HighCVE-2026-20010

    Cisco NX-OS Software: Buffer Access with Incorrect Length Value (CVE-2026-20010)

    Published Sources: CVE.org

    What is affected, what to do

    A vulnerability in the Link Layer Discovery Protocol (LLDP) feature of Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause the LLDP process to restart, which could cause an affected device to reload unexpectedly. This vulnerability is due to improper handling of specific fields in an LLDP frame.

    The available sources name no fixed version. Check the vendor guidance in the references below.

    Affected
    • Cisco NX-OS System Software in ACI Mode eq 16.1(2f)..16.1(2f)
    • Cisco NX-OS Software eq 10.3(1)..10.3(1)
    • Cisco NX-OS Software eq 10.3(2)..10.3(2)
    • Cisco NX-OS Software eq 10.3(3)..10.3(3)
    • Cisco NX-OS Software eq 10.4(1)..10.4(1)
    • Cisco NX-OS Software eq 10.3(99w)..10.3(99w)
    • Cisco NX-OS Software eq 10.3(3w)..10.3(3w)
    • Cisco NX-OS Software eq 10.3(99x)..10.3(99x)
    • Cisco NX-OS Software eq 10.3(3o)..10.3(3o)
    • Cisco NX-OS Software eq 10.3(4)..10.3(4)
    • Cisco NX-OS Software eq 10.3(3p)..10.3(3p)
    • Cisco NX-OS Software eq 10.3(4a)..10.3(4a)
    • Cisco NX-OS Software eq 10.4(2)..10.4(2)
    • Cisco NX-OS Software eq 10.3(3q)..10.3(3q)
    • Cisco NX-OS Software eq 10.3(3x)..10.3(3x)
    • Cisco NX-OS Software eq 10.3(4g)..10.3(4g)
    • Cisco NX-OS Software eq 10.3(3r)..10.3(3r)
    • Cisco NX-OS Software eq 10.3(4h)..10.3(4h)
    • Cisco NX-OS System Software in ACI Mode eq 16.0(2h)..16.0(2h)
    • Cisco NX-OS System Software in ACI Mode eq 16.0(2j)..16.0(2j)
    • Cisco NX-OS System Software in ACI Mode eq 16.0(3d)..16.0(3d)
    • Cisco NX-OS System Software in ACI Mode eq 16.0(3e)..16.0(3e)
    • Cisco NX-OS System Software in ACI Mode eq 16.0(4c)..16.0(4c)
    • Cisco NX-OS System Software in ACI Mode eq 16.0(5h)..16.0(5h)
    • Cisco NX-OS System Software in ACI Mode eq 16.0(3g)..16.0(3g)
    • Cisco NX-OS System Software in ACI Mode eq 16.0(5j)..16.0(5j)
    • Cisco NX-OS System Software in ACI Mode eq 16.0(6c)..16.0(6c)
    • Cisco NX-OS System Software in ACI Mode eq 16.1(1f)..16.1(1f)
    • Cisco NX-OS System Software in ACI Mode eq 16.0(7e)..16.0(7e)
    • Cisco NX-OS System Software in ACI Mode eq 16.0(8e)..16.0(8e)
    • Cisco NX-OS System Software in ACI Mode eq 16.0(8f)..16.0(8f)
    • Cisco NX-OS System Software in ACI Mode eq 16.1(2g)..16.1(2g)
    • Cisco NX-OS System Software in ACI Mode eq 16.0(9c)..16.0(9c)
    • Cisco NX-OS System Software in ACI Mode eq 16.1(3f)..16.1(3f)
    • Cisco NX-OS System Software in ACI Mode eq 16.0(9d)..16.0(9d)
    • Cisco NX-OS System Software in ACI Mode eq 16.0(6h)..16.0(6h)
    • Cisco NX-OS System Software in ACI Mode eq 16.0(8h)..16.0(8h)
    • Cisco NX-OS System Software in ACI Mode eq 16.1(3g)..16.1(3g)
    • Cisco Unified Computing System (Managed) eq 4.3(4e)..4.3(4e)
    • Cisco Unified Computing System (Managed) eq 4.3(6b)..4.3(6b)
    • Cisco Unified Computing System (Managed) eq 4.3(4c)..4.3(4c)
    • Cisco Unified Computing System (Managed) eq 4.3(4f)..4.3(4f)
    • Cisco Unified Computing System (Managed) eq 4.3(6d)..4.3(6d)
    • Cisco Unified Computing System (Managed) eq 4.3(5e)..4.3(5e)
    • Cisco Unified Computing System (Managed) eq 4.3(4d)..4.3(4d)
    • Cisco Unified Computing System (Managed) eq 4.3(4b)..4.3(4b)
    • Cisco Unified Computing System (Managed) eq 4.3(5a)..4.3(5a)
    • Cisco Unified Computing System (Managed) eq 4.3(5c)..4.3(5c)
    • Cisco Unified Computing System (Managed) eq 4.3(5d)..4.3(5d)
    • Cisco Unified Computing System (Managed) eq 4.3(6c)..4.3(6c)
    • Cisco Unified Computing System (Managed) eq 4.3(6a)..4.3(6a)

    Not sure whether and how you are affected? Ask a question about this vulnerability

    Metrics

    7.4

    Priority

    XIEM Effective CVSS: highest available CVSS rating from NVD and vendor data.

    Source: Vendor (CNA), CVSS v3

    7.4

    CVSS v3

    Severity High on the scale from 0 to 10.

    Source: CVE.org

    0.2 %

    EPSS score

    Low — model estimates < 1% exploitation likelihood.

    Source: FIRST EPSS, percentile 8.1

    Show all metrics
    Severity
    High
    Priority (0–325)

    The priority score is a consolidated metric that condenses several individual signals into a single, action-guiding ranking: technical severity (CVSS), exploitation likelihood (EPSS), known-exploited status (KEV) and the context of the affected asset. The aim is to answer the only truly important question in vulnerability management: what first?

    Read in glossary
    52.15 Methodology
    Exploit maturity

    An exploit is code or a technique that specifically uses a concrete vulnerability to force unintended behaviour — such as executing code or escalating privileges. It is the tool that turns a theoretical flaw into a practical attack.

    Read in glossary
    no public PoC known
    XIEM Effective CVSS

    XIEM® is the tiered managed-security operating model from NEOSEC and a registered trademark of NEOSEC GmbH. It extends classic SIEM — the central collection, normalisation and correlation of security-relevant events — with endpoint forensics, network visibility and deception technology, and consolidates them into three building tiers: Sentry, Orchestrate and Command.

    Read in glossary
    7.4 Methodology
    CVSS v3

    CVSS is the globally established, open standard for assessing the technical severity of a vulnerability on a scale from 0 to 10. It describes how easily a flaw can be exploited and what damage it can cause — but not how likely its actual exploitation is. CVSS and the complementary EPSS deliberately answer different questions.

    Read in glossary
    7.4
    EPSS score

    The EPSS score is the absolute model output for an individual vulnerability: the estimated probability of real-world exploitation within the next 30 days, expressed as a value between 0 and 1 (i.e. 0 % to 100 %). A score of 0.42 means „the model estimates a 42 % chance of real-world exploitation within 30 days“.

    Read in glossary
    0.2 %
    Low — model estimates < 1% exploitation likelihood.
    EPSS percentile

    The EPSS percentile is the relative position of a vulnerability within all EPSS-scored CVEs, expressed as a value between 0 and 1. A percentile of 0.90 means „this CVE has a higher EPSS score than 90 % of all other scored CVEs“. Unlike the EPSS score, it is not a probability — but a positioning within a ranking.

    Read in glossary
    8.1
    Low — this CVE sits in the lower 10% of all CVEs scored today.
    KEV status

    The KEV catalogue is a list maintained by the US authority CISA of vulnerabilities for which active exploitation in the wild has been confirmed. It answers not the question „how severe?“ but „is it already being attacked?“ — thereby sharply prioritising patching.

    Read in glossary
    —
    Published
    CISA assessment (SSVC)
    Exploitation: none known · not automatable · Technical impact: partial
    Source: CISA Vulnrichment, as of 25 February 2026
    CWE

    CWE is a catalogue of typical weakness types in software and hardware — such as flawed input validation, unsafe memory handling or poor authentication. Where a CVE names a concrete vulnerability in a concrete product, a CWE describes the underlying class of defect.

    Read in glossary
    CWE-805

    Detection rules

    No NEOSEC detection rule is available for this vulnerability yet.

    Classification under NIS2 and CRA

    Rule-based classification from exploitation status and severity. It does not replace a case-by-case assessment.

    NIS2

    NIS2 is EU Directive (EU) 2022/2555 to raise the level of cybersecurity across the Union. It substantially broadens obligations compared with the first NIS directive: more sectors, mandatory risk management, staged reporting duties and personal accountability of senior management.

    Read in glossary
    High technical severity: assess and remediate the vulnerability in vulnerability handling under Art. 21(2)(e) NIS2 and document the decision.
    CRA

    The CRA is EU Regulation (EU) 2024/2847 setting horizontal cybersecurity requirements for „products with digital elements“ — from industrial controllers and software to connected consumer devices. For the first time manufacturers must ensure security across the entire product lifecycle, handle vulnerabilities and provide security updates.

    Read in glossary
    From 11.12.2027, Annex I Part II CRA requires manufacturers of affected products with digital elements to handle vulnerabilities without delay and provide security updates.
    ISO/IEC 27001

    ISO/IEC 27001 is the internationally leading standard for an information security management system (ISMS). It describes a risk-based, process-oriented framework to systematically plan, implement, review and improve information security.

    Read in glossary
    Control A.8.8, management of technical vulnerabilities: assess relevance to your systems, plan remediation and keep evidence.

    Description

    A vulnerability in the Link Layer Discovery Protocol (LLDP) feature of Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause the LLDP process to restart, which could cause an affected device to reload unexpectedly. This vulnerability is due to improper handling of specific fields in an LLDP frame. An attacker could exploit this vulnerability by sending a crafted LLDP packet to an interface of an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a denial of service (DoS) condition. Note:&nbsp;LLDP is a Layer 2 link protocol. To exploit this vulnerability, an attacker would need to be&nbsp;directly connected to an interface of an affected device, either physically or logically (for example, through a Layer 2 Tunnel configured to transport the LLDP protocol).

    Source: NVD (NIST), cvelistv5

    Affected products

    The following versions are affected. Older releases of the same product line are also vulnerable unless stated otherwise.

    Affected products
    Affected versionsFixed in
    CiscoCisco NX-OS Software
    • 10.4(2)
    • 10.3(4)
    • 10.3(3w)
    • 10.3(3)
    • 10.3(1)
    • 10.3(4g)
    • 10.3(99x)
    • 10.3(4h)
    • 10.3(3x)
    • 10.3(3r)
    • 10.3(3o)
    • 10.4(1)
    • 10.3(3p)
    • 10.3(2)
    • 10.3(3q)
    • 10.3(99w)
    • 10.3(4a)
    • —
    • —
    • —
    • —
    • —
    • —
    • —
    • —
    • —
    • —
    • —
    • —
    • —
    • —
    • —
    • —
    • —
    CiscoCisco NX-OS System Software in ACI Mode
    • 16.0(4c)
    • 16.0(8h)
    • 16.1(3g)
    • 16.0(2j)
    • 16.0(2h)
    • 16.0(3e)
    • 16.0(6h)
    • 16.0(3g)
    • 16.0(6c)
    • 16.0(9d)
    • 16.0(9c)
    • 16.1(2g)
    • 16.1(3f)
    • 16.1(1f)
    • 16.0(5h)
    • 16.0(7e)
    • 16.0(8e)
    • 16.0(3d)
    • 16.0(5j)
    • 16.0(8f)
    • 16.1(2f)
    • —
    • —
    • —
    • —
    • —
    • —
    • —
    • —
    • —
    • —
    • —
    • —
    • —
    • —
    • —
    • —
    • —
    • —
    • —
    • —
    • —
    CiscoCisco Unified Computing System (Managed)
    • 4.3(4f)
    • 4.3(4c)
    • 4.3(6b)
    • 4.3(4d)
    • 4.3(6a)
    • 4.3(5a)
    • 4.3(6c)
    • 4.3(4e)
    • 4.3(5e)
    • 4.3(5d)
    • —
    • —
    • —
    • —
    • —
    • —
    • —
    • —
    • —
    • —

    Vendors and products

    Weakness classes (CWE)

    • CWE-805Buffer Access with Incorrect Length Value

      Base

      The product uses a sequential operation to read or write a buffer, but it uses an incorrect length value that causes it to access memory that is outside of the bounds of the buffer.

      Entry at MITRE CWE-805

    References & sources

    Embed badge

    Show the severity and KEV status of this vulnerability on your site – with a link back here. The image is updated hourly.

    Badge preview for CVE-2026-20010
    <a href="https://intel.neosec.eu/en/cve/CVE-2026-20010"><img src="https://intel.neosec.eu/badge/cve/CVE-2026-20010.svg?lang=en" alt="CVE-2026-20010 – NEOSEC Intel" height="20"></a>