CriticalCVE-2026-89495

    Linux Kernel: Out-of-Bounds Write (CVE-2026-89495)

    Published Last modified Sources: Debian LTS, Debian, CVE.org, BSI

    What is affected, what to do

    In the Linux kernel, the following vulnerability has been resolved: ocfs2: bound namelen in dlm_migrate_request_handler Patch series "ocfs2/dlm: bound peer-controlled lengths in the o2dlm". The o2dlm receive handlers trust u8 length and count fields from the wire without bounding them, so a node in a DLM domain can corrupt or panic any other node with a malformed message.

    Update Linux Kernel to version 5.10.270, Linux Kernel to version 5.15.221, Linux Kernel to version 6.1.188.

    Affected
    • Linux Kernel lt 2.6.16..5.10.270
    • Linux Kernel lt 5.11..5.15.221
    • Linux Kernel lt 5.16..6.1.188
    • Linux Kernel lt 6.2..6.6.157
    • Linux Kernel lt 6.7..6.12.109
    • Linux Kernel lt 6.13..6.18.50
    • Linux Kernel lt 6.19..7.2.4
    Fixed in
    • Linux Kernel 5.10.270
    • Linux Kernel 5.15.221
    • Linux Kernel 6.1.188
    • Linux Kernel 6.6.157
    • Linux Kernel 6.12.109
    • Linux Kernel 6.18.50
    • Linux Kernel 7.2.4
    • Linux Kernel 7.3

    Not sure whether and how you are affected? Ask a question about this vulnerability

    Metrics

    9.8

    Priority

    XIEM Effective CVSS: highest available CVSS rating from NVD and vendor data.

    Source: Vendor (CNA), CVSS v3

    9.8

    CVSS v3

    Severity Critical on the scale from 0 to 10.

    Source: Debian LTS, Debian, CVE.org, BSI

    0.7 %

    EPSS score

    Low — model estimates < 1% exploitation likelihood.

    Source: FIRST EPSS, percentile 53.4

    Show all metrics
    Severity
    Critical
    Priority (0–325)

    The priority score is a consolidated metric that condenses several individual signals into a single, action-guiding ranking: technical severity (CVSS), exploitation likelihood (EPSS), known-exploited status (KEV) and the context of the affected asset. The aim is to answer the only truly important question in vulnerability management: what first?

    Read in glossary
    98.79 Methodology
    Exploit maturity

    An exploit is code or a technique that specifically uses a concrete vulnerability to force unintended behaviour — such as executing code or escalating privileges. It is the tool that turns a theoretical flaw into a practical attack.

    Read in glossary
    no public PoC known
    XIEM Effective CVSS

    XIEM® is the tiered managed-security operating model from NEOSEC and a registered trademark of NEOSEC GmbH. It extends classic SIEM — the central collection, normalisation and correlation of security-relevant events — with endpoint forensics, network visibility and deception technology, and consolidates them into three building tiers: Sentry, Orchestrate and Command.

    Read in glossary
    9.8 Methodology
    CVSS v3

    CVSS is the globally established, open standard for assessing the technical severity of a vulnerability on a scale from 0 to 10. It describes how easily a flaw can be exploited and what damage it can cause — but not how likely its actual exploitation is. CVSS and the complementary EPSS deliberately answer different questions.

    Read in glossary
    9.8
    EPSS score

    The EPSS score is the absolute model output for an individual vulnerability: the estimated probability of real-world exploitation within the next 30 days, expressed as a value between 0 and 1 (i.e. 0 % to 100 %). A score of 0.42 means „the model estimates a 42 % chance of real-world exploitation within 30 days“.

    Read in glossary
    0.7 %
    Low — model estimates < 1% exploitation likelihood.
    EPSS percentile

    The EPSS percentile is the relative position of a vulnerability within all EPSS-scored CVEs, expressed as a value between 0 and 1. A percentile of 0.90 means „this CVE has a higher EPSS score than 90 % of all other scored CVEs“. Unlike the EPSS score, it is not a probability — but a positioning within a ranking.

    Read in glossary
    53.4
    High — this CVE ranks above the median of all CVEs scored today (rank ≥ 36%).
    KEV status

    The KEV catalogue is a list maintained by the US authority CISA of vulnerabilities for which active exploitation in the wild has been confirmed. It answers not the question „how severe?“ but „is it already being attacked?“ — thereby sharply prioritising patching.

    Read in glossary
    —
    Published

    Detection rules

    No NEOSEC detection rule is available for this vulnerability yet.

    Classification under NIS2 and CRA

    Rule-based classification from exploitation status and severity. It does not replace a case-by-case assessment.

    NIS2

    NIS2 is EU Directive (EU) 2022/2555 to raise the level of cybersecurity across the Union. It substantially broadens obligations compared with the first NIS directive: more sectors, mandatory risk management, staged reporting duties and personal accountability of senior management.

    Read in glossary
    High technical severity: assess and remediate the vulnerability in vulnerability handling under Art. 21(2)(e) NIS2 and document the decision.
    CRA

    The CRA is EU Regulation (EU) 2024/2847 setting horizontal cybersecurity requirements for „products with digital elements“ — from industrial controllers and software to connected consumer devices. For the first time manufacturers must ensure security across the entire product lifecycle, handle vulnerabilities and provide security updates.

    Read in glossary
    From 11.12.2027, Annex I Part II CRA requires manufacturers of affected products with digital elements to handle vulnerabilities without delay and provide security updates.
    ISO/IEC 27001

    ISO/IEC 27001 is the internationally leading standard for an information security management system (ISMS). It describes a risk-based, process-oriented framework to systematically plan, implement, review and improve information security.

    Read in glossary
    Control A.8.8, management of technical vulnerabilities: assess relevance to your systems, plan remediation and keep evidence.

    Description

    In the Linux kernel, the following vulnerability has been resolved: ocfs2: bound namelen in dlm_migrate_request_handler Patch series "ocfs2/dlm: bound peer-controlled lengths in the o2dlm". The o2dlm receive handlers trust u8 length and count fields from the wire without bounding them, so a node in a DLM domain can corrupt or panic any other node with a malformed message. Three defects: - dlm_migrate_request_handler() passes migrate->namelen unchecked to dlm_init_mle(), which memcpy()s it into the 32-byte mname[] of an o2dlm_mle slab object: a heap out-of-bounds write of up to ~215 attacker-controlled bytes. - dlm_mig_lockres_handler() passes mres->lockname_len unchecked to dlm_init_lockres(), which memcpy()s it into the 32-byte o2dlm_lockname slab object: a heap out-of-bounds write of up to ~223 bytes. - the same handler trusts mres->num_locks without checking that the message is large enough to hold that many entries, so dlm_process_recovery_data() walks mres->ml[] past the kmalloc(data_len) copy and trips a BUG_ON (an out-of-bounds read ending in a panic). The other o2dlm receive handlers already reject an oversized name; the migration and recovery handlers have omitted it since the DLM was added (see the Fixes tags). Patch 1 bounds namelen; patch 2 validates lockname_len, num_locks, and the payload size. Conforming recovery and migration traffic is unaffected. o2net authenticates peers only by the DLM domain key, so any node that has joined the domain -- including a compromised or malicious member -- can send these messages. There is no local trigger; the attacker must already be a member of the cluster. Each sink was confirmed under KASAN with an out-of-tree module mirroring it exactly -- a kmem_cache/kmalloc of the real destination size, then the same unclamped memcpy/loop: slab-out-of-bounds Write for the two writes, Read for the recovery walk, and a panic. A userspace AddressSanitizer build faults identically under -m32 and -m64. Scrubbed logs are available on request. I reported this privately to security@kernel.org and the ocfs2 maintainers on 2026-06-20; with no response after the standard embargo period I am posting the fix publicly. I have no embargo requirement. This patch (of 2): A node receiving a DLM_MIGRATE_REQUEST message trusts the peer-supplied name length (migrate->namelen) without bounding it. dlm_init_mle() then copies that many bytes into the fixed DLM_LOCKID_NAME_MAX-byte mname[] array of an o2dlm_mle slab object, so a malformed message from a cluster peer overflows the slab object by up to ~215 bytes: a heap out-of-bounds write of attacker-controlled data, reachable by any node in the domain. Reject an oversized name, the way dlm_master_request_handler() and the other o2dlm receive handlers already do; the migration handler omits the check entirely. Conforming messages are unaffected.

    Source: Debian LTS Advisories, Debian Security Advisories, NVD (NIST), cvelistv5, BSI WID Portal, BSI CSAF

    Affected products

    The following versions are affected. Older releases of the same product line are also vulnerable unless stated otherwise.

    Affected products
    Affected versionsFixed in
    LinuxLinux
    • 2.6.16 – < 5.10.270
    • 5.11 – < 5.15.221
    • —
    • 5.16 – < 6.1.188
    • 6.2 – < 6.6.157
    • 6.13 – < 6.18.50
    • 6.19 – < 7.2.4
    • 6.7 – < 6.12.109
    • 5.10.270
    • 5.15.221
    • 7.3
    • 6.1.188
    • 6.6.157
    • 6.18.50
    • 7.2.4
    • 6.12.109

    Vendors and products

    Affected operating systems

    Affected operating systems
    Linuxdebianlinuxbookworm
    Linuxdebianlinuxtrixie
    Linuxdebianlinux-6.12bookworm

    References & sources

    Changes to this CVE

    Who changed this CVE and when: NVD (analysis, affected products, CVSS), the CVE publisher (CNA) and additional providers such as CISA (ADP).

    1. Record modifiedLinux

      1 individual change: Affected versions (publisher)

      Show the original change
      Individual changes of this event as published by NVD
      TypeActionBeforeAfter
      Affected versions (publisher)added
      —
      Affected value modified. <a href="https://github.com/CVEProject/cvelistV5/blob/main/cves/2026/89xxx/CVE-2026-89495.json">CVE-2026-89495</a>

      Source identifier: 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    2. Record modifiedLinux

      Show 5 original changes
      Individual changes of this event as published by NVD
      TypeActionBeforeAfter
      Affected versions (publisher)added
      —
      Affected value modified. <a href="https://github.com/CVEProject/cvelistV5/blob/main/cves/2026/89xxx/CVE-2026-89495.json">CVE-2026-89495</a>
      Referenceadded
      —
      https://git.kernel.org/stable/c/006c96ea488eca2ef5155ec76038e0a4dbf65f0a
      Referenceadded
      —
      https://git.kernel.org/stable/c/24989909d3413b44b104102caa6661b1e424ba0f
      Referenceadded
      —
      https://git.kernel.org/stable/c/aabc5d8388e6f8826345f0073455dbcaaaa6491d
      Referenceadded
      —
      https://git.kernel.org/stable/c/e1288865b8ceac0dcd1009ecba43de961f13d5bd

      Source identifier: 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    3. Record modifiedLinux

      CVSS V3.1: AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

      Show the original change
      Individual changes of this event as published by NVD
      TypeActionBeforeAfter
      CVSSadded
      —
      AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

      Source identifier: 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    4. ReceivedLinux

      Description added or changed

      Show 6 original changes
      Individual changes of this event as published by NVD
      TypeActionBeforeAfter
      Descriptionadded
      —
      In the Linux kernel, the following vulnerability has been resolved: ocfs2: bound namelen in dlm_migrate_request_handler Patch series "ocfs2/dlm: bound peer-controlled lengths in the o2dlm". The o2dlm receive handlers trust u8 length and count fields from the wire without bounding them, so a node in a DLM domain can corrupt or panic any other node with a malformed message. Three defects: - dlm_migrate_request_handler() passes migrate->namelen unchecked to dlm_init_mle(), which memcpy()s it into the 32-byte mname[] of an o2dlm_mle slab object: a heap out-of-bounds write of up to ~215 attacker-controlled bytes. - dlm_mig_lockres_handler() passes mres->lockname_len unchecked to dlm_init_lockres(), which memcpy()s it into the 32-byte o2dlm_lockname slab object: a heap out-of-bounds write of up to ~223 bytes. - the same handler trusts mres->num_locks without checking that the message is large enough to hold that many entries, so dlm_process_recovery_data() walks mres->ml[] past the kmalloc(data_len) copy and trips a BUG_ON (an out-of-bounds read ending in a panic). The other o2dlm receive handlers already reject an oversized name; the migration and recovery handlers have omitted it since the DLM was added (see the Fixes tags). Patch 1 bounds namelen; patch 2 validates lockname_len, num_locks, and the payload size. Conforming recovery and migration traffic is unaffected. o2net authenticates peers only by the DLM domain key, so any node that has joined the domain -- including a compromised or malicious member -- can send these messages. There is no local trigger; the attacker must already be a member of the cluster. Each sink was confirmed under KASAN with an out-of-tree module mirroring it exactly -- a kmem_cache/kmalloc of the real destination size, then the same unclamped memcpy/loop: slab-out-of-bounds Write for the two writes, Read for the recovery walk, and a panic. A userspace AddressSanitizer build faults identically under -m32 and -m64. Scrubbed logs are available on request. I reported this privately to security@kernel.org and the ocfs2 maintainers on 2026-06-20; with no response after the standard embargo period I am posting the fix publicly. I have no embargo requirement. This patch (of 2): A node receiving a DLM_MIGRATE_REQUEST message trusts the peer-supplied name length (migrate->namelen) without bounding it. dlm_init_mle() then copies that many bytes into the fixed DLM_LOCKID_NAME_MAX-byte mname[] array of an o2dlm_mle slab object, so a malformed message from a cluster peer overflows the slab object by up to ~215 bytes: a heap out-of-bounds write of attacker-controlled data, reachable by any node in the domain. Reject an oversized name, the way dlm_master_request_handler() and the other o2dlm receive handlers already do; the migration handler omits the check entirely. Conforming messages are unaffected.
      Affected versions (publisher)added
      —
      New affected value received. <a href="https://github.com/CVEProject/cvelistV5/blob/main/cves/2026/89xxx/CVE-2026-89495.json">CVE-2026-89495</a>
      Referenceadded
      —
      https://git.kernel.org/stable/c/2487bea2098322669f0563baff53e797486b823f
      Referenceadded
      —
      https://git.kernel.org/stable/c/de10cd3b062a5235af754925fcf49beb5a1109d4
      Referenceadded
      —
      https://git.kernel.org/stable/c/ea5b5609305a8437bc955a0834a530c12246d78f
      Referenceadded
      —
      https://git.kernel.org/stable/c/f8658ee3327f73bd81c0bcd07cdeb5a8527fac98

      Source identifier: 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    Embed badge

    Show the severity and KEV status of this vulnerability on your site – with a link back here. The image is updated hourly.

    Badge preview for CVE-2026-89495
    <a href="https://intel.neosec.eu/en/cve/CVE-2026-89495"><img src="https://intel.neosec.eu/badge/cve/CVE-2026-89495.svg?lang=en" alt="CVE-2026-89495 – NEOSEC Intel" height="20"></a>