Back to overview

    The wireless HDMI cable with CVSS 9.2: why the device behind the screen belongs on your inventory

    A Barco ClickShare – the wireless presentation button, the “HDMI cable without the copper” – counts as a computer to no one. Since 30 October it demonstrably is one: Barco confirms the base units are affected by PHP2Shell, two PHP flaws rated CVSS 9.2 with unauthenticated code execution. The real point is not the patch but the question behind it: is this device – and every other one behind the screen – on your inventory? You can’t protect what you don’t know you have.

    Published by NEOSEC
    Asset-ManagementCMDBSchatten-ITIoTBarco ClickSharePHP2ShellAV-TechnikSegmentierungSichtbarkeitXIEMNIS2KRITIS
    Share

    As of 18 November 2026.

    Few devices in working life are more inconspicuous than these little Barco ClickShare buttons. Anyone who regularly presents at other locations knows them: one part plugs into the laptop’s USB or USB-C port, you press the big button, and the presentation appears wirelessly on the screen – thanks to a base unit mounted behind the monitor. An “HDMI cable without the copper”, wireless. For years such devices were treated, security-wise, exactly like that: like a cable. No item in the CMDB, no patch cycle, no attention.

    Until 30 October 2026 that was a defensible stance. Not any more. Barco has confirmed that the base units of an entire product range are affected by PHP2Shell – two critical PHP vulnerabilities rated CVSS 9.2 that allow unauthenticated code execution. The “cable” is a small Linux computer with a web server, and it sits on your network.

    What happened

    The ClickShare base unit runs a PHP-based Web Configurator – the web interface for setting it up. That is exactly where PHP2Shell bites: the two flaws CVE-2026-109618 (memory corruption in out-of-memory handling) and CVE-2026-109619 (stale global state) in the PHP interpreter itself, both CVSS 4.0 = 9.2, both exploitable without authentication or user interaction. The vulnerable code paths reach back to PHP 5.4 from 2012; PHP patched on 21 October with 8.5.12, 8.4.27, 8.3.36 and 8.2.35. CISA added both to the KEV catalogue on 26 October, an Exploit-DB entry appeared one day after disclosure, and several threat-intelligence teams report broad active exploitation.

    For ClickShare this means: anyone who can reach the configuration interface of an affected base unit – over the corporate network or over the Wi-Fi the device itself broadcasts – can run code on it. According to Barco, affected ranges include the C, CX, Bar, CS(E) and CSC/CSM series as well as older wePresent models. For the C, CX and Bar series a hotfix (v2.27.01.0009) is available via XMS Cloud and for download.

    The real lesson is not in the advisory

    PHP2Shell is the occasion, not the subject. The subject is a sentence you hear constantly in OT security and happily forget in office IT: you can’t protect what you don’t know you have. A current, complete asset inventory is the first step in vulnerability management – and the honest question is: are you really sure that every device on your network is captured?

    The ClickShare base unit is the textbook example of the device that slips through:

    • It is installed by facilities or the AV company, not by IT.
    • It sits behind the screen – physically invisible.
    • It counts as an “accessory”, not a computer, and so ends up in no CMDB.
    • It often broadcasts its own Wi-Fi, creating a second, unmonitored access layer.
    • And it does not update itself: a device sitting in a cupboard, or in a rarely used meeting room with no internet connection, never receives the hotfix – unless someone knows it exists.

    The problem is not ClickShare. The problem is the whole class of invisible appliances: meeting-room kit, label and badge printers, IP cameras, door openers and access readers, KVM switches, building automation, UPS management cards, digital signage. Each is a small Linux computer with a web interface, often not updated for years, and each expands your attack surface by an item that appears on no inventory list.

    What to do now

    1. Find and patch ClickShare base units. Do not rely on the CMDB – search the network actively. For the C/CX/Bar series apply hotfix v2.27.01.0009 (XMS Cloud or download); for the other ranges follow the Barco knowledge base. Collect devices “in the cupboard” and update them before their next use.
    2. Restrict Configurator access. In the settings disable the “ClickShare Configurator available via Wi-Fi” option, and limit access to the interface via firewall and segmentation.
    3. Check the inventory against reality. A network scan (nmap, or passively via NetFlow) finds devices missing from the CMDB. Every web interface, every open port with no known asset behind it, is a finding. This is not a one-off project but a recurring reconciliation.
    4. Segment AV and IoT kit. Meeting-room devices belong in their own segment with no path into the corporate network – like guest and BYOD devices. Then a vulnerable ClickShare is not a stepping stone.
    5. Make it visible in XIEM. These devices do not update themselves and rarely report anything. What remains is the outside and network-edge view: unexpected web interfaces at the perimeter, outbound connections from a “cable”, scanner activity against the Configurator port.

    Context

    For entities subject to NIS2 this is an Article 21 matter: asset management and network security are mandatory measures, and a risk management that overlooks meeting-room technology is incomplete. The appeal of this case lies in how mundane the device is – a presentation button nobody thinks about. Those are exactly the devices you find again, in the next forensic investigation, as the point of entry.

    Or, as the colleague who flagged the Barco notice put it: maybe next time reach for the good old copper HDMI cable after all.

    Sources

    Affected products