HighCVE-2026-80789

    Linux Kernel: security vulnerability (CVE-2026-80789)

    Published Last modified Sources: SUSE, Ubuntu, HKCERT, Debian LTS, CVE.org, EUVD, Msrc Update Guide, BSI

    Share

    What is affected, what to do

    In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: bound SGL data length before allocating command buffers nvmet_tcp_map_data() reads the host-controlled 32-bit sgl->length and, for the in-capsule offset descriptor (type 0x01), checks it against port->inline_data_size before use. Any other SGL descriptor type -- including the non-inline transport SGL data-block descriptor (type (NVME_TRANSPORT_SGL_DATA_DESC << 4) | NVME_SGL_FMT_TRANSPORT_A, the type a real host uses for out-of-capsule writes) skips that check entirely and falls straight through to: cmd->req.sg = sgl_alloc(len, GFP_KERNEL, &cmd->req.sg_cnt); with len taken directly from the wire, unbounded up to 4 GiB. nvmet_req_init() only parses the command and never inspects sgl->length, and nvmet_check_transfer_len() -- the only other place transfer_len is validated -- runs later, from req->execute(), after the allocation has already happened.

    Update Linux Kernel to version 5.10.269, Linux Kernel to version 5.15.220, Linux Kernel to version 6.1.187.

    Affected
    • Linux Kernel lt 5.0..5.10.269
    • Linux Kernel lt 5.11..5.15.220
    • Linux Kernel lt 5.16..6.1.187
    • Linux Kernel lt 6.2..6.6.156
    • Linux Kernel lt 6.7..6.12.106
    • Linux Kernel lt 6.13..6.18.47
    • Linux Kernel lt 6.19..7.1.11
    • Linux Kernel lt 7.2..7.2.1
    Fixed in
    • Linux Kernel 5.10.269
    • Linux Kernel 5.15.220
    • Linux Kernel 6.1.187
    • Linux Kernel 6.6.156
    • Linux Kernel 6.12.106
    • Linux Kernel 6.18.47
    • Linux Kernel 7.1.11
    • Linux Kernel 7.2.1
    • Linux Kernel 7.3

    Not sure whether and how you are affected? Ask a question about this vulnerability

    Metrics

    7.5

    XIEM Effective CVSS

    Highest available CVSS rating from NVD and vendor data.

    Source: Vendor (CNA), CVSS v3

    7.5

    CVSS v3

    Severity High on the scale from 0 to 10.

    Source: SUSE, Ubuntu, HKCERT, Debian LTS, CVE.org, EUVD, Msrc Update Guide, BSI

    0.2 %

    EPSS score

    Low — model estimates < 1% exploitation likelihood.

    Source: FIRST EPSS, percentile 14.4

    Show all metrics
    Severity
    High
    Priority (0–325)

    The priority score is a consolidated metric that condenses several individual signals into a single, action-guiding ranking: technical severity (CVSS), exploitation likelihood (EPSS), known-exploited status (KEV) and the context of the affected asset. The aim is to answer the only truly important question in vulnerability management: what first?

    Read in glossary
    63.23 Methodology
    Exploit maturity

    An exploit is code or a technique that specifically uses a concrete vulnerability to force unintended behaviour — such as executing code or escalating privileges. It is the tool that turns a theoretical flaw into a practical attack.

    Read in glossary
    no public PoC known
    XIEM Effective CVSS

    XIEM® is the tiered managed-security operating model from NEOSEC and a registered trademark of NEOSEC GmbH. It extends classic SIEM — the central collection, normalisation and correlation of security-relevant events — with endpoint forensics, network visibility and deception technology, and consolidates them into three building tiers: Sentry, Orchestrate and Command.

    Read in glossary
    7.5 Methodology
    CVSS v3

    CVSS is the globally established, open standard for assessing the technical severity of a vulnerability on a scale from 0 to 10. It describes how easily a flaw can be exploited and what damage it can cause — but not how likely its actual exploitation is. CVSS and the complementary EPSS deliberately answer different questions.

    Read in glossary
    7.5
    EPSS score

    The EPSS score is the absolute model output for an individual vulnerability: the estimated probability of real-world exploitation within the next 30 days, expressed as a value between 0 and 1 (i.e. 0 % to 100 %). A score of 0.42 means „the model estimates a 42 % chance of real-world exploitation within 30 days“.

    Read in glossary
    0.2 %
    Low — model estimates < 1% exploitation likelihood.
    EPSS percentile

    The EPSS percentile is the relative position of a vulnerability within all EPSS-scored CVEs, expressed as a value between 0 and 1. A percentile of 0.90 means „this CVE has a higher EPSS score than 90 % of all other scored CVEs“. Unlike the EPSS score, it is not a probability — but a positioning within a ranking.

    Read in glossary
    14.4
    Elevated — this CVE ranks above at least 10% of all CVEs scored today.
    KEV status

    The KEV catalogue is a list maintained by the US authority CISA of vulnerabilities for which active exploitation in the wild has been confirmed. It answers not the question „how severe?“ but „is it already being attacked?“ — thereby sharply prioritising patching.

    Read in glossary
    —
    Published

    Detection rules

    No NEOSEC detection rule is available for this vulnerability yet.

    Classification under NIS2 and CRA

    Rule-based classification from exploitation status and severity. It does not replace a case-by-case assessment.

    NIS2

    NIS2 is EU Directive (EU) 2022/2555 to raise the level of cybersecurity across the Union. It substantially broadens obligations compared with the first NIS directive: more sectors, mandatory risk management, staged reporting duties and personal accountability of senior management.

    Read in glossary
    High technical severity: assess and remediate the vulnerability in vulnerability handling under Art. 21(2)(e) NIS2 and document the decision.
    CRA

    The CRA is EU Regulation (EU) 2024/2847 setting horizontal cybersecurity requirements for „products with digital elements“ — from industrial controllers and software to connected consumer devices. For the first time manufacturers must ensure security across the entire product lifecycle, handle vulnerabilities and provide security updates.

    Read in glossary
    From 11.12.2027, Annex I Part II CRA requires manufacturers of affected products with digital elements to handle vulnerabilities without delay and provide security updates.
    ISO/IEC 27001

    ISO/IEC 27001 is the internationally leading standard for an information security management system (ISMS). It describes a risk-based, process-oriented framework to systematically plan, implement, review and improve information security.

    Read in glossary
    Control A.8.8, management of technical vulnerabilities: assess relevance to your systems, plan remediation and keep evidence.

    Description

    In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: bound SGL data length before allocating command buffers nvmet_tcp_map_data() reads the host-controlled 32-bit sgl->length and, for the in-capsule offset descriptor (type 0x01), checks it against port->inline_data_size before use. Any other SGL descriptor type -- including the non-inline transport SGL data-block descriptor (type (NVME_TRANSPORT_SGL_DATA_DESC << 4) | NVME_SGL_FMT_TRANSPORT_A, the type a real host uses for out-of-capsule writes) skips that check entirely and falls straight through to: cmd->req.sg = sgl_alloc(len, GFP_KERNEL, &cmd->req.sg_cnt); with len taken directly from the wire, unbounded up to 4 GiB. nvmet_req_init() only parses the command and never inspects sgl->length, and nvmet_check_transfer_len() -- the only other place transfer_len is validated -- runs later, from req->execute(), after the allocation has already happened. For a write command the target responds with an R2T and parks the command waiting for the host to send the data; if the host (or an unauthenticated peer that simply never follows up) never does, the sgl_alloc() buffer stays resident for the life of the command. NVMe/TCP has no mandatory authentication in the default configuration, so any peer able to reach the target portal and complete a Fabrics connect can drive this with a single crafted command, repeatable across queues and connections for amplification. This is unbounded kernel memory allocation triggered by a remote, effectively unauthenticated peer. Validate len against the same NVMET_TCP_MAXH2CDATA ceiling this file already uses to bound per-PDU H2C data, for every SGL descriptor type, before doing any allocation. This closes the gap for the non-inline descriptor while leaving the existing, tighter inline_data_size check in place for the in-capsule case. Runtime-verified on a v6.19 KASAN stand: with this bound in place, a crafted write command carrying an oversized non-inline SGL length is rejected before sgl_alloc() runs, where the same request previously drove an unbounded ~256 MiB kernel allocation (up to 4 GiB) that stayed resident pending an R2T the host never satisfies.

    Source: suse_csaf, Ubuntu Security Notices, HKCERT (CC BY 3.0 HK) · HKCERT rating: medium, Debian LTS Advisories, NVD (NIST), CVE.org (MITRE), ENISA EUVD, cvelistv5, Microsoft Security Update Guide, BSI WID Portal, BSI CSAF

    Affected products

    The following versions are affected. Older releases of the same product line are also vulnerable unless stated otherwise.

    Affected products
    Affected versionsFixed in
    LinuxLinux
    • 5.0 – < 5.10.269
    • 5.11 – < 5.15.220
    • 7.2 – < 7.2.1
    • 5.16 – < 6.1.187
    • 6.7 – < 6.12.106
    • —
    • 6.13 – < 6.18.47
    • 6.19 – < 7.1.11
    • 6.2 – < 6.6.156
    • 5.10.269
    • 5.15.220
    • 7.2.1
    • 6.1.187
    • 6.12.106
    • 7.3
    • 6.18.47
    • 7.1.11
    • 6.6.156
    Red HatOpenShift
    • Container Platform
    • —

    Vendors and products

    Affected operating systems

    Affected operating systems
    Linuxdebianlinuxbookworm
    Linuxubuntulinuxjammy
    Linuxubuntulinuxnoble
    Linuxubuntulinuxresolute
    Linuxdebianlinux-6.12bookworm
    Linuxubuntulinux-awsjammy
    Linuxubuntulinux-awsnoble
    Linuxubuntulinux-awsresolute
    Linuxubuntulinux-aws-5.15focal
    Linuxubuntulinux-aws-6.8jammy
    Linuxubuntulinux-aws-7.0noble
    Linuxubuntulinux-aws-fipsjammy
    Linuxubuntulinux-aws-fipsnoble
    Linuxubuntulinux-azurejammy
    Linuxubuntulinux-azurenoble
    Linuxubuntulinux-azureresolute
    Linuxubuntulinux-azure-5.15focal
    Linuxubuntulinux-azure-6.8jammy
    Linuxubuntulinux-azure-fdejammy
    Linuxubuntulinux-azure-fdenoble
    Linuxubuntulinux-azure-fderesolute
    Linuxubuntulinux-azure-fde-5.15focal
    Linuxubuntulinux-azure-fde-6.8jammy
    Linuxubuntulinux-azure-fde-7.0noble

    References & sources

    Changes to this CVE

    Who changed this CVE and when: NVD (analysis, affected products, CVSS), the CVE publisher (CNA) and additional providers such as CISA (ADP).

    1. Record modifiedLinux

      1 individual change: Affected versions (publisher)

      Show the original change
      Individual changes of this event as published by NVD
      TypeActionBeforeAfter
      Affected versions (publisher)added
      —
      Affected value modified. <a href="https://github.com/CVEProject/cvelistV5/blob/main/cves/2026/80xxx/CVE-2026-80789.json">CVE-2026-80789</a>

      Source identifier: 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    2. ReceivedLinux

      Description added or changed

      Show 11 original changes
      Individual changes of this event as published by NVD
      TypeActionBeforeAfter
      Descriptionadded
      —
      In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: bound SGL data length before allocating command buffers nvmet_tcp_map_data() reads the host-controlled 32-bit sgl->length and, for the in-capsule offset descriptor (type 0x01), checks it against port->inline_data_size before use. Any other SGL descriptor type -- including the non-inline transport SGL data-block descriptor (type (NVME_TRANSPORT_SGL_DATA_DESC << 4) | NVME_SGL_FMT_TRANSPORT_A, the type a real host uses for out-of-capsule writes) skips that check entirely and falls straight through to: cmd->req.sg = sgl_alloc(len, GFP_KERNEL, &cmd->req.sg_cnt); with len taken directly from the wire, unbounded up to 4 GiB. nvmet_req_init() only parses the command and never inspects sgl->length, and nvmet_check_transfer_len() -- the only other place transfer_len is validated -- runs later, from req->execute(), after the allocation has already happened. For a write command the target responds with an R2T and parks the command waiting for the host to send the data; if the host (or an unauthenticated peer that simply never follows up) never does, the sgl_alloc() buffer stays resident for the life of the command. NVMe/TCP has no mandatory authentication in the default configuration, so any peer able to reach the target portal and complete a Fabrics connect can drive this with a single crafted command, repeatable across queues and connections for amplification. This is unbounded kernel memory allocation triggered by a remote, effectively unauthenticated peer. Validate len against the same NVMET_TCP_MAXH2CDATA ceiling this file already uses to bound per-PDU H2C data, for every SGL descriptor type, before doing any allocation. This closes the gap for the non-inline descriptor while leaving the existing, tighter inline_data_size check in place for the in-capsule case. Runtime-verified on a v6.19 KASAN stand: with this bound in place, a crafted write command carrying an oversized non-inline SGL length is rejected before sgl_alloc() runs, where the same request previously drove an unbounded ~256 MiB kernel allocation (up to 4 GiB) that stayed resident pending an R2T the host never satisfies.
      Affected versions (publisher)added
      —
      New affected value received. <a href="https://github.com/CVEProject/cvelistV5/blob/main/cves/2026/80xxx/CVE-2026-80789.json">CVE-2026-80789</a>
      Referenceadded
      —
      https://git.kernel.org/stable/c/0952541b153e258b99d39cdb03ea6919fdeb41d0
      Referenceadded
      —
      https://git.kernel.org/stable/c/14dbe37681a6a7e346fc147bb363ec7cca3180a0
      Referenceadded
      —
      https://git.kernel.org/stable/c/25ad03d5c0e858c4b63f1e4b6d461d2af1b30b22
      Referenceadded
      —
      https://git.kernel.org/stable/c/4a3f00262a044e8e15064b1a6860968bf0500bf4
      Referenceadded
      —
      https://git.kernel.org/stable/c/6d27199ebe8cb223022150f74be13f154a964474
      Referenceadded
      —
      https://git.kernel.org/stable/c/d2acc96c528d589f5827cfb90e8e9229dd9d8cb4
      Referenceadded
      —
      https://git.kernel.org/stable/c/d895e66628f939edbb98608f6e033d3d39e6e546
      Referenceadded
      —
      https://git.kernel.org/stable/c/f63e89a0310264264923f84406dea05fe752de62
      Referenceadded
      —
      https://git.kernel.org/stable/c/f6e51b09cbaa5f6f6e6a3a9dafa666f76c37aab5

      Source identifier: 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    Embed badge

    Show the severity and KEV status of this vulnerability on your site – with a link back here. The image is updated hourly.

    Badge preview for CVE-2026-80789
    <a href="https://intel.neosec.eu/en/cve/CVE-2026-80789"><img src="https://intel.neosec.eu/badge/cve/CVE-2026-80789.svg?lang=en" alt="CVE-2026-80789 – NEOSEC Intel" height="20"></a>