HighCVE-2026-98736

    Linux Kernel: Use-After-Free (CVE-2026-98736)

    Published Last modified Sources: Debian LTS, Msrc Update Guide, CVE.org, BSI

    Share

    What is affected, what to do

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_conn: Lock parent access during enhanced SCO setup Bluetooth: hci_conn: Lock parent access during enhanced SCO setup hci_enhanced_setup_sync() runs on the request workqueue without the hci_dev_lock held by its caller when setup was queued. Its CVSD capability check and find_next_esco_param() dereference conn->parent while the receive workqueue can unlink and release that parent.

    Update Linux Kernel to version 6.1.191, Linux Kernel to version 6.6.160, Linux Kernel to version 6.12.113.

    Affected
    • Linux Kernel lt 6.1..6.1.191
    • Linux Kernel lt 6.2..6.6.160
    • Linux Kernel lt 6.7..6.12.113
    • Linux Kernel lt 6.13..6.18.56
    • Linux Kernel lt 6.19..7.2.10
    Fixed in
    • Linux Kernel 6.1.191
    • Linux Kernel 6.6.160
    • Linux Kernel 6.12.113
    • Linux Kernel 6.18.56
    • Linux Kernel 7.2.10
    • Linux Kernel 7.3

    Not sure whether and how you are affected? Ask a question about this vulnerability

    Metrics

    7.1

    Priority

    XIEM Effective CVSS: highest available CVSS rating from NVD and vendor data.

    Source: Vendor (CNA), CVSS v3

    7.1

    CVSS v3

    Severity High on the scale from 0 to 10.

    Source: Debian LTS, Msrc Update Guide, CVE.org, BSI

    0.2 %

    EPSS score

    Low — model estimates < 1% exploitation likelihood.

    Source: FIRST EPSS, percentile 6.6

    Show all metrics
    Severity
    High
    Priority (0–325)

    The priority score is a consolidated metric that condenses several individual signals into a single, action-guiding ranking: technical severity (CVSS), exploitation likelihood (EPSS), known-exploited status (KEV) and the context of the affected asset. The aim is to answer the only truly important question in vulnerability management: what first?

    Read in glossary
    65.85 Methodology
    Exploit maturity

    An exploit is code or a technique that specifically uses a concrete vulnerability to force unintended behaviour — such as executing code or escalating privileges. It is the tool that turns a theoretical flaw into a practical attack.

    Read in glossary
    no public PoC known
    XIEM Effective CVSS

    XIEM® is the tiered managed-security operating model from NEOSEC and a registered trademark of NEOSEC GmbH. It extends classic SIEM — the central collection, normalisation and correlation of security-relevant events — with endpoint forensics, network visibility and deception technology, and consolidates them into three building tiers: Sentry, Orchestrate and Command.

    Read in glossary
    7.1 Methodology
    CVSS v3

    CVSS is the globally established, open standard for assessing the technical severity of a vulnerability on a scale from 0 to 10. It describes how easily a flaw can be exploited and what damage it can cause — but not how likely its actual exploitation is. CVSS and the complementary EPSS deliberately answer different questions.

    Read in glossary
    7.1
    EPSS score

    The EPSS score is the absolute model output for an individual vulnerability: the estimated probability of real-world exploitation within the next 30 days, expressed as a value between 0 and 1 (i.e. 0 % to 100 %). A score of 0.42 means „the model estimates a 42 % chance of real-world exploitation within 30 days“.

    Read in glossary
    0.2 %
    Low — model estimates < 1% exploitation likelihood.
    EPSS percentile

    The EPSS percentile is the relative position of a vulnerability within all EPSS-scored CVEs, expressed as a value between 0 and 1. A percentile of 0.90 means „this CVE has a higher EPSS score than 90 % of all other scored CVEs“. Unlike the EPSS score, it is not a probability — but a positioning within a ranking.

    Read in glossary
    6.6
    Low — this CVE sits in the lower 10% of all CVEs scored today.
    KEV status

    The KEV catalogue is a list maintained by the US authority CISA of vulnerabilities for which active exploitation in the wild has been confirmed. It answers not the question „how severe?“ but „is it already being attacked?“ — thereby sharply prioritising patching.

    Read in glossary
    —
    Published

    Detection rules

    No NEOSEC detection rule is available for this vulnerability yet.

    Classification under NIS2 and CRA

    Rule-based classification from exploitation status and severity. It does not replace a case-by-case assessment.

    NIS2

    NIS2 is EU Directive (EU) 2022/2555 to raise the level of cybersecurity across the Union. It substantially broadens obligations compared with the first NIS directive: more sectors, mandatory risk management, staged reporting duties and personal accountability of senior management.

    Read in glossary
    High technical severity: assess and remediate the vulnerability in vulnerability handling under Art. 21(2)(e) NIS2 and document the decision.
    CRA

    The CRA is EU Regulation (EU) 2024/2847 setting horizontal cybersecurity requirements for „products with digital elements“ — from industrial controllers and software to connected consumer devices. For the first time manufacturers must ensure security across the entire product lifecycle, handle vulnerabilities and provide security updates.

    Read in glossary
    From 11.12.2027, Annex I Part II CRA requires manufacturers of affected products with digital elements to handle vulnerabilities without delay and provide security updates.
    ISO/IEC 27001

    ISO/IEC 27001 is the internationally leading standard for an information security management system (ISMS). It describes a risk-based, process-oriented framework to systematically plan, implement, review and improve information security.

    Read in glossary
    Control A.8.8, management of technical vulnerabilities: assess relevance to your systems, plan remediation and keep evidence.

    Description

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_conn: Lock parent access during enhanced SCO setup Bluetooth: hci_conn: Lock parent access during enhanced SCO setup hci_enhanced_setup_sync() runs on the request workqueue without the hci_dev_lock held by its caller when setup was queued. Its CVSD capability check and find_next_esco_param() dereference conn->parent while the receive workqueue can unlink and release that parent. The following interleaving can cause a use-after-free: hci_enhanced_setup_sync() hci_disconn_complete_evt() load conn->parent hci_dev_lock() hci_conn_del(ACL parent) unlink SCO child drop link's parent reference clear child->parent release ACL parent bt_link_release() kfree(parent) hci_dev_unlock() read parent->features[0][3] The reference held for the queued SCO child does not keep its ACL parent alive after unlinking. Commit 42de40abe25d ("Bluetooth: hci_conn: fix the SCO setup context lifetime") protects the child stored in the queued context, but leaves these parent accesses unprotected. With a 40 ms diagnostic delay after loading conn->parent, an instrumented kernel based on fd179f8a05be, which already contains 42de40abe25d, BUG: KASAN: slab-use-after-free in hci_enhanced_setup_sync+0xda5/0xdf0 Read of size 1 at addr ffff888102204047 by task kworker/u17:0/93 Call Trace: hci_enhanced_setup_sync+0xda5/0xdf0 hci_cmd_sync_work+0x13c/0x290 process_one_work+0x6b4/0x10e0 Allocated by task 92: __hci_conn_add+0x304/0x1df0 hci_connect_acl+0x349/0x3e0 hci_connect_sco+0x3b/0x9a0 sco_sock_connect+0x475/0xca0 Freed by task 94: kfree+0x121/0x3c0 bt_link_release+0x79/0xa0 device_release+0xc8/0x240 kobject_put+0x14d/0x280 hci_conn_del+0x524/0xe30 hci_disconn_complete_evt+0x403/0x8c0 hci_event_packet+0x71b/0xb20 hci_rx_work+0x293/0x730 The accessed address is 71 bytes into the freed ACL parent, at its features[0][3] byte; the queued SCO child is a different object. The diagnostic preserves the loaded parent across the delay, matching the unmodified compiled capability check, and does not change the parent references or teardown path. Hold hci_dev_lock() across the codec switch, including every call to find_next_esco_param(), and release it on all selection errors. Keep configure_datapath_sync() outside the critical section because it waits for HCI events. Preserve parameter selection and existing return values.

    Source: Debian LTS Advisories, Microsoft Security Update Guide, cvelistv5, NVD (NIST), BSI WID Portal, BSI CSAF

    Affected products

    The following versions are affected. Older releases of the same product line are also vulnerable unless stated otherwise.

    Affected products
    Affected versionsFixed in
    LinuxLinux
    • 6.13 – < 6.18.56
    • 6.19 – < 7.2.10
    • 6.1 – < 6.1.191
    • 6.7 – < 6.12.113
    • —
    • 6.2 – < 6.6.160
    • 6.18.56
    • 7.2.10
    • 6.1.191
    • 6.12.113
    • 7.3
    • 6.6.160

    Vendors and products

    Affected operating systems

    Affected operating systems
    Linuxdebianlinux-6.12bookworm

    References & sources

    Changes to this CVE

    Who changed this CVE and when: NVD (analysis, affected products, CVSS), the CVE publisher (CNA) and additional providers such as CISA (ADP).

    1. Record modifiedLinux

      Show 2 original changes
      Individual changes of this event as published by NVD
      TypeActionBeforeAfter
      Affected versions (publisher)added
      —
      Affected value modified. <a href="https://github.com/CVEProject/cvelistV5/blob/main/cves/2026/98xxx/CVE-2026-98736.json">CVE-2026-98736</a>
      Referenceadded
      —
      https://git.kernel.org/stable/c/48bf3b94c7331e11eaa6c89adc054a7bc7c0382e

      Source identifier: 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    2. Record modifiedLinux

      Show 2 original changes
      Individual changes of this event as published by NVD
      TypeActionBeforeAfter
      Affected versions (publisher)added
      —
      Affected value modified. <a href="https://github.com/CVEProject/cvelistV5/blob/main/cves/2026/98xxx/CVE-2026-98736.json">CVE-2026-98736</a>
      Referenceadded
      —
      https://git.kernel.org/stable/c/70b55855eecb428d446344d827bda8725ce8b312

      Source identifier: 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    3. Record modifiedLinux

      1 individual change: Affected versions (publisher)

      Show the original change
      Individual changes of this event as published by NVD
      TypeActionBeforeAfter
      Affected versions (publisher)added
      —
      Affected value modified. <a href="https://github.com/CVEProject/cvelistV5/blob/main/cves/2026/98xxx/CVE-2026-98736.json">CVE-2026-98736</a>

      Source identifier: 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    4. ReceivedLinux

      Description added or changed

      Show 6 original changes
      Individual changes of this event as published by NVD
      TypeActionBeforeAfter
      Descriptionadded
      —
      In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_conn: Lock parent access during enhanced SCO setup Bluetooth: hci_conn: Lock parent access during enhanced SCO setup hci_enhanced_setup_sync() runs on the request workqueue without the hci_dev_lock held by its caller when setup was queued. Its CVSD capability check and find_next_esco_param() dereference conn->parent while the receive workqueue can unlink and release that parent. The following interleaving can cause a use-after-free: hci_enhanced_setup_sync() hci_disconn_complete_evt() load conn->parent hci_dev_lock() hci_conn_del(ACL parent) unlink SCO child drop link's parent reference clear child->parent release ACL parent bt_link_release() kfree(parent) hci_dev_unlock() read parent->features[0][3] The reference held for the queued SCO child does not keep its ACL parent alive after unlinking. Commit 42de40abe25d ("Bluetooth: hci_conn: fix the SCO setup context lifetime") protects the child stored in the queued context, but leaves these parent accesses unprotected. With a 40 ms diagnostic delay after loading conn->parent, an instrumented kernel based on fd179f8a05be, which already contains 42de40abe25d, BUG: KASAN: slab-use-after-free in hci_enhanced_setup_sync+0xda5/0xdf0 Read of size 1 at addr ffff888102204047 by task kworker/u17:0/93 Call Trace: hci_enhanced_setup_sync+0xda5/0xdf0 hci_cmd_sync_work+0x13c/0x290 process_one_work+0x6b4/0x10e0 Allocated by task 92: __hci_conn_add+0x304/0x1df0 hci_connect_acl+0x349/0x3e0 hci_connect_sco+0x3b/0x9a0 sco_sock_connect+0x475/0xca0 Freed by task 94: kfree+0x121/0x3c0 bt_link_release+0x79/0xa0 device_release+0xc8/0x240 kobject_put+0x14d/0x280 hci_conn_del+0x524/0xe30 hci_disconn_complete_evt+0x403/0x8c0 hci_event_packet+0x71b/0xb20 hci_rx_work+0x293/0x730 The accessed address is 71 bytes into the freed ACL parent, at its features[0][3] byte; the queued SCO child is a different object. The diagnostic preserves the loaded parent across the delay, matching the unmodified compiled capability check, and does not change the parent references or teardown path. Hold hci_dev_lock() across the codec switch, including every call to find_next_esco_param(), and release it on all selection errors. Keep configure_datapath_sync() outside the critical section because it waits for HCI events. Preserve parameter selection and existing return values.
      Affected versions (publisher)added
      —
      New affected value received. <a href="https://github.com/CVEProject/cvelistV5/blob/main/cves/2026/98xxx/CVE-2026-98736.json">CVE-2026-98736</a>
      Referenceadded
      —
      https://git.kernel.org/stable/c/024e05f73a4c1263d031614bc36700ec135eecb4
      Referenceadded
      —
      https://git.kernel.org/stable/c/1239ef0fa809b5952fca679db3faa3e1c00e1dac
      Referenceadded
      —
      https://git.kernel.org/stable/c/93a737e4e042f59673cd580d35214f278d7b757d
      Referenceadded
      —
      https://git.kernel.org/stable/c/cabd58d9bb66d49d481f762ce986173db397435d

      Source identifier: 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    Embed badge

    Show the severity and KEV status of this vulnerability on your site – with a link back here. The image is updated hourly.

    Badge preview for CVE-2026-98736
    <a href="https://intel.neosec.eu/en/cve/CVE-2026-98736"><img src="https://intel.neosec.eu/badge/cve/CVE-2026-98736.svg?lang=en" alt="CVE-2026-98736 – NEOSEC Intel" height="20"></a>