Not ratedCVE-2026-80795

    Linux Kernel: Out-of-Bounds Write (CVE-2026-80795)

    Published Last modified Sources: Ubuntu, HKCERT, Debian LTS, SUSE, BSI, CVE.org, EUVD, Msrc Update Guide

    Share

    What is affected, what to do

    In the Linux kernel, the following vulnerability has been resolved: nfc: nci: fix out-of-bounds write in nci_target_auto_activated() nci_target_auto_activated() appends a target to the fixed-size array ndev->targets[NCI_MAX_DISCOVERED_TARGETS] and increments ndev->n_targets without first checking the array is full; unlike its sibling nci_add_new_target(), which bails out when n_targets already equals NCI_MAX_DISCOVERED_TARGETS. ndev->n_targets is only cleared by nci_clear_target_list(), so an NFCC that repeatedly re-runs discovery (RF_DISCOVER_RSP, which re-enters NCI_DISCOVERY without clearing the target list) and reports an auto-activated target (RF_INTF_ACTIVATED_NTF) drives n_targets past the limit. The append then writes a struct nfc_target past the end of the array (a slab out-of-bounds write), and nfc_targets_found() goes on to walk the array with the inflated count: BUG: KASAN: slab-out-of-bounds in nci_add_new_protocol+0x94/0x2ac [nci] Write of size 2 at addr ffff0000c7299a18 by task kworker/u8:0/12 Workqueue: nfc0_nci_rx_wq nci_rx_work [nci] Call trace: nci_add_new_protocol+0x94/0x2ac [nci] nci_ntf_packet+0xddc/0x11a0 [nci] nci_rx_work+0x15c/0x1e0 [nci] process_one_work+0x2dc/0x500 worker_thread+0x240/0x460 kthread+0x1c0/0x1d0 ret_from_fork+0x10/0x20 The buggy address belongs to the cache kmalloc-2k of size 2048 The buggy address is located 1024 bytes to the right of allocated 1560-byte region [ffff0000c7299000, ffff0000c7299618) Guard nci_target_auto_activated() with the same check used by nci_add_new_target().

    Update Linux Kernel to version 5.10.267, Linux Kernel to version 5.15.218, Linux Kernel to version 6.1.185.

    Affected
    • Linux Kernel lt 3.4..5.10.267
    • Linux Kernel lt 5.11..5.15.218
    • Linux Kernel lt 5.16..6.1.185
    • Linux Kernel lt 6.2..6.6.154
    • Linux Kernel lt 6.7..6.12.106
    • Linux Kernel lt 6.13..6.18.47
    • Linux Kernel lt 6.19..7.1.11
    • Linux Kernel lt 7.2..7.2.1
    Fixed in
    • Linux Kernel 5.10.267
    • Linux Kernel 5.15.218
    • Linux Kernel 6.1.185
    • Linux Kernel 6.6.154
    • Linux Kernel 6.12.106
    • Linux Kernel 6.18.47
    • Linux Kernel 7.1.11
    • Linux Kernel 7.2.1
    • Linux Kernel 7.3

    Not sure whether and how you are affected? Ask a question about this vulnerability

    Metrics

    —

    XIEM Effective CVSS

    No value is available for this vulnerability.

    0.0

    CVSS v3

    Severity Not rated on the scale from 0 to 10.

    Source: Ubuntu, HKCERT, Debian LTS, SUSE, BSI, CVE.org, EUVD, Msrc Update Guide

    0.2 %

    EPSS score

    Low — model estimates < 1% exploitation likelihood.

    Source: FIRST EPSS, percentile 9.3

    Show all metrics
    Severity
    Not rated
    Priority (0–325)

    The priority score is a consolidated metric that condenses several individual signals into a single, action-guiding ranking: technical severity (CVSS), exploitation likelihood (EPSS), known-exploited status (KEV) and the context of the affected asset. The aim is to answer the only truly important question in vulnerability management: what first?

    Read in glossary
    24.76 Methodology
    Exploit maturity

    An exploit is code or a technique that specifically uses a concrete vulnerability to force unintended behaviour — such as executing code or escalating privileges. It is the tool that turns a theoretical flaw into a practical attack.

    Read in glossary
    no public PoC known
    CVSS v3

    CVSS is the globally established, open standard for assessing the technical severity of a vulnerability on a scale from 0 to 10. It describes how easily a flaw can be exploited and what damage it can cause — but not how likely its actual exploitation is. CVSS and the complementary EPSS deliberately answer different questions.

    Read in glossary
    0.0
    EPSS score

    The EPSS score is the absolute model output for an individual vulnerability: the estimated probability of real-world exploitation within the next 30 days, expressed as a value between 0 and 1 (i.e. 0 % to 100 %). A score of 0.42 means „the model estimates a 42 % chance of real-world exploitation within 30 days“.

    Read in glossary
    0.2 %
    Low — model estimates < 1% exploitation likelihood.
    EPSS percentile

    The EPSS percentile is the relative position of a vulnerability within all EPSS-scored CVEs, expressed as a value between 0 and 1. A percentile of 0.90 means „this CVE has a higher EPSS score than 90 % of all other scored CVEs“. Unlike the EPSS score, it is not a probability — but a positioning within a ranking.

    Read in glossary
    9.3
    Low — this CVE sits in the lower 10% of all CVEs scored today.
    KEV status

    The KEV catalogue is a list maintained by the US authority CISA of vulnerabilities for which active exploitation in the wild has been confirmed. It answers not the question „how severe?“ but „is it already being attacked?“ — thereby sharply prioritising patching.

    Read in glossary
    —
    Published

    Detection rules

    No NEOSEC detection rule is available for this vulnerability yet.

    Classification under NIS2 and CRA

    Rule-based classification from exploitation status and severity. It does not replace a case-by-case assessment.

    NIS2

    NIS2 is EU Directive (EU) 2022/2555 to raise the level of cybersecurity across the Union. It substantially broadens obligations compared with the first NIS directive: more sectors, mandatory risk management, staged reporting duties and personal accountability of senior management.

    Read in glossary
    Handle the vulnerability in regular vulnerability handling under Art. 21(2)(e) NIS2.
    CRA

    The CRA is EU Regulation (EU) 2024/2847 setting horizontal cybersecurity requirements for „products with digital elements“ — from industrial controllers and software to connected consumer devices. For the first time manufacturers must ensure security across the entire product lifecycle, handle vulnerabilities and provide security updates.

    Read in glossary
    From 11.12.2027, Annex I Part II CRA requires manufacturers of affected products with digital elements to handle vulnerabilities without delay and provide security updates.
    ISO/IEC 27001

    ISO/IEC 27001 is the internationally leading standard for an information security management system (ISMS). It describes a risk-based, process-oriented framework to systematically plan, implement, review and improve information security.

    Read in glossary
    Control A.8.8, management of technical vulnerabilities: assess relevance to your systems, plan remediation and keep evidence.

    Description

    In the Linux kernel, the following vulnerability has been resolved: nfc: nci: fix out-of-bounds write in nci_target_auto_activated() nci_target_auto_activated() appends a target to the fixed-size array ndev->targets[NCI_MAX_DISCOVERED_TARGETS] and increments ndev->n_targets without first checking the array is full; unlike its sibling nci_add_new_target(), which bails out when n_targets already equals NCI_MAX_DISCOVERED_TARGETS. ndev->n_targets is only cleared by nci_clear_target_list(), so an NFCC that repeatedly re-runs discovery (RF_DISCOVER_RSP, which re-enters NCI_DISCOVERY without clearing the target list) and reports an auto-activated target (RF_INTF_ACTIVATED_NTF) drives n_targets past the limit. The append then writes a struct nfc_target past the end of the array (a slab out-of-bounds write), and nfc_targets_found() goes on to walk the array with the inflated count: BUG: KASAN: slab-out-of-bounds in nci_add_new_protocol+0x94/0x2ac [nci] Write of size 2 at addr ffff0000c7299a18 by task kworker/u8:0/12 Workqueue: nfc0_nci_rx_wq nci_rx_work [nci] Call trace: nci_add_new_protocol+0x94/0x2ac [nci] nci_ntf_packet+0xddc/0x11a0 [nci] nci_rx_work+0x15c/0x1e0 [nci] process_one_work+0x2dc/0x500 worker_thread+0x240/0x460 kthread+0x1c0/0x1d0 ret_from_fork+0x10/0x20 The buggy address belongs to the cache kmalloc-2k of size 2048 The buggy address is located 1024 bytes to the right of allocated 1560-byte region [ffff0000c7299000, ffff0000c7299618) Guard nci_target_auto_activated() with the same check used by nci_add_new_target().

    Source: Ubuntu Security Notices, HKCERT (CC BY 3.0 HK) · HKCERT rating: medium, Debian LTS Advisories, suse_csaf, BSI WID Portal, BSI CSAF, NVD (NIST), CVE.org (MITRE), ENISA EUVD, cvelistv5, Microsoft Security Update Guide

    Affected products

    The following versions are affected. Older releases of the same product line are also vulnerable unless stated otherwise.

    Affected products
    Affected versionsFixed in
    LinuxLinux
    • 3.4 – < 5.10.267
    • 7.2 – < 7.2.1
    • 5.11 – < 5.15.218
    • 6.2 – < 6.6.154
    • 6.7 – < 6.12.106
    • —
    • 6.13 – < 6.18.47
    • 6.19 – < 7.1.11
    • 5.16 – < 6.1.185
    • 5.10.267
    • 7.2.1
    • 5.15.218
    • 6.6.154
    • 6.12.106
    • 7.3
    • 6.18.47
    • 7.1.11
    • 6.1.185
    Red HatOpenShift
    • Container Platform
    • —

    Vendors and products

    Affected operating systems

    Affected operating systems
    Linuxdebianlinuxbookworm
    Linuxubuntulinuxjammy
    Linuxubuntulinuxnoble
    Linuxubuntulinuxresolute
    Linuxdebianlinux-6.12bookworm
    Linuxubuntulinux-awsjammy
    Linuxubuntulinux-awsnoble
    Linuxubuntulinux-awsresolute
    Linuxubuntulinux-aws-5.15focal
    Linuxubuntulinux-aws-6.8jammy
    Linuxubuntulinux-aws-7.0noble
    Linuxubuntulinux-aws-fipsjammy
    Linuxubuntulinux-aws-fipsnoble
    Linuxubuntulinux-azurejammy
    Linuxubuntulinux-azurenoble
    Linuxubuntulinux-azureresolute
    Linuxubuntulinux-azure-5.15focal
    Linuxubuntulinux-azure-6.8jammy
    Linuxubuntulinux-azure-fdejammy
    Linuxubuntulinux-azure-fdenoble
    Linuxubuntulinux-azure-fderesolute
    Linuxubuntulinux-azure-fde-5.15focal
    Linuxubuntulinux-azure-fde-6.8jammy
    Linuxubuntulinux-azure-fde-7.0noble

    References & sources

    Changes to this CVE

    Who changed this CVE and when: NVD (analysis, affected products, CVSS), the CVE publisher (CNA) and additional providers such as CISA (ADP).

    1. Record modifiedLinux

      1 individual change: Affected versions (publisher)

      Show the original change
      Individual changes of this event as published by NVD
      TypeActionBeforeAfter
      Affected versions (publisher)added
      —
      Affected value modified. <a href="https://github.com/CVEProject/cvelistV5/blob/main/cves/2026/80xxx/CVE-2026-80795.json">CVE-2026-80795</a>

      Source identifier: 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    2. ReceivedLinux

      Description added or changed

      Show 11 original changes
      Individual changes of this event as published by NVD
      TypeActionBeforeAfter
      Descriptionadded
      —
      In the Linux kernel, the following vulnerability has been resolved: nfc: nci: fix out-of-bounds write in nci_target_auto_activated() nci_target_auto_activated() appends a target to the fixed-size array ndev->targets[NCI_MAX_DISCOVERED_TARGETS] and increments ndev->n_targets without first checking the array is full; unlike its sibling nci_add_new_target(), which bails out when n_targets already equals NCI_MAX_DISCOVERED_TARGETS. ndev->n_targets is only cleared by nci_clear_target_list(), so an NFCC that repeatedly re-runs discovery (RF_DISCOVER_RSP, which re-enters NCI_DISCOVERY without clearing the target list) and reports an auto-activated target (RF_INTF_ACTIVATED_NTF) drives n_targets past the limit. The append then writes a struct nfc_target past the end of the array (a slab out-of-bounds write), and nfc_targets_found() goes on to walk the array with the inflated count: BUG: KASAN: slab-out-of-bounds in nci_add_new_protocol+0x94/0x2ac [nci] Write of size 2 at addr ffff0000c7299a18 by task kworker/u8:0/12 Workqueue: nfc0_nci_rx_wq nci_rx_work [nci] Call trace: nci_add_new_protocol+0x94/0x2ac [nci] nci_ntf_packet+0xddc/0x11a0 [nci] nci_rx_work+0x15c/0x1e0 [nci] process_one_work+0x2dc/0x500 worker_thread+0x240/0x460 kthread+0x1c0/0x1d0 ret_from_fork+0x10/0x20 The buggy address belongs to the cache kmalloc-2k of size 2048 The buggy address is located 1024 bytes to the right of allocated 1560-byte region [ffff0000c7299000, ffff0000c7299618) Guard nci_target_auto_activated() with the same check used by nci_add_new_target().
      Affected versions (publisher)added
      —
      New affected value received. <a href="https://github.com/CVEProject/cvelistV5/blob/main/cves/2026/80xxx/CVE-2026-80795.json">CVE-2026-80795</a>
      Referenceadded
      —
      https://git.kernel.org/stable/c/0dc59de0075f88404a0f4a2b5233104ef459fbb2
      Referenceadded
      —
      https://git.kernel.org/stable/c/129032c0616d83a5e3e304f6ebf88f14ba01e5f7
      Referenceadded
      —
      https://git.kernel.org/stable/c/24761d3a5f692df5f7d848caeabcb2afd10917aa
      Referenceadded
      —
      https://git.kernel.org/stable/c/2f08dbce3b37624ec6b424d759336a99586170ec
      Referenceadded
      —
      https://git.kernel.org/stable/c/50e87e1c0e18d791dcd7dccf30f9a2f3e2cf3951
      Referenceadded
      —
      https://git.kernel.org/stable/c/94530ffabfca57e9bff1d207106010014cc84032
      Referenceadded
      —
      https://git.kernel.org/stable/c/ac200079db50af81e6b04d058b33ec92901d8edd
      Referenceadded
      —
      https://git.kernel.org/stable/c/afd8605fb43becb892311102844955c3b127fc7e
      Referenceadded
      —
      https://git.kernel.org/stable/c/d7083f41c21b30582e91b2e6de4d54dce74f6f9c

      Source identifier: 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    Embed badge

    Show the severity and KEV status of this vulnerability on your site – with a link back here. The image is updated hourly.

    Badge preview for CVE-2026-80795
    <a href="https://intel.neosec.eu/en/cve/CVE-2026-80795"><img src="https://intel.neosec.eu/badge/cve/CVE-2026-80795.svg?lang=en" alt="CVE-2026-80795 – NEOSEC Intel" height="20"></a>