Improper Restriction of Excessive Authentication Attempts in hMailServer (CVE-2026-126618)
Published Last modified Sources: CVE.org, EUVD
What is affected, what to do
The auto-ban of Progressive Robot hMailServer 6.0.0-B1 through 6.3.7 can be kept from banning an address after repeated failed logons, which allows a remote unauthenticated attacker who can connect from two or more addresses to go on guessing account passwords - over SMTP AUTH, IMAP and POP3, and over ManageSieve, CalDAV/CardDAV and the REST API where those are turned on (off by default) - without being banned. When the failed logons counted from one address reach MaxInvalidLogonAttempts (3 by default), the server clears that address's count, saves an IP range that refuses the address for AutoBanMinutes (60 by default) and drops the connection.
The available sources name no fixed version. Check the vendor guidance in the references below.
- Affected
- Progressive Robot hMailServer
lte 6.0.0-B1..6.3.7
- Progressive Robot hMailServer
Not sure whether and how you are affected? Ask a question about this vulnerability
Metrics
5.3
XIEM Effective CVSS
Highest available CVSS rating from NVD and vendor data.
Source: Vendor (CNA), CVSS v3
5.3
CVSS v3
Severity Medium on the scale from 0 to 10.
Source: CVE.org, EUVD
0.4 %
EPSS score
Low — model estimates < 1% exploitation likelihood.
Source: FIRST EPSS, percentile 38.0
Show all metrics
- Severity
- Medium
Priority (0–325)
The priority score is a consolidated metric that condenses several individual signals into a single, action-guiding ranking: technical severity (CVSS), exploitation likelihood (EPSS), known-exploited status (KEV) and the context of the affected asset. The aim is to answer the only truly important question in vulnerability management: what first?
Read in glossary- 68.07 Methodology
Exploit maturity
An exploit is code or a technique that specifically uses a concrete vulnerability to force unintended behaviour — such as executing code or escalating privileges. It is the tool that turns a theoretical flaw into a practical attack.
Read in glossary- no public PoC known
XIEM Effective CVSS
XIEM® is the tiered managed-security operating model from NEOSEC and a registered trademark of NEOSEC GmbH. It extends classic SIEM — the central collection, normalisation and correlation of security-relevant events — with endpoint forensics, network visibility and deception technology, and consolidates them into three building tiers: Sentry, Orchestrate and Command.
Read in glossary- 5.3 Methodology
CVSS v3
CVSS is the globally established, open standard for assessing the technical severity of a vulnerability on a scale from 0 to 10. It describes how easily a flaw can be exploited and what damage it can cause — but not how likely its actual exploitation is. CVSS and the complementary EPSS deliberately answer different questions.
Read in glossary- 5.3
EPSS score
The EPSS score is the absolute model output for an individual vulnerability: the estimated probability of real-world exploitation within the next 30 days, expressed as a value between 0 and 1 (i.e. 0 % to 100 %). A score of 0.42 means „the model estimates a 42 % chance of real-world exploitation within 30 days“.
Read in glossary- 0.4 %
- Low — model estimates < 1% exploitation likelihood.
EPSS percentile
The EPSS percentile is the relative position of a vulnerability within all EPSS-scored CVEs, expressed as a value between 0 and 1. A percentile of 0.90 means „this CVE has a higher EPSS score than 90 % of all other scored CVEs“. Unlike the EPSS score, it is not a probability — but a positioning within a ranking.
Read in glossary- 38.0
- High — this CVE ranks above the median of all CVEs scored today (rank ≥ 36%).
KEV status
The KEV catalogue is a list maintained by the US authority CISA of vulnerabilities for which active exploitation in the wild has been confirmed. It answers not the question „how severe?“ but „is it already being attacked?“ — thereby sharply prioritising patching.
Read in glossary- —
- Published
CWE
CWE is a catalogue of typical weakness types in software and hardware — such as flawed input validation, unsafe memory handling or poor authentication. Where a CVE names a concrete vulnerability in a concrete product, a CWE describes the underlying class of defect.
Read in glossary- CWE-307
Detection rules
No NEOSEC detection rule is available for this vulnerability yet.
Classification under NIS2 and CRA
Rule-based classification from exploitation status and severity. It does not replace a case-by-case assessment.
NIS2
NIS2 is EU Directive (EU) 2022/2555 to raise the level of cybersecurity across the Union. It substantially broadens obligations compared with the first NIS directive: more sectors, mandatory risk management, staged reporting duties and personal accountability of senior management.
Read in glossary- Handle the vulnerability in regular vulnerability handling under Art. 21(2)(e) NIS2.
CRA
The CRA is EU Regulation (EU) 2024/2847 setting horizontal cybersecurity requirements for „products with digital elements“ — from industrial controllers and software to connected consumer devices. For the first time manufacturers must ensure security across the entire product lifecycle, handle vulnerabilities and provide security updates.
Read in glossary- From 11.12.2027, Annex I Part II CRA requires manufacturers of affected products with digital elements to handle vulnerabilities without delay and provide security updates.
ISO/IEC 27001
ISO/IEC 27001 is the internationally leading standard for an information security management system (ISMS). It describes a risk-based, process-oriented framework to systematically plan, implement, review and improve information security.
Read in glossary- Control A.8.8, management of technical vulnerabilities: assess relevance to your systems, plan remediation and keep evidence.
Description
The auto-ban of Progressive Robot hMailServer 6.0.0-B1 through 6.3.7 can be kept from banning an address after repeated failed logons, which allows a remote unauthenticated attacker who can connect from two or more addresses to go on guessing account passwords - over SMTP AUTH, IMAP and POP3, and over ManageSieve, CalDAV/CardDAV and the REST API where those are turned on (off by default) - without being banned. When the failed logons counted from one address reach MaxInvalidLogonAttempts (3 by default), the server clears that address's count, saves an IP range that refuses the address for AutoBanMinutes (60 by default) and drops the connection. The range is named "Auto-ban: " followed by the user name of the logon that reached the limit, and no two ranges may have the same name. The server chooses the name by checking candidates as written - the name, then the name with a number, a random suffix or a GUID added - and only then cuts it to the 100 characters the database column holds, so that with a user name of 90 characters or more every candidate is the same once cut. While one range named after such a user name stands, every later ban named after a user name with the same first 90 characters therefore fails at the database: no range is saved, the address is not refused, and, its count having already been cleared, it is given the next full set of attempts. A user name of 78 to 89 characters makes later bans fail in the same way: from the second, the third or the twelfth on, depending on its length and the database, or, from 78 to 85 characters, by chance. An attacker who has once had an address banned under such a name can in this way keep guessing passwords from any other address, ending each set of attempts with a logon under a name of that kind; each failed save is reported in the server's error log (as the database error HM5032, and from 6.2.19 also as HM6099). On SQL Server a user name holding characters outside the database's code page has the same effect at any length, because the check compared names in that code page; that save is refused by the server's own check of the name, with no database error, and is reported only from 6.2.19 (HM6099). A user name holding a NUL character, which the web services listener's HTTP Basic sign-in (off by default) carries from 6.3.3 and, on the Linux builds, IMAP LOGIN, offered as installed, from 6.3.0, makes bans fail at any length: on MySQL, MariaDB and PostgreSQL the statements that check the name and save the range end at the character, so that every ban named after such a name fails, from the first and from a single address, and, its count having already been cleared, the address is given the next full set of attempts; on SQL Server and SQL Server Compact the name is bound only as far as the character, so that while one range under the part before it stands, every later ban named after such a name fails. On SQL Server, and on MySQL and MariaDB for an account whose local part has nine characters or more, a guess at the account can itself carry a name of that kind, since those databases find an account under its address followed by spaces (and SQL Server also under one holding characters its comparison ignores), so that not even a MaxInvalidLogonAttempts of 1, which bans each failed logon under the name it gave, avoids it there.
Source: NVD (NIST), ENISA EUVD, cvelistv5, CVE.org (MITRE)
Affected products
The following versions are affected. Older releases of the same product line are also vulnerable unless stated otherwise.
| Affected versions | Fixed in | ||
|---|---|---|---|
| Progressive Robot Ltd | hMailServer |
|
|
Vendors and products
Weakness classes (CWE)
CWE-307Improper Restriction of Excessive Authentication Attempts
Base
The product does not implement sufficient measures to prevent multiple failed authentication attempts within a short time frame.
Entry at MITRE CWE-307
References & sources
- gitlab.comhmailserver/hmailserver/-/work_items/102euvd
- gitlab.comhmailserver/hmailserver/-/releases/v6.3.8euvd
- NVD (NIST)vuln/detail/CVE-2026-126618euvd
Changes to this CVE
Who changed this CVE and when: NVD (analysis, affected products, CVSS), the CVE publisher (CNA) and additional providers such as CISA (ADP).
ReceivedGitLab
CVSS V3.1: AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N
Weakness type: CWE-307
Description added or changed
Show 6 original changes
Individual changes of this event as published by NVD Type Action Before After Description added —The auto-ban of Progressive Robot hMailServer 6.0.0-B1 through 6.3.7 can be kept from banning an address after repeated failed logons, which allows a remote unauthenticated attacker who can connect from two or more addresses to go on guessing account passwords - over SMTP AUTH, IMAP and POP3, and over ManageSieve, CalDAV/CardDAV and the REST API where those are turned on (off by default) - without being banned. When the failed logons counted from one address reach MaxInvalidLogonAttempts (3 by default), the server clears that address's count, saves an IP range that refuses the address for AutoBanMinutes (60 by default) and drops the connection. The range is named "Auto-ban: " followed by the user name of the logon that reached the limit, and no two ranges may have the same name. The server chooses the name by checking candidates as written - the name, then the name with a number, a random suffix or a GUID added - and only then cuts it to the 100 characters the database column holds, so that with a user name of 90 characters or more every candidate is the same once cut. While one range named after such a user name stands, every later ban named after a user name with the same first 90 characters therefore fails at the database: no range is saved, the address is not refused, and, its count having already been cleared, it is given the next full set of attempts. A user name of 78 to 89 characters makes later bans fail in the same way: from the second, the third or the twelfth on, depending on its length and the database, or, from 78 to 85 characters, by chance. An attacker who has once had an address banned under such a name can in this way keep guessing passwords from any other address, ending each set of attempts with a logon under a name of that kind; each failed save is reported in the server's error log (as the database error HM5032, and from 6.2.19 also as HM6099). On SQL Server a user name holding characters outside the database's code page has the same effect at any length, because the check compared names in that code page; that save is refused by the server's own check of the name, with no database error, and is reported only from 6.2.19 (HM6099). A user name holding a NUL character, which the web services listener's HTTP Basic sign-in (off by default) carries from 6.3.3 and, on the Linux builds, IMAP LOGIN, offered as installed, from 6.3.0, makes bans fail at any length: on MySQL, MariaDB and PostgreSQL the statements that check the name and save the range end at the character, so that every ban named after such a name fails, from the first and from a single address, and, its count having already been cleared, the address is given the next full set of attempts; on SQL Server and SQL Server Compact the name is bound only as far as the character, so that while one range under the part before it stands, every later ban named after such a name fails. On SQL Server, and on MySQL and MariaDB for an account whose local part has nine characters or more, a guess at the account can itself carry a name of that kind, since those databases find an account under its address followed by spaces (and SQL Server also under one holding characters its comparison ignores), so that not even a MaxInvalidLogonAttempts of 1, which bans each failed logon under the name it gave, avoids it there.CVSS added —AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:NWeakness type (CWE) added —CWE-307Affected versions (publisher) added —New affected value received. <a href="https://github.com/CVEProject/cvelistV5/blob/main/cves/2026/126xxx/CVE-2026-126618.json">CVE-2026-126618</a>Reference added —https://gitlab.com/hmailserver/hmailserver/-/releases/v6.3.8Reference added —https://gitlab.com/hmailserver/hmailserver/-/work_items/102Source identifier: cve@gitlab.com
Embed badge
Show the severity and KEV status of this vulnerability on your site – with a link back here. The image is updated hourly.
<a href="https://intel.neosec.eu/en/cve/CVE-2026-126618"><img src="https://intel.neosec.eu/badge/cve/CVE-2026-126618.svg?lang=en" alt="CVE-2026-126618 – NEOSEC Intel" height="20"></a>