Zephyrproject Zephyr: Operation on Resource in Wrong Phase of Lifetime (CVE-2026-16148)
Published Last modified Sources: CVE.org, EUVD
What is affected, what to do
The ITE it82xx2 USB device-controller driver initialized its bus-suspend detection work with k_work_init_delayable(&priv->suspended_work, suspended_handler) inside it82xx2_enable() (the driver's .enable op) in drivers/usb/udc/udc_it82xx2.c. This work item is scheduled essentially continuously while the USB bus is active: the interrupt handler reschedules it on every SOF frame and suspended_handler() reschedules itself, so its timeout node is normally linked in the kernel timeout list / a workqueue pending queue. k_work_init_delayable() (kernel/work.c) unconditionally overwrites the entire k_work_delayable structure, including its timeout and queue linkage, with no busy check.
Update Zephyrproject Zephyr to version 4.3.2, Zephyrproject Zephyr to version 4.4.2.
- Affected
- Zephyrproject Zephyr
lt 3.7.0..4.3.2 - Zephyrproject Zephyr
lt 4.4.0..4.4.2
- Zephyrproject Zephyr
- Fixed in
- Zephyrproject Zephyr
4.3.2 - Zephyrproject Zephyr
4.4.2
- Zephyrproject Zephyr
Not sure whether and how you are affected? Ask a question about this vulnerability
Metrics
4.6
XIEM Effective CVSS
Highest available CVSS rating from NVD and vendor data.
Source: Vendor (CNA), CVSS v3
4.6
CVSS v3
Severity Medium on the scale from 0 to 10.
Source: CVE.org, EUVD
0.2 %
EPSS score
Low — model estimates < 1% exploitation likelihood.
Source: FIRST EPSS, percentile 14.0
Show all metrics
- Severity
- Medium
Priority (0–325)
The priority score is a consolidated metric that condenses several individual signals into a single, action-guiding ranking: technical severity (CVSS), exploitation likelihood (EPSS), known-exploited status (KEV) and the context of the affected asset. The aim is to answer the only truly important question in vulnerability management: what first?
Read in glossary- 49.93 Methodology
Exploit maturity
An exploit is code or a technique that specifically uses a concrete vulnerability to force unintended behaviour — such as executing code or escalating privileges. It is the tool that turns a theoretical flaw into a practical attack.
Read in glossary- no public PoC known
XIEM Effective CVSS
XIEM® is the tiered managed-security operating model from NEOSEC and a registered trademark of NEOSEC GmbH. It extends classic SIEM — the central collection, normalisation and correlation of security-relevant events — with endpoint forensics, network visibility and deception technology, and consolidates them into three building tiers: Sentry, Orchestrate and Command.
Read in glossary- 4.6 Methodology
CVSS v3
CVSS is the globally established, open standard for assessing the technical severity of a vulnerability on a scale from 0 to 10. It describes how easily a flaw can be exploited and what damage it can cause — but not how likely its actual exploitation is. CVSS and the complementary EPSS deliberately answer different questions.
Read in glossary- 4.6
EPSS score
The EPSS score is the absolute model output for an individual vulnerability: the estimated probability of real-world exploitation within the next 30 days, expressed as a value between 0 and 1 (i.e. 0 % to 100 %). A score of 0.42 means „the model estimates a 42 % chance of real-world exploitation within 30 days“.
Read in glossary- 0.2 %
- Low — model estimates < 1% exploitation likelihood.
EPSS percentile
The EPSS percentile is the relative position of a vulnerability within all EPSS-scored CVEs, expressed as a value between 0 and 1. A percentile of 0.90 means „this CVE has a higher EPSS score than 90 % of all other scored CVEs“. Unlike the EPSS score, it is not a probability — but a positioning within a ranking.
Read in glossary- 14.0
- Elevated — this CVE ranks above at least 10% of all CVEs scored today.
KEV status
The KEV catalogue is a list maintained by the US authority CISA of vulnerabilities for which active exploitation in the wild has been confirmed. It answers not the question „how severe?“ but „is it already being attacked?“ — thereby sharply prioritising patching.
Read in glossary- —
- Published
- CISA assessment (SSVC)
- Exploitation: none known · not automatable · Technical impact: partial
- Source: CISA Vulnrichment, as of 14 September 2026
CWE
CWE is a catalogue of typical weakness types in software and hardware — such as flawed input validation, unsafe memory handling or poor authentication. Where a CVE names a concrete vulnerability in a concrete product, a CWE describes the underlying class of defect.
Read in glossary- CWE-666
Detection rules
No NEOSEC detection rule is available for this vulnerability yet.
Classification under NIS2 and CRA
Rule-based classification from exploitation status and severity. It does not replace a case-by-case assessment.
NIS2
NIS2 is EU Directive (EU) 2022/2555 to raise the level of cybersecurity across the Union. It substantially broadens obligations compared with the first NIS directive: more sectors, mandatory risk management, staged reporting duties and personal accountability of senior management.
Read in glossary- Handle the vulnerability in regular vulnerability handling under Art. 21(2)(e) NIS2.
CRA
The CRA is EU Regulation (EU) 2024/2847 setting horizontal cybersecurity requirements for „products with digital elements“ — from industrial controllers and software to connected consumer devices. For the first time manufacturers must ensure security across the entire product lifecycle, handle vulnerabilities and provide security updates.
Read in glossary- From 11.12.2027, Annex I Part II CRA requires manufacturers of affected products with digital elements to handle vulnerabilities without delay and provide security updates.
ISO/IEC 27001
ISO/IEC 27001 is the internationally leading standard for an information security management system (ISMS). It describes a risk-based, process-oriented framework to systematically plan, implement, review and improve information security.
Read in glossary- Control A.8.8, management of technical vulnerabilities: assess relevance to your systems, plan remediation and keep evidence.
Description
The ITE it82xx2 USB device-controller driver initialized its bus-suspend detection work with k_work_init_delayable(&priv->suspended_work, suspended_handler) inside it82xx2_enable() (the driver's .enable op) in drivers/usb/udc/udc_it82xx2.c. This work item is scheduled essentially continuously while the USB bus is active: the interrupt handler reschedules it on every SOF frame and suspended_handler() reschedules itself, so its timeout node is normally linked in the kernel timeout list / a workqueue pending queue. k_work_init_delayable() (kernel/work.c) unconditionally overwrites the entire k_work_delayable structure, including its timeout and queue linkage, with no busy check. Because it82xx2_disable() does not cancel the work, a normal disable-then-enable cycle re-runs api->enable() (udc_enable() only rejects a redundant enable, not a re-enable after disable) and re-initializes the still-pending work in place, corrupting the kernel timeout/workqueue linked lists and causing a kernel panic. An external USB host — for example a host performing USB DFU detach (dfu-util --detach) or forcing repeated attach/reset/re-enumeration — drives the udc_disable()/udc_enable() transitions and controls suspend/resume timing, so it can arrange for the suspend work to be pending across a re-enable. This yields an unauthenticated denial of service (kernel panic) reachable across the USB boundary from a removable, physically-connected host, with no confidentiality or integrity impact demonstrated. The fix moves the k_work_init_delayable() call into the one-time preinit function so the work is initialized exactly once, eliminating the re-initialization of an in-use item.
Source: cvelistv5, NVD (NIST), ENISA EUVD
Affected products
The following versions are affected. Older releases of the same product line are also vulnerable unless stated otherwise.
| Affected versions | Fixed in | ||
|---|---|---|---|
| zephyrproject | zephyr |
|
|
Vendors and products
Weakness classes (CWE)
CWE-666Operation on Resource in Wrong Phase of Lifetime
Class
The product performs an operation on a resource at the wrong phase of the resource's lifecycle, which can lead to unexpected behaviors.
Entry at MITRE CWE-666
References & sources
- github.comFix commitPatch, euvd
- github.comGHSA-fvp9-j2pq-477xeuvd
Changes to this CVE
Who changed this CVE and when: NVD (analysis, affected products, CVSS), the CVE publisher (CNA) and additional providers such as CISA (ADP).
Record modifiedzephyrproject.org
1 individual change: Affected versions (publisher)
Show the original change
Individual changes of this event as published by NVD Type Action Before After Affected versions (publisher) added —Affected value modified. <a href="https://github.com/CVEProject/cvelistV5/blob/main/cves/2026/16xxx/CVE-2026-16148.json">CVE-2026-16148</a>Source identifier: vulnerabilities@zephyrproject.org
Receivedzephyrproject.org
CVSS V3.1: AV:P/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H
Weakness type: CWE-666
Description added or changed
Show 6 original changes
Individual changes of this event as published by NVD Type Action Before After Description added —The ITE it82xx2 USB device-controller driver initialized its bus-suspend detection work with k_work_init_delayable(&priv->suspended_work, suspended_handler) inside it82xx2_enable() (the driver's .enable op) in drivers/usb/udc/udc_it82xx2.c. This work item is scheduled essentially continuously while the USB bus is active: the interrupt handler reschedules it on every SOF frame and suspended_handler() reschedules itself, so its timeout node is normally linked in the kernel timeout list / a workqueue pending queue. k_work_init_delayable() (kernel/work.c) unconditionally overwrites the entire k_work_delayable structure, including its timeout and queue linkage, with no busy check. Because it82xx2_disable() does not cancel the work, a normal disable-then-enable cycle re-runs api->enable() (udc_enable() only rejects a redundant enable, not a re-enable after disable) and re-initializes the still-pending work in place, corrupting the kernel timeout/workqueue linked lists and causing a kernel panic. An external USB host — for example a host performing USB DFU detach (dfu-util --detach) or forcing repeated attach/reset/re-enumeration — drives the udc_disable()/udc_enable() transitions and controls suspend/resume timing, so it can arrange for the suspend work to be pending across a re-enable. This yields an unauthenticated denial of service (kernel panic) reachable across the USB boundary from a removable, physically-connected host, with no confidentiality or integrity impact demonstrated. The fix moves the k_work_init_delayable() call into the one-time preinit function so the work is initialized exactly once, eliminating the re-initialization of an in-use item.CVSS added —AV:P/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:HWeakness type (CWE) added —CWE-666Affected versions (publisher) added —New affected value received. <a href="https://github.com/CVEProject/cvelistV5/blob/main/cves/2026/16xxx/CVE-2026-16148.json">CVE-2026-16148</a>Reference added —https://github.com/zephyrproject-rtos/zephyr/commit/350fd5dfd49e6aca99724fb3f0d4998fe28b4b6cReference added —https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-fvp9-j2pq-477xSource identifier: vulnerabilities@zephyrproject.org
Record modifiedCISA ADP
CISA assessment (SSVC): exploitation: none known, automatable: no
Show the original change
Individual changes of this event as published by NVD Type Action Before After SSVC assessment added —{"id":"CVE-2026-16148","role":"CISA Coordinator","options":[{"exploitation":"none"},{"automatable":"no"},{"technicalImpact":"partial"}],"version":"2.0.3","timestamp":"2026-09-14T20:06:24.030736Z"}Source identifier: 134c704f-9b21-4f2e-91b3-4a467353bcc0
Embed badge
Show the severity and KEV status of this vulnerability on your site – with a link back here. The image is updated hourly.
<a href="https://intel.neosec.eu/en/cve/CVE-2026-16148"><img src="https://intel.neosec.eu/badge/cve/CVE-2026-16148.svg?lang=en" alt="CVE-2026-16148 – NEOSEC Intel" height="20"></a>