MediumCVE-2026-98588

    Linux Kernel: Out-of-Bounds Write (CVE-2026-98588)

    Published Last modified Sources: Debian LTS, Msrc Update Guide, CVE.org, BSI

    What is affected, what to do

    In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Reject max_entries > INT_MAX in sock_map_alloc sock_map_alloc() only rejects max_entries == 0 and otherwise allows any u32 value. sock_map_free() then walks the sks[] array with a signed int iterator: int i; for (i = 0; i < stab->map.max_entries; i++) struct sock **psk = &stab->sks[i]; When a SOCKMAP is created with max_entries = 0xffffffff (UINT_MAX), the allocation of 32 GiB can succeed on large-memory hosts. During free the counter reaches 0x80000000, wraps to INT_MIN, is sign-extended by movslq and turned into a ~16 GiB negative offset from stab->sks, pointing far below the allocation.

    Update Linux Kernel to version 5.15.222, Linux Kernel to version 6.1.189, Linux Kernel to version 6.6.158.

    Affected
    • Linux Kernel lt 5.11..5.15.222
    • Linux Kernel lt 5.16..6.1.189
    • Linux Kernel lt 6.2..6.6.158
    • Linux Kernel lt 6.7..6.12.112
    • Linux Kernel lt 6.13..6.18.55
    • Linux Kernel lt 6.19..7.2.9
    Fixed in
    • Linux Kernel 5.15.222
    • Linux Kernel 6.1.189
    • Linux Kernel 6.6.158
    • Linux Kernel 6.12.112
    • Linux Kernel 6.18.55
    • Linux Kernel 7.2.9
    • Linux Kernel 7.3

    Not sure whether and how you are affected? Ask a question about this vulnerability

    Metrics

    5.7

    Priority

    XIEM Effective CVSS: highest available CVSS rating from NVD and vendor data.

    Source: Vendor (CNA), CVSS v3

    5.7

    CVSS v3

    Severity Medium on the scale from 0 to 10.

    Source: Debian LTS, Msrc Update Guide, CVE.org, BSI

    0.2 %

    EPSS score

    Low — model estimates < 1% exploitation likelihood.

    Source: FIRST EPSS, percentile 11.4

    Show all metrics
    Severity
    Medium
    Priority (0–325)

    The priority score is a consolidated metric that condenses several individual signals into a single, action-guiding ranking: technical severity (CVSS), exploitation likelihood (EPSS), known-exploited status (KEV) and the context of the affected asset. The aim is to answer the only truly important question in vulnerability management: what first?

    Read in glossary
    59.54 Methodology
    Exploit maturity

    An exploit is code or a technique that specifically uses a concrete vulnerability to force unintended behaviour — such as executing code or escalating privileges. It is the tool that turns a theoretical flaw into a practical attack.

    Read in glossary
    no public PoC known
    XIEM Effective CVSS

    XIEM® is the tiered managed-security operating model from NEOSEC and a registered trademark of NEOSEC GmbH. It extends classic SIEM — the central collection, normalisation and correlation of security-relevant events — with endpoint forensics, network visibility and deception technology, and consolidates them into three building tiers: Sentry, Orchestrate and Command.

    Read in glossary
    5.7 Methodology
    CVSS v3

    CVSS is the globally established, open standard for assessing the technical severity of a vulnerability on a scale from 0 to 10. It describes how easily a flaw can be exploited and what damage it can cause — but not how likely its actual exploitation is. CVSS and the complementary EPSS deliberately answer different questions.

    Read in glossary
    5.7
    EPSS score

    The EPSS score is the absolute model output for an individual vulnerability: the estimated probability of real-world exploitation within the next 30 days, expressed as a value between 0 and 1 (i.e. 0 % to 100 %). A score of 0.42 means „the model estimates a 42 % chance of real-world exploitation within 30 days“.

    Read in glossary
    0.2 %
    Low — model estimates < 1% exploitation likelihood.
    EPSS percentile

    The EPSS percentile is the relative position of a vulnerability within all EPSS-scored CVEs, expressed as a value between 0 and 1. A percentile of 0.90 means „this CVE has a higher EPSS score than 90 % of all other scored CVEs“. Unlike the EPSS score, it is not a probability — but a positioning within a ranking.

    Read in glossary
    11.4
    Elevated — this CVE ranks above at least 10% of all CVEs scored today.
    KEV status

    The KEV catalogue is a list maintained by the US authority CISA of vulnerabilities for which active exploitation in the wild has been confirmed. It answers not the question „how severe?“ but „is it already being attacked?“ — thereby sharply prioritising patching.

    Read in glossary
    —
    Published

    Detection rules

    No NEOSEC detection rule is available for this vulnerability yet.

    Classification under NIS2 and CRA

    Rule-based classification from exploitation status and severity. It does not replace a case-by-case assessment.

    NIS2

    NIS2 is EU Directive (EU) 2022/2555 to raise the level of cybersecurity across the Union. It substantially broadens obligations compared with the first NIS directive: more sectors, mandatory risk management, staged reporting duties and personal accountability of senior management.

    Read in glossary
    Handle the vulnerability in regular vulnerability handling under Art. 21(2)(e) NIS2.
    CRA

    The CRA is EU Regulation (EU) 2024/2847 setting horizontal cybersecurity requirements for „products with digital elements“ — from industrial controllers and software to connected consumer devices. For the first time manufacturers must ensure security across the entire product lifecycle, handle vulnerabilities and provide security updates.

    Read in glossary
    From 11.12.2027, Annex I Part II CRA requires manufacturers of affected products with digital elements to handle vulnerabilities without delay and provide security updates.
    ISO/IEC 27001

    ISO/IEC 27001 is the internationally leading standard for an information security management system (ISMS). It describes a risk-based, process-oriented framework to systematically plan, implement, review and improve information security.

    Read in glossary
    Control A.8.8, management of technical vulnerabilities: assess relevance to your systems, plan remediation and keep evidence.

    Description

    In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Reject max_entries > INT_MAX in sock_map_alloc sock_map_alloc() only rejects max_entries == 0 and otherwise allows any u32 value. sock_map_free() then walks the sks[] array with a signed int iterator: int i; for (i = 0; i < stab->map.max_entries; i++) struct sock **psk = &stab->sks[i]; When a SOCKMAP is created with max_entries = 0xffffffff (UINT_MAX), the allocation of 32 GiB can succeed on large-memory hosts. During free the counter reaches 0x80000000, wraps to INT_MIN, is sign-extended by movslq and turned into a ~16 GiB negative offset from stab->sks, pointing far below the allocation. The faulting access is an xchg() write in sock_map_free(). Without KASAN, the same out-of-bounds write can fault on an unmapped vmalloc page or corrupt an unrelated allocation if that vmalloc address is populated. On a KASAN kernel with CONFIG_KASAN_VMALLOC=y, the shadow check for that address hits an unmapped shadow page and oopses first: BUG: unable to handle page fault for address: fffff521b59c5a00 RIP: 0010:kasan_check_range+0x107/0x190 Call Trace: sock_map_free+0x93/0x190 map_create+0x68d/0xb30 __sys_bpf+0x21e/0x2e70 Vmcore confirmed stab->map.max_entries == 0xffffffff, stab->sks == 0xffffc911ace2d000, and the faulting address sks + (s64)INT_MIN * 8 exactly at 0xffffc90dace2d000. The same buggy path is reached on the normal close()/bpf_map_free_deferred() path whenever such a map is destroyed. sock_map_alloc() used to bound its allocation size through bpf_map_charge_init(), but the bound was dropped when rlimit-based memory accounting was removed. Reject max_entries > INT_MAX at creation time so the signed iterator in sock_map_free() never sees a value that would overflow. Triggered by syzkaller and reproduced on both a 6.6-based KASAN kernel and the upstream v7.3-rc2 kernel.

    Source: Debian LTS Advisories, Microsoft Security Update Guide, cvelistv5, NVD (NIST), BSI WID Portal, BSI CSAF

    Affected products

    The following versions are affected. Older releases of the same product line are also vulnerable unless stated otherwise.

    Affected products
    Affected versionsFixed in
    LinuxLinux
    • 5.16 – < 6.1.189
    • 6.13 – < 6.18.55
    • 6.2 – < 6.6.158
    • —
    • 6.7 – < 6.12.112
    • 5.11 – < 5.15.222
    • 6.19 – < 7.2.9
    • 6.1.189
    • 6.18.55
    • 6.6.158
    • 7.3
    • 6.12.112
    • 5.15.222
    • 7.2.9

    Vendors and products

    Affected operating systems

    Affected operating systems
    Linuxdebianlinux-6.12bookworm

    References & sources

    Changes to this CVE

    Who changed this CVE and when: NVD (analysis, affected products, CVSS), the CVE publisher (CNA) and additional providers such as CISA (ADP).

    1. Record modifiedLinux

      1 individual change: Affected versions (publisher)

      Show the original change
      Individual changes of this event as published by NVD
      TypeActionBeforeAfter
      Affected versions (publisher)added
      —
      Affected value modified. <a href="https://github.com/CVEProject/cvelistV5/blob/main/cves/2026/98xxx/CVE-2026-98588.json">CVE-2026-98588</a>

      Source identifier: 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    2. ReceivedLinux

      Description added or changed

      Show 9 original changes
      Individual changes of this event as published by NVD
      TypeActionBeforeAfter
      Descriptionadded
      —
      In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Reject max_entries > INT_MAX in sock_map_alloc sock_map_alloc() only rejects max_entries == 0 and otherwise allows any u32 value. sock_map_free() then walks the sks[] array with a signed int iterator: int i; for (i = 0; i < stab->map.max_entries; i++) struct sock **psk = &stab->sks[i]; When a SOCKMAP is created with max_entries = 0xffffffff (UINT_MAX), the allocation of 32 GiB can succeed on large-memory hosts. During free the counter reaches 0x80000000, wraps to INT_MIN, is sign-extended by movslq and turned into a ~16 GiB negative offset from stab->sks, pointing far below the allocation. The faulting access is an xchg() write in sock_map_free(). Without KASAN, the same out-of-bounds write can fault on an unmapped vmalloc page or corrupt an unrelated allocation if that vmalloc address is populated. On a KASAN kernel with CONFIG_KASAN_VMALLOC=y, the shadow check for that address hits an unmapped shadow page and oopses first: BUG: unable to handle page fault for address: fffff521b59c5a00 RIP: 0010:kasan_check_range+0x107/0x190 Call Trace: sock_map_free+0x93/0x190 map_create+0x68d/0xb30 __sys_bpf+0x21e/0x2e70 Vmcore confirmed stab->map.max_entries == 0xffffffff, stab->sks == 0xffffc911ace2d000, and the faulting address sks + (s64)INT_MIN * 8 exactly at 0xffffc90dace2d000. The same buggy path is reached on the normal close()/bpf_map_free_deferred() path whenever such a map is destroyed. sock_map_alloc() used to bound its allocation size through bpf_map_charge_init(), but the bound was dropped when rlimit-based memory accounting was removed. Reject max_entries > INT_MAX at creation time so the signed iterator in sock_map_free() never sees a value that would overflow. Triggered by syzkaller and reproduced on both a 6.6-based KASAN kernel and the upstream v7.3-rc2 kernel.
      Affected versions (publisher)added
      —
      New affected value received. <a href="https://github.com/CVEProject/cvelistV5/blob/main/cves/2026/98xxx/CVE-2026-98588.json">CVE-2026-98588</a>
      Referenceadded
      —
      https://git.kernel.org/stable/c/814a81c842bd88f6bd8a4ce550d560df071a5d03
      Referenceadded
      —
      https://git.kernel.org/stable/c/909f761868fda329dc69130ef9eb5b5795bcdf00
      Referenceadded
      —
      https://git.kernel.org/stable/c/ba7d627dbc67d62df2fa66d7b41e743c3ace0ec8
      Referenceadded
      —
      https://git.kernel.org/stable/c/c56191af3a578b9cc265fa3bd5fc0752c59c1781
      Referenceadded
      —
      https://git.kernel.org/stable/c/cc70972ddbf0e3398f2f32624d31db78594d50d8
      Referenceadded
      —
      https://git.kernel.org/stable/c/cea597519b9ca6d691c98d92460ead8ece2a07af
      Referenceadded
      —
      https://git.kernel.org/stable/c/f4a73f49e256bd835368504462be3b57b03febff

      Source identifier: 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    Embed badge

    Show the severity and KEV status of this vulnerability on your site – with a link back here. The image is updated hourly.

    Badge preview for CVE-2026-98588
    <a href="https://intel.neosec.eu/en/cve/CVE-2026-98588"><img src="https://intel.neosec.eu/badge/cve/CVE-2026-98588.svg?lang=en" alt="CVE-2026-98588 – NEOSEC Intel" height="20"></a>