MediumCVE-2026-80766

    Linux Kernel: Use-After-Free (CVE-2026-80766)

    Published Last modified Sources: Ubuntu, HKCERT, Debian LTS, Debian, BSI, CVE.org, EUVD, Msrc Update Guide

    Share

    What is affected, what to do

    In the Linux kernel, the following vulnerability has been resolved: HID: uclogic: fix use-after-free of inrange_timer on remove uclogic_remove() cancels the pen in-range timer and then stops the device: timer_delete_sync(&drvdata->inrange_timer); hid_hw_stop(hdev); timer_delete_sync() only guarantees the timer is idle at that instant. uclogic_raw_event_pen() keeps delivering pen reports until hid_hw_stop() stops the transport several lines later, and every report with pen->inrange == UCLOGIC_PARAMS_PEN_INRANGE_NONE re-arms the timer: mod_timer(&drvdata->inrange_timer, jiffies + msecs_to_jiffies(100)); A report landing between the timer_delete_sync() call and the transport teardown in hid_hw_stop() re-arms inrange_timer after it was cancelled. uclogic_remove() then returns and the devm drvdata is freed, while hid_hw_stop() has already freed the input device drvdata->pen_input points at, so when the timer fires ~100 ms later uclogic_inrange_timeout() dereferences freed memory -- a use-after-free in timer-softirq context. Swapping the two calls is not a fix: stopping the device first frees drvdata->pen_input via hidinput_disconnect() while the timer may still be pending, so a timer already armed before removal fires on the freed input device in the window before timer_delete_sync() runs.

    Update Linux Kernel to version 5.15.220, Linux Kernel to version 6.1.187, Linux Kernel to version 6.6.156.

    Affected
    • Linux Kernel lt 5.1..5.15.220
    • Linux Kernel lt 5.16..6.1.187
    • Linux Kernel lt 6.2..6.6.156
    • Linux Kernel lt 6.7..6.12.108
    • Linux Kernel lt 6.13..6.18.47
    • Linux Kernel lt 6.19..7.1.11
    • Linux Kernel lt 7.2..7.2.1
    Fixed in
    • Linux Kernel 5.15.220
    • Linux Kernel 6.1.187
    • Linux Kernel 6.6.156
    • Linux Kernel 6.12.108
    • Linux Kernel 6.18.47
    • Linux Kernel 7.1.11
    • Linux Kernel 7.2.1
    • Linux Kernel 7.3

    Not sure whether and how you are affected? Ask a question about this vulnerability

    Metrics

    4.0

    XIEM Effective CVSS

    Highest available CVSS rating from NVD and vendor data.

    Source: Vendor (CNA), CVSS v3

    4.0

    CVSS v3

    Severity Medium on the scale from 0 to 10.

    Source: Ubuntu, HKCERT, Debian LTS, Debian, BSI, CVE.org, EUVD, Msrc Update Guide

    0.2 %

    EPSS score

    Low — model estimates < 1% exploitation likelihood.

    Source: FIRST EPSS, percentile 7.3

    Show all metrics
    Severity
    Medium
    Priority (0–325)

    The priority score is a consolidated metric that condenses several individual signals into a single, action-guiding ranking: technical severity (CVSS), exploitation likelihood (EPSS), known-exploited status (KEV) and the context of the affected asset. The aim is to answer the only truly important question in vulnerability management: what first?

    Read in glossary
    44.49 Methodology
    Exploit maturity

    An exploit is code or a technique that specifically uses a concrete vulnerability to force unintended behaviour — such as executing code or escalating privileges. It is the tool that turns a theoretical flaw into a practical attack.

    Read in glossary
    no public PoC known
    XIEM Effective CVSS

    XIEM® is the tiered managed-security operating model from NEOSEC and a registered trademark of NEOSEC GmbH. It extends classic SIEM — the central collection, normalisation and correlation of security-relevant events — with endpoint forensics, network visibility and deception technology, and consolidates them into three building tiers: Sentry, Orchestrate and Command.

    Read in glossary
    4.0 Methodology
    CVSS v3

    CVSS is the globally established, open standard for assessing the technical severity of a vulnerability on a scale from 0 to 10. It describes how easily a flaw can be exploited and what damage it can cause — but not how likely its actual exploitation is. CVSS and the complementary EPSS deliberately answer different questions.

    Read in glossary
    4.0
    EPSS score

    The EPSS score is the absolute model output for an individual vulnerability: the estimated probability of real-world exploitation within the next 30 days, expressed as a value between 0 and 1 (i.e. 0 % to 100 %). A score of 0.42 means „the model estimates a 42 % chance of real-world exploitation within 30 days“.

    Read in glossary
    0.2 %
    Low — model estimates < 1% exploitation likelihood.
    EPSS percentile

    The EPSS percentile is the relative position of a vulnerability within all EPSS-scored CVEs, expressed as a value between 0 and 1. A percentile of 0.90 means „this CVE has a higher EPSS score than 90 % of all other scored CVEs“. Unlike the EPSS score, it is not a probability — but a positioning within a ranking.

    Read in glossary
    7.3
    Low — this CVE sits in the lower 10% of all CVEs scored today.
    KEV status

    The KEV catalogue is a list maintained by the US authority CISA of vulnerabilities for which active exploitation in the wild has been confirmed. It answers not the question „how severe?“ but „is it already being attacked?“ — thereby sharply prioritising patching.

    Read in glossary
    —
    Published

    Detection rules

    No NEOSEC detection rule is available for this vulnerability yet.

    Classification under NIS2 and CRA

    Rule-based classification from exploitation status and severity. It does not replace a case-by-case assessment.

    NIS2

    NIS2 is EU Directive (EU) 2022/2555 to raise the level of cybersecurity across the Union. It substantially broadens obligations compared with the first NIS directive: more sectors, mandatory risk management, staged reporting duties and personal accountability of senior management.

    Read in glossary
    Handle the vulnerability in regular vulnerability handling under Art. 21(2)(e) NIS2.
    CRA

    The CRA is EU Regulation (EU) 2024/2847 setting horizontal cybersecurity requirements for „products with digital elements“ — from industrial controllers and software to connected consumer devices. For the first time manufacturers must ensure security across the entire product lifecycle, handle vulnerabilities and provide security updates.

    Read in glossary
    From 11.12.2027, Annex I Part II CRA requires manufacturers of affected products with digital elements to handle vulnerabilities without delay and provide security updates.
    ISO/IEC 27001

    ISO/IEC 27001 is the internationally leading standard for an information security management system (ISMS). It describes a risk-based, process-oriented framework to systematically plan, implement, review and improve information security.

    Read in glossary
    Control A.8.8, management of technical vulnerabilities: assess relevance to your systems, plan remediation and keep evidence.

    Description

    In the Linux kernel, the following vulnerability has been resolved: HID: uclogic: fix use-after-free of inrange_timer on remove uclogic_remove() cancels the pen in-range timer and then stops the device: timer_delete_sync(&drvdata->inrange_timer); hid_hw_stop(hdev); timer_delete_sync() only guarantees the timer is idle at that instant. uclogic_raw_event_pen() keeps delivering pen reports until hid_hw_stop() stops the transport several lines later, and every report with pen->inrange == UCLOGIC_PARAMS_PEN_INRANGE_NONE re-arms the timer: mod_timer(&drvdata->inrange_timer, jiffies + msecs_to_jiffies(100)); A report landing between the timer_delete_sync() call and the transport teardown in hid_hw_stop() re-arms inrange_timer after it was cancelled. uclogic_remove() then returns and the devm drvdata is freed, while hid_hw_stop() has already freed the input device drvdata->pen_input points at, so when the timer fires ~100 ms later uclogic_inrange_timeout() dereferences freed memory -- a use-after-free in timer-softirq context. Swapping the two calls is not a fix: stopping the device first frees drvdata->pen_input via hidinput_disconnect() while the timer may still be pending, so a timer already armed before removal fires on the freed input device in the window before timer_delete_sync() runs. Use timer_shutdown_sync() before hid_hw_stop() instead. It cancels the timer, waits for a running callback while pen_input is still valid, and prevents any further re-arming -- a later mod_timer() from an in-flight report is silently ignored -- so the timer is provably dead before hid_hw_stop() frees the inputs. This is the ordering the timer core documents for this "timer re-armed from another path" teardown case.

    Source: Ubuntu Security Notices, HKCERT (CC BY 3.0 HK) · HKCERT rating: medium, Debian LTS Advisories, Debian Security Advisories, BSI WID Portal, BSI CSAF, NVD (NIST), CVE.org (MITRE), ENISA EUVD, cvelistv5, Microsoft Security Update Guide

    Affected products

    The following versions are affected. Older releases of the same product line are also vulnerable unless stated otherwise.

    Affected products
    Affected versionsFixed in
    LinuxLinux
    • 7.2 – < 7.2.1
    • 5.16 – < 6.1.187
    • 5.1 – < 5.15.220
    • 6.7 – < 6.12.108
    • —
    • 6.13 – < 6.18.47
    • 6.19 – < 7.1.11
    • 6.2 – < 6.6.156
    • 7.2.1
    • 6.1.187
    • 5.15.220
    • 6.12.108
    • 7.3
    • 6.18.47
    • 7.1.11
    • 6.6.156
    Red HatOpenShift
    • Container Platform
    • —

    Vendors and products

    Affected operating systems

    Affected operating systems
    Linuxdebianlinuxbookworm
    Linuxdebianlinuxtrixie
    Linuxubuntulinuxjammy
    Linuxubuntulinuxnoble
    Linuxubuntulinuxresolute
    Linuxdebianlinux-6.12bookworm
    Linuxubuntulinux-awsjammy
    Linuxubuntulinux-awsnoble
    Linuxubuntulinux-awsresolute
    Linuxubuntulinux-aws-5.15focal
    Linuxubuntulinux-aws-6.8jammy
    Linuxubuntulinux-aws-7.0noble
    Linuxubuntulinux-aws-fipsjammy
    Linuxubuntulinux-aws-fipsnoble
    Linuxubuntulinux-azurejammy
    Linuxubuntulinux-azurenoble
    Linuxubuntulinux-azureresolute
    Linuxubuntulinux-azure-5.15focal
    Linuxubuntulinux-azure-6.8jammy
    Linuxubuntulinux-azure-fdejammy
    Linuxubuntulinux-azure-fdenoble
    Linuxubuntulinux-azure-fderesolute
    Linuxubuntulinux-azure-fde-5.15focal
    Linuxubuntulinux-azure-fde-6.8jammy

    References & sources

    Changes to this CVE

    Who changed this CVE and when: NVD (analysis, affected products, CVSS), the CVE publisher (CNA) and additional providers such as CISA (ADP).

    1. Record modifiedLinux

      1 individual change: Affected versions (publisher)

      Show the original change
      Individual changes of this event as published by NVD
      TypeActionBeforeAfter
      Affected versions (publisher)added
      —
      Affected value modified. <a href="https://github.com/CVEProject/cvelistV5/blob/main/cves/2026/80xxx/CVE-2026-80766.json">CVE-2026-80766</a>

      Source identifier: 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    2. ReceivedLinux

      Description added or changed

      Show 10 original changes
      Individual changes of this event as published by NVD
      TypeActionBeforeAfter
      Descriptionadded
      —
      In the Linux kernel, the following vulnerability has been resolved: HID: uclogic: fix use-after-free of inrange_timer on remove uclogic_remove() cancels the pen in-range timer and then stops the device: timer_delete_sync(&drvdata->inrange_timer); hid_hw_stop(hdev); timer_delete_sync() only guarantees the timer is idle at that instant. uclogic_raw_event_pen() keeps delivering pen reports until hid_hw_stop() stops the transport several lines later, and every report with pen->inrange == UCLOGIC_PARAMS_PEN_INRANGE_NONE re-arms the timer: mod_timer(&drvdata->inrange_timer, jiffies + msecs_to_jiffies(100)); A report landing between the timer_delete_sync() call and the transport teardown in hid_hw_stop() re-arms inrange_timer after it was cancelled. uclogic_remove() then returns and the devm drvdata is freed, while hid_hw_stop() has already freed the input device drvdata->pen_input points at, so when the timer fires ~100 ms later uclogic_inrange_timeout() dereferences freed memory -- a use-after-free in timer-softirq context. Swapping the two calls is not a fix: stopping the device first frees drvdata->pen_input via hidinput_disconnect() while the timer may still be pending, so a timer already armed before removal fires on the freed input device in the window before timer_delete_sync() runs. Use timer_shutdown_sync() before hid_hw_stop() instead. It cancels the timer, waits for a running callback while pen_input is still valid, and prevents any further re-arming -- a later mod_timer() from an in-flight report is silently ignored -- so the timer is provably dead before hid_hw_stop() frees the inputs. This is the ordering the timer core documents for this "timer re-armed from another path" teardown case.
      Affected versions (publisher)added
      —
      New affected value received. <a href="https://github.com/CVEProject/cvelistV5/blob/main/cves/2026/80xxx/CVE-2026-80766.json">CVE-2026-80766</a>
      Referenceadded
      —
      https://git.kernel.org/stable/c/506fd50a9027340f0e9dcc587d10ccb03312dba6
      Referenceadded
      —
      https://git.kernel.org/stable/c/849e537160bbb77fe419ecc3944bfe125dcd441b
      Referenceadded
      —
      https://git.kernel.org/stable/c/9d77ac82e57ead056cf3f71d347083ed9244ad90
      Referenceadded
      —
      https://git.kernel.org/stable/c/dc5108f18f58870a8dd4203a02a47e571a2be7f0
      Referenceadded
      —
      https://git.kernel.org/stable/c/e750cdb6de009aace3c77f37fe2173f96175e8e4
      Referenceadded
      —
      https://git.kernel.org/stable/c/f13d0a00204b05e62336da0ab72ea0d87b56690c
      Referenceadded
      —
      https://git.kernel.org/stable/c/f1b3ca06380531f49f988f4721d3ed30b0d7a5d2
      Referenceadded
      —
      https://git.kernel.org/stable/c/f40243358b407aec362fe305fabfcdc94a3abd89

      Source identifier: 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    Embed badge

    Show the severity and KEV status of this vulnerability on your site – with a link back here. The image is updated hourly.

    Badge preview for CVE-2026-80766
    <a href="https://intel.neosec.eu/en/cve/CVE-2026-80766"><img src="https://intel.neosec.eu/badge/cve/CVE-2026-80766.svg?lang=en" alt="CVE-2026-80766 – NEOSEC Intel" height="20"></a>