MediumCVE-2026-80861

    Linux Kernel: security vulnerability (CVE-2026-80861)

    Published Last modified Sources: HKCERT, Ubuntu, Debian LTS, Debian, EUVD, CVE.org, Msrc Update Guide, BSI

    Share

    What is affected, what to do

    In the Linux kernel, the following vulnerability has been resolved: usb: xhci: bail out of setup if the controller is inaccessible xhci_gen_setup() locates the operational registers using the capability length read from the very first register: xhci->op_regs = hcd->regs + HC_LENGTH(readl(&xhci->cap_regs->hc_capbase)); If the controller is dead or has dropped off the bus, that read returns ~0, HC_LENGTH() truncates it to 0xff, and op_regs ends up 0xff bytes past the page-aligned MMIO base, i.e. unaligned. The first access through it, xhci_halt() -> xhci_handshake() reading op_regs->status, is then an unaligned readl() on device memory. arm64 faults on unaligned device accesses, so instead of xhci_handshake() catching the all-ones value and returning -ENODEV, setup oopses: xhci-pci-renesas 0005:08:00.0: Unable to change power state from D3cold to D0, device inaccessible xhci-pci-renesas 0005:08:00.0: xHCI Host Controller xhci-pci-renesas 0005:08:00.0: new USB bus registered, assigned bus number 1 Unable to handle kernel paging request at virtual address ffff80030a770103 ESR = 0x0000000096000021 FSC = 0x21: alignment fault Internal error: Oops: 0000000096000021 [#1] SMP pc : xhci_halt [xhci_hcd] Call trace: xhci_halt xhci_gen_setup xhci_pci_setup usb_add_hcd usb_hcd_pci_probe xhci_pci_common_probe xhci_pci_renesas_probe This was hit with a Renesas uPD720201 that failed to power up ("Unable to change power state from D3cold to D0, device inaccessible") yet still reached the HCD probe path.

    Update Linux Kernel to version 5.10.273, Linux Kernel to version 5.15.224, Linux Kernel to version 6.1.191.

    Affected
    • Linux Kernel lt 2.6.31..5.10.273
    • Linux Kernel lt 5.11..5.15.224
    • Linux Kernel lt 5.16..6.1.191
    • Linux Kernel lt 6.2..6.6.158
    • Linux Kernel lt 6.7..6.12.111
    • Linux Kernel lt 6.13..6.18.51
    • Linux Kernel lt 6.19..7.1.13
    • Linux Kernel lt 7.2..7.2.3
    Fixed in
    • Linux Kernel 5.10.273
    • Linux Kernel 5.15.224
    • Linux Kernel 6.1.191
    • Linux Kernel 6.6.158
    • Linux Kernel 6.12.111
    • Linux Kernel 6.18.51
    • Linux Kernel 7.1.13
    • Linux Kernel 7.2.3
    • Linux Kernel 7.3

    Not sure whether and how you are affected? Ask a question about this vulnerability

    Metrics

    4.2

    XIEM Effective CVSS

    Highest available CVSS rating from NVD and vendor data.

    Source: Vendor (CNA), CVSS v3

    4.2

    CVSS v3

    Severity Medium on the scale from 0 to 10.

    Source: HKCERT, Ubuntu, Debian LTS, Debian, EUVD, CVE.org, Msrc Update Guide, BSI

    0.2 %

    EPSS score

    Low — model estimates < 1% exploitation likelihood.

    Source: FIRST EPSS, percentile 7.9

    Show all metrics
    Severity
    Medium
    Priority (0–325)

    The priority score is a consolidated metric that condenses several individual signals into a single, action-guiding ranking: technical severity (CVSS), exploitation likelihood (EPSS), known-exploited status (KEV) and the context of the affected asset. The aim is to answer the only truly important question in vulnerability management: what first?

    Read in glossary
    45.36 Methodology
    Exploit maturity

    An exploit is code or a technique that specifically uses a concrete vulnerability to force unintended behaviour — such as executing code or escalating privileges. It is the tool that turns a theoretical flaw into a practical attack.

    Read in glossary
    no public PoC known
    XIEM Effective CVSS

    XIEM® is the tiered managed-security operating model from NEOSEC and a registered trademark of NEOSEC GmbH. It extends classic SIEM — the central collection, normalisation and correlation of security-relevant events — with endpoint forensics, network visibility and deception technology, and consolidates them into three building tiers: Sentry, Orchestrate and Command.

    Read in glossary
    4.2 Methodology
    CVSS v3

    CVSS is the globally established, open standard for assessing the technical severity of a vulnerability on a scale from 0 to 10. It describes how easily a flaw can be exploited and what damage it can cause — but not how likely its actual exploitation is. CVSS and the complementary EPSS deliberately answer different questions.

    Read in glossary
    4.2
    EPSS score

    The EPSS score is the absolute model output for an individual vulnerability: the estimated probability of real-world exploitation within the next 30 days, expressed as a value between 0 and 1 (i.e. 0 % to 100 %). A score of 0.42 means „the model estimates a 42 % chance of real-world exploitation within 30 days“.

    Read in glossary
    0.2 %
    Low — model estimates < 1% exploitation likelihood.
    EPSS percentile

    The EPSS percentile is the relative position of a vulnerability within all EPSS-scored CVEs, expressed as a value between 0 and 1. A percentile of 0.90 means „this CVE has a higher EPSS score than 90 % of all other scored CVEs“. Unlike the EPSS score, it is not a probability — but a positioning within a ranking.

    Read in glossary
    7.9
    Low — this CVE sits in the lower 10% of all CVEs scored today.
    KEV status

    The KEV catalogue is a list maintained by the US authority CISA of vulnerabilities for which active exploitation in the wild has been confirmed. It answers not the question „how severe?“ but „is it already being attacked?“ — thereby sharply prioritising patching.

    Read in glossary
    —
    Published

    Detection rules

    No NEOSEC detection rule is available for this vulnerability yet.

    Classification under NIS2 and CRA

    Rule-based classification from exploitation status and severity. It does not replace a case-by-case assessment.

    NIS2

    NIS2 is EU Directive (EU) 2022/2555 to raise the level of cybersecurity across the Union. It substantially broadens obligations compared with the first NIS directive: more sectors, mandatory risk management, staged reporting duties and personal accountability of senior management.

    Read in glossary
    Handle the vulnerability in regular vulnerability handling under Art. 21(2)(e) NIS2.
    CRA

    The CRA is EU Regulation (EU) 2024/2847 setting horizontal cybersecurity requirements for „products with digital elements“ — from industrial controllers and software to connected consumer devices. For the first time manufacturers must ensure security across the entire product lifecycle, handle vulnerabilities and provide security updates.

    Read in glossary
    From 11.12.2027, Annex I Part II CRA requires manufacturers of affected products with digital elements to handle vulnerabilities without delay and provide security updates.
    ISO/IEC 27001

    ISO/IEC 27001 is the internationally leading standard for an information security management system (ISMS). It describes a risk-based, process-oriented framework to systematically plan, implement, review and improve information security.

    Read in glossary
    Control A.8.8, management of technical vulnerabilities: assess relevance to your systems, plan remediation and keep evidence.

    Description

    In the Linux kernel, the following vulnerability has been resolved: usb: xhci: bail out of setup if the controller is inaccessible xhci_gen_setup() locates the operational registers using the capability length read from the very first register: xhci->op_regs = hcd->regs + HC_LENGTH(readl(&xhci->cap_regs->hc_capbase)); If the controller is dead or has dropped off the bus, that read returns ~0, HC_LENGTH() truncates it to 0xff, and op_regs ends up 0xff bytes past the page-aligned MMIO base, i.e. unaligned. The first access through it, xhci_halt() -> xhci_handshake() reading op_regs->status, is then an unaligned readl() on device memory. arm64 faults on unaligned device accesses, so instead of xhci_handshake() catching the all-ones value and returning -ENODEV, setup oopses: xhci-pci-renesas 0005:08:00.0: Unable to change power state from D3cold to D0, device inaccessible xhci-pci-renesas 0005:08:00.0: xHCI Host Controller xhci-pci-renesas 0005:08:00.0: new USB bus registered, assigned bus number 1 Unable to handle kernel paging request at virtual address ffff80030a770103 ESR = 0x0000000096000021 FSC = 0x21: alignment fault Internal error: Oops: 0000000096000021 [#1] SMP pc : xhci_halt [xhci_hcd] Call trace: xhci_halt xhci_gen_setup xhci_pci_setup usb_add_hcd usb_hcd_pci_probe xhci_pci_common_probe xhci_pci_renesas_probe This was hit with a Renesas uPD720201 that failed to power up ("Unable to change power state from D3cold to D0, device inaccessible") yet still reached the HCD probe path. Read the capability register once, and if it reads back the all-ones value (as xhci_handshake() and xhci_reset() already test for), abort setup with -ENODEV before op_regs is derived from it. Reading it once also avoids re-reading a register that may change under a concurrent hot-removal.

    Source: HKCERT (CC BY 3.0 HK) · HKCERT rating: medium, Ubuntu Security Notices, Debian LTS Advisories, Debian Security Advisories, ENISA EUVD, cvelistv5, NVD (NIST), CVE.org (MITRE), Microsoft Security Update Guide, BSI WID Portal, BSI CSAF

    Affected products

    The following versions are affected. Older releases of the same product line are also vulnerable unless stated otherwise.

    Affected products
    Affected versionsFixed in
    LinuxLinux
    • 6.13 – < 6.18.51
    • 5.11 – < 5.15.224
    • 5.16 – < 6.1.191
    • 6.2 – < 6.6.158
    • 7.2 – < 7.2.3
    • —
    • 6.19 – < 7.1.13
    • 6.7 – < 6.12.111
    • 2.6.31 – < 5.10.273
    • 6.18.51
    • 5.15.224
    • 6.1.191
    • 6.6.158
    • 7.2.3
    • 7.3
    • 7.1.13
    • 6.12.111
    • 5.10.273
    Red HatOpenShift
    • Container Platform
    • —

    Vendors and products

    Affected operating systems

    Affected operating systems
    Linuxdebianlinuxtrixie
    Linuxubuntulinuxnoble
    Linuxubuntulinuxresolute
    Linuxdebianlinux-6.12bookworm
    Linuxubuntulinux-awsnoble
    Linuxubuntulinux-awsresolute
    Linuxubuntulinux-aws-6.8jammy
    Linuxubuntulinux-aws-7.0noble
    Linuxubuntulinux-aws-fipsnoble
    Linuxubuntulinux-azurenoble
    Linuxubuntulinux-azureresolute
    Linuxubuntulinux-azure-6.8jammy
    Linuxubuntulinux-azure-fdenoble
    Linuxubuntulinux-azure-fderesolute
    Linuxubuntulinux-azure-fde-6.8jammy
    Linuxubuntulinux-azure-fde-7.0noble
    Linuxubuntulinux-azure-fipsnoble
    Linuxubuntulinux-gcpnoble
    Linuxubuntulinux-gcpresolute
    Linuxubuntulinux-gcp-6.8jammy
    Linuxubuntulinux-gcp-7.0noble
    Linuxubuntulinux-gcp-fipsnoble
    Linuxubuntulinux-gkenoble
    Linuxubuntulinux-gkeresolute

    References & sources

    Changes to this CVE

    Who changed this CVE and when: NVD (analysis, affected products, CVSS), the CVE publisher (CNA) and additional providers such as CISA (ADP).

    1. Record modifiedLinux

      Show 4 original changes
      Individual changes of this event as published by NVD
      TypeActionBeforeAfter
      Affected versions (publisher)added
      —
      Affected value modified. <a href="https://github.com/CVEProject/cvelistV5/blob/main/cves/2026/80xxx/CVE-2026-80861.json">CVE-2026-80861</a>
      Referenceadded
      —
      https://git.kernel.org/stable/c/15e62f969fecf459a0b873004cc5f4c5a6ba5fcc
      Referenceadded
      —
      https://git.kernel.org/stable/c/99e78b54cc3d70e008bd1a30d43e13d652c773e0
      Referenceadded
      —
      https://git.kernel.org/stable/c/9f8b403d5f8c1ac361533c73fa449153a3c7fc6c

      Source identifier: 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    2. Record modifiedLinux

      1 individual change: Affected versions (publisher)

      Show the original change
      Individual changes of this event as published by NVD
      TypeActionBeforeAfter
      Affected versions (publisher)added
      —
      Affected value modified. <a href="https://github.com/CVEProject/cvelistV5/blob/main/cves/2026/80xxx/CVE-2026-80861.json">CVE-2026-80861</a>

      Source identifier: 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    3. Record modifiedLinux

      Show 2 original changes
      Individual changes of this event as published by NVD
      TypeActionBeforeAfter
      Affected versions (publisher)added
      —
      Affected value modified. <a href="https://github.com/CVEProject/cvelistV5/blob/main/cves/2026/80xxx/CVE-2026-80861.json">CVE-2026-80861</a>
      Referenceadded
      —
      https://git.kernel.org/stable/c/301f4a3303b21ea959a8294518ee883710498ac2

      Source identifier: 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    4. Record modifiedLinux

      Show 2 original changes
      Individual changes of this event as published by NVD
      TypeActionBeforeAfter
      Affected versions (publisher)added
      —
      Affected value modified. <a href="https://github.com/CVEProject/cvelistV5/blob/main/cves/2026/80xxx/CVE-2026-80861.json">CVE-2026-80861</a>
      Referenceadded
      —
      https://git.kernel.org/stable/c/70706dbcf122940f4e3595d7ba1445004cc00074

      Source identifier: 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    5. ReceivedLinux

      Description added or changed

      Show 5 original changes
      Individual changes of this event as published by NVD
      TypeActionBeforeAfter
      Descriptionadded
      —
      In the Linux kernel, the following vulnerability has been resolved: usb: xhci: bail out of setup if the controller is inaccessible xhci_gen_setup() locates the operational registers using the capability length read from the very first register: xhci->op_regs = hcd->regs + HC_LENGTH(readl(&xhci->cap_regs->hc_capbase)); If the controller is dead or has dropped off the bus, that read returns ~0, HC_LENGTH() truncates it to 0xff, and op_regs ends up 0xff bytes past the page-aligned MMIO base, i.e. unaligned. The first access through it, xhci_halt() -> xhci_handshake() reading op_regs->status, is then an unaligned readl() on device memory. arm64 faults on unaligned device accesses, so instead of xhci_handshake() catching the all-ones value and returning -ENODEV, setup oopses: xhci-pci-renesas 0005:08:00.0: Unable to change power state from D3cold to D0, device inaccessible xhci-pci-renesas 0005:08:00.0: xHCI Host Controller xhci-pci-renesas 0005:08:00.0: new USB bus registered, assigned bus number 1 Unable to handle kernel paging request at virtual address ffff80030a770103 ESR = 0x0000000096000021 FSC = 0x21: alignment fault Internal error: Oops: 0000000096000021 [#1] SMP pc : xhci_halt [xhci_hcd] Call trace: xhci_halt xhci_gen_setup xhci_pci_setup usb_add_hcd usb_hcd_pci_probe xhci_pci_common_probe xhci_pci_renesas_probe This was hit with a Renesas uPD720201 that failed to power up ("Unable to change power state from D3cold to D0, device inaccessible") yet still reached the HCD probe path. Read the capability register once, and if it reads back the all-ones value (as xhci_handshake() and xhci_reset() already test for), abort setup with -ENODEV before op_regs is derived from it. Reading it once also avoids re-reading a register that may change under a concurrent hot-removal.
      Affected versions (publisher)added
      —
      New affected value received. <a href="https://github.com/CVEProject/cvelistV5/blob/main/cves/2026/80xxx/CVE-2026-80861.json">CVE-2026-80861</a>
      Referenceadded
      —
      https://git.kernel.org/stable/c/0b31744f70c5e06cce5fb660e02d057a3b9e0e37
      Referenceadded
      —
      https://git.kernel.org/stable/c/78203d5b54a40f0e36196ebf31c9c7a380fc8811
      Referenceadded
      —
      https://git.kernel.org/stable/c/bf84c6b0264947794fa783c324a6d874ca6657d8

      Source identifier: 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    Embed badge

    Show the severity and KEV status of this vulnerability on your site – with a link back here. The image is updated hourly.

    Badge preview for CVE-2026-80861
    <a href="https://intel.neosec.eu/en/cve/CVE-2026-80861"><img src="https://intel.neosec.eu/badge/cve/CVE-2026-80861.svg?lang=en" alt="CVE-2026-80861 – NEOSEC Intel" height="20"></a>