), the CVE publisher (CNA) and additional providers such as CISA (ADP).

    1. Record modifiedLinux

      1 individual change: Affected versions (publisher)

      Show the original change
      Individual changes of this event as published by NVD
      TypeActionBeforeAfter
      Affected versions (publisher)added
      —
      Affected value modified. <a href="https://github.com/CVEProject/cvelistV5/blob/main/cves/2026/80xxx/CVE-2026-80828.json">CVE-2026-80828</a>

      Source identifier: 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    2. ReceivedLinux

      Description added or changed

      Show 10 original changes
      Individual changes of this event as published by NVD
      TypeActionBeforeAfter
      Descriptionadded
      —
      In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Complete cleanup after system-resume errors A failed system resume can leave the card unusable until reboot. usb_audio_resume() jumps to err_out when snd_usb_pcm_resume() or snd_usb_mixer_resume() fails. The error path skips the out: block, which restores D0 and decrements chip->num_suspended_intf. The card stays in SNDRV_CTL_POWER_D3hot, so later control access blocks in snd_power_ref_and_wait(). USB core logs an interface resume callback error. It does not retry that callback, so a later callback cannot complete the skipped cleanup. usb_audio_suspend() increments num_suspended_intf before returning success. A system-resume callback must consume the system-suspend count even if a component resume fails. Otherwise, the stranded count skews later suspend and resume cycles. Do not apply this cleanup to runtime-resume errors. Runtime PM can retry -EAGAIN or -EBUSY without another suspend callback. The count must continue to describe that suspended interface. Other runtime-resume errors latch runtime_error in the PM core and do not cause an immediate callback retry. Both parts of the system-resume error path are longstanding. Commit 88a8516a2128a ("ALSA: usbaudio: implement USB autosuspend") introduced err_out past the D0 restore. Commit 862b2509d157c ("ALSA: usb-audio: Fix inconsistent card PM state after resume") later moved num_suspended_intf-- into the out: block. The error path now skips both operations. No third-party code is needed to reach the error path. snd_usb_mixer_resume() ends in snd_usb_mixer_activate(), which returns the result of usb_submit_urb() for devices that have a mixer status URB. Its mixer->private_resume hook can also fail through scarlett2_init_notify(). snd_usb_pcm_resume() issues a SET_CUR request to a UAC3 power domain. It can return -EPIPE or -EIO when the device stalls the request. Route a component error through out: only when system_suspend is nonzero. Continue to return runtime-resume errors through err_out. Later component resume stages remain skipped. The original error still reaches USB core. A later transfer can fail if the device did not recover. I reproduced the system-resume failure on an Audient iD14 MkI with an out-of-tree diagnostic mixer resume hook. An injected -EIO on the unpatched core left control readers in uninterruptible sleep in snd_power_ref_and_wait() until a reboot. With this patch, the same failure restored control access. A second system suspend and resume also succeeded after I disabled fault injection.
      Affected versions (publisher)added
      —
      New affected value received. <a href="https://github.com/CVEProject/cvelistV5/blob/main/cves/2026/80xxx/CVE-2026-80828.json">CVE-2026-80828</a>
      Referenceadded
      —
      https://git.kernel.org/stable/c/1739a976312e110c93a8dee66a1cdf893a1b187e
      Referenceadded
      —
      https://git.kernel.org/stable/c/3f06f3f5b16212f180764654a9398ff5f7a855c8
      Referenceadded
      —
      https://git.kernel.org/stable/c/3fa521c3c54b42e16cad8ade76551113a783752b
      Referenceadded
      —
      https://git.kernel.org/stable/c/5a625fc2284e35f33693efd9534aebaca3b005d4
      Referenceadded
      —
      https://git.kernel.org/stable/c/6c94877b6bab9185898bcad4b082ff5592558921
      Referenceadded
      —
      https://git.kernel.org/stable/c/6d3e202670b819c414076a5d07dffac8a39274ad
      Referenceadded
      —
      https://git.kernel.org/stable/c/d1f643b1c0258bd519146f7a342bbb394d413912
      Referenceadded
      —
      https://git.kernel.org/stable/c/f1c05c41d07b874635d681ae328d13ec550470c5

      Source identifier: 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    Embed badge

    Show the severity and KEV status of this vulnerability on your site – with a link back here. The image is updated hourly.

    Badge preview for CVE-2026-80828
    <a href="https://intel.neosec.eu/en/cve/CVE-2026-80828"><img src="https://intel.neosec.eu/badge/cve/CVE-2026-80828.svg?lang=en" alt="CVE-2026-80828 – NEOSEC Intel" height="20"></a>